CET Designer 8.5 Release Notes 20 november 2017 Nyheter & förändringar Uppföljning av höstens omröstning Vi är stolta att meddela att vi har implementerat tre av alternativen som var med i omröstningen tidigare i höst: Omröstningsvinnare: RevLink inkluderar nu material vid export RevLink Extension har nu stöd för att exportera material till Revit 2018. Observera att med detta aktiverat kommer exporten att ta längre tid då materialen gör filen större. Omröstning 2:a plats För möjlighet till ännu bättre filmrenderingar finns nu Produktbelysning med som ett alternativ under Ljusförinställningar i Movie Studio. Omröstning 3:e plats Det är nu möjligt att ändra skala på (nästan) alla kontorstillbehör. 1
Nya kortkommandon Vi har lagt till kortkommandon för några funktioner: o Explodera block (default: Ctrl+Shift+B) o Välj och panorera 2D-vyn till din CAD-nollpunkt (default: Ctrl+H) Lättare att särskilja papper i Pappersvyn Miniatyrerna i pappersvyn visar nu namnet på respektive papper: Det har lagts till knappar för att snabbt kunna hoppa till första/sista papperet i långa serier: Uppdateringar på komponentfliken Verktyg Vi har lagt till nya komponenter för att mäta eller placera ut mått i 3D: 2
Även ett verktyg för att ta bort delar av ett kedjemått. Det går nu att klicka på siffrorna som utgör själva måttet och flytta dem till valfri plats längs måttlinjen. Vi har lagt till möjlighet att ändra färg på måttlinjen och pilarna, samt linjestil på måttlinjen. Nya pilhuvuden har lagts till för pilarna på Verktygs-fliken. Uppdateringar i Kontrollpanelen I Kontrollpanelen finns nu ett nytt val på fliken Avancerat som gör att du själv kan bestämma var mappen CET Documents ska ligga. Detta kan vara till hjälp exempelvis om man har en ITpolicy som innebär att mappen Mina dokument ska ligga på en nätverksplats. 3
På fliken Vyer går det nu att bestämma huruvida insättningshjälpen ska vara aktiv eller inaktiv. Observera att den är aktiv som default. Nytt dörrval samt utseende på fönster För komponenten Dörr går det efter insättning att välja om den ska ha en tröskel eller inte. Efter insättning av fönster går det nu att dubbelklicka på det och välja Glas med valv för att få detta utseende på fönstret: 4
Nedladdning av senaste uppdateringarna utan avbrott Ett nytt system för nedladdning i bakgrunden gör att du inte behöver avbryta ditt arbete för att installera de senaste uppdateringarna. CET Designer sköter detta åt dig, i bakgrunden, och när du vill skifta till den nya versionen klickar du bara på Starta om med uppdateringarna. Ingenting kommer att uppdateras förrän du klicka på knappen, så ingen fara på taket om du behöver starta om som vanligt emellan. Stöd för nya format och versioner CAD-importen stödjer AutoCAD 2018. RevLink har fått stöd för Revit 2018. Vi har lagt till möjligheten att exportera ritningar till formatet.fbx. Ta bort Artikelmärkning eller Alternativ I dialogrutan Artikelmärkning går det att markera och radera flera märkningar samtidigt. I dialogrutan Alternativ finns det nu möjlighet att ta bort ett alternativ utan att behöva markera det först. 5
Stöd för 32-bit borttaget från RevLink och SketchUp Två av våra Extensions, RevLink och SketchUp går nu endast att använda i 64-bitsversionen av CET Designer. Det är inte längre möjligt för oss att stödja dessa Extensions i 32-bit på grund av ändringar som respektive ägare (Autodesk och Trimble) har gjort. Trimble slutade stödja 32-bit med SketchUp 2017. Autodesk slutade stödja 32-bit med Revit 2015. Förbättrad materialhantering i Materiallabbet Om onödigt stora texturer tas in i Materiallabbet kommer CET Designer nu att påtala detta. Vi rekommenderar inte att använda texturer som är större än 1024 px, eller med ett DPI högre än ca 13. CET Designer kan nu optimera texturen automatiskt utifrån dina storleksinställningar, det enda du behöver göra är att klicka på knappen Optimera textur. 6
Solved Issues Fixed problem with PDF import that could in some cases make the picture disappear. Fixed problem with printing of floor plans that contained a PDF image, this could cause the image to wind up at a different location in the printed document. Fixed problem with PDF export that could cause parts of the export to become blurry when image files were present in the floor plan. Fixed problem with resizing of imported PDF file that could cause it to turn red. Fixed issue with loading of drawings with imported PDF, that could cause a crash. Fixed problem with Drag & Drop PDF import onto images placed on architectural walls. Fixed problem with imported PDF files that could cause them to look blurry in the 2D view. Fixed problem with loading of drawings that contained imported PDF images, that could cause the imported PDF image to not load. Fixed problem with resizing of imported PDF that could cause the image to be lost and replaced by the red X placeholder. Fixed problem with replacing imported PDF that could cause the image to become mirrored. Fixed problem with Part Tagging dialog that would cause all categories to always expand when the dialog is opened. Fixed problem with creation of Favorites that could sometimes cause unwanted objects to be included. Fixed problem with renaming Levels through the Level overview, that could cause the cursor to keep jumping to the end of the field. Fixed problem with View Ports that could cause text in the view to move when locking/unlocking viewports. Fixed problem that could cause the order of the View Mode buttons in Paper View to change. Fixed problem that could cause dropdowns from Quick Properties to get misaligned when using multiple monitors. Improvements to DWG handling means importing and handling of some DWG files will now be faster (better handling for lots of Splines). Fixed problem with CAD import that caused load of drawings, containing multiple references to the same DWG file, to be very slow. Fixed problem with architectural doors and windows that could cause them to be filled with wall. Fixed issue with creation of Editable Articles that could cause a crash. Fixed problem that could cause architectural windows to get flipped when moved using Single Select. Fixed problem with copy/paste of objects, such as architectural windows, that could cause attached objects such as blinds or window sills to go missing. Fixed problem that could prevent the color picker tool from working with Custom Shape objects. 7
Fixed problem with the Replicate tools that would not correctly include the original object in the total count, causing overlapping objects. Fixed problem that could cause Edit Graphics objects to become invisible when selecting multiple. Fixed problem that could cause the Radius Dimension to not correctly snap to custom Levels. Fixed problem with Calculation that would cause line count to skip a number when ignoring a line that has a zero item count. Fixed problem with Carpets that could cause them to hide lower parts of some objects near floor level, and caused flickering when viewed from far away. Fixed problem with Calculation that could cause sorting by the Comment column to not work. Fixed problem with the Image on wall object, that would make it not accept material changes to the image frame. Fixed problem with the Image on wall object that could cause it to be invisible when viewed from the back. Fixed problem with pinned tabs that could in rare cases cause them to lose pin status, or come in the wrong order when CET Designer is restarted. Improved 3D performance for Industrial Stairs. Fixed problem with SketchUp Extension that could cause models to repeat more than once in the recent section. It should now be faster to place objects from the recent section in the SketchUp Extension. Fixed several issues with the Render Accelerator that could cause a crash. Fixed problem that could cause the Render Accelerator to get stuck trying to assign jobs to machines that had gone offline. Fixed problem with rendering 360 movies, that could cause an incorrect percentage progress to show when resuming rendering. Fixed issue that could cause Movie Studio to crash if a finished frame got corrupted for any reason. Fixed problem with IFC and RevLink export that could cause minor details to go missing due to Level of Detail dropping parts that would normally be hard to see. Dropped support for Zoho from the CRM Connect Extension. Fixed issue with CRM Connect that could cause a crash when removing certain keys. Fixed problem with Office Accessories, where one of the presentation screens and one of the laptops had incorrect rotation for some of their contents. Fixed problem with Kitchen Accessories glass candle holders that made the glass distort the candles too much during render. Fixed problem with some Kitchen Accessories not being Categorized as Accessories. Fixed problem with some Home Extension beds incorrectly indicating that they belonged to a price list. General speed improvements for DWG and SketchUp import. 8