HT0100 Digital Terrestrial Receiver

Transkript

1 User s Manual HT0100 Digital Terrestrial Receiver English Danish Swedish DT211_ENG_2.indd 1 25/09/ :48:27

2 DT211_ENG_2.indd 27 25/09/ :15:38

3 User s Manual HT0100 Digital Terrestrial Receiver English DT211_ENG_2.indd 1 25/09/ :48:29

4 Safety Instructions Safety Instructions This STB has been manufactured to meet international safety standards. Please read the following safety instructions carefully before you handle the STB. MAIN SUPPLY Adapter Input : AC100~240V, 50/60Hz, 1.0A at AC100V / 0.5A at AC230V STB Input : DC12V, 2A OVERLOADING Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock. LIQUIDS Keep liquids away from the STB. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CABLE Use standard certified cables to prevent any malfunction of the STB. CLEANING Always disconnect the STB power cord from the wall socket before cleaning it. Use a light damp cloth (no solvents) to clean the case. VENTILATION 1. Do not block ventilation slots of STB. 2. Do not place the STB on soft furnishings or carpets. 3. Ensure that a free airflow is maintained around the STB. 4. Do not allow the STB to be exposed to direct sunlight or a heater. 5. Do not stack other electronic equipment on top of the STB. ATTACHMENTS Do not use any attachments that are not recommended. These may cause hazards or damage the equipment. CONNECTION TO THE TERRESTRIAL ANTENNA Disconnect the product from the mains before connecting or disconnecting the cable from the terrestrial antenna. CONNECTION TO A TV Disconnect the product from the mains before connecting or disconnecting the cable from the terrestrial antenna. Failure to do so can damage the TV. ENG-2 DT211_ENG_2.indd 2 25/09/ :48:29

5 Safety Instructions LOCATION Keep the STB indoors and away from potential hazards, such as houseplants, rain and direct sunlight. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that may produce heat, electrical interferences, or strong magnetic fields. LIGHTNING, or NOT IN USE Unplug the product from the wall outlet and disconnect the cable during a lightning storm or when unused for a long time. SMALL OBJECTS Coins or other small objects must be kept away from the STB. They can fall through ventilation slots of the STB and cause serious damage. EARTHLING The antenna cable MUST BE EARTHED to the system earth of the antenna. The grounding system must comply with national standards for electrical safety. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not bedisposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle itresponsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased thisproduct, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditionsof the purchase contract. This product should not be mixed with other commercial wastes for disposal. English ENG-3 DT211_ENG_2.indd 3 25/09/ :48:29

6 Contents General Features... 5 Accessories... 5 General Description of Your STB Front Panel Rear Panel Remote Control Unit...7 Connecting Your STB Location of the STB Connecting the STB with a terrestrial antenna Connecting the STB to a TV Connecting digital audio system...9 Basic Operation Changing Service Volume Control Info Bar General Information Detailed Service Information Selecting the audio mode Selecting the Subtitle Selecting the Teletext Setting the Sleep timer Pause Service List Add to Favorite List Sorting Service list Programme Guide (EPG) Timer Reservation Main Menu Information...14 Menu Map Main Menu Service Manager Total List Edit services - Lock/Unlock Edit services - Skip/Unskip Edit services - Add to Favorite Services Edit services - Rename a service (or Favorite service list) Sort services Delete services Live Parental Lock Access Lock Menu Lock Change Password Installation Service Search Delete All Services Factory Reset System Setting Language Setting AV Output Settings Time Settings OSD Settings S/W Update System Information Miscellaneous Utility...23 Troubleshooting Specifications Memo ENG-4 DT211_ENG_2.indd 4 25/09/ :48:29

7 General Features And Accessories General Features Accessories Reception of Standard Definition Digital TV program MPEG-2 / MPEG-4 Digital Terrestrial Receiver with USB Fully compliant with DVB-T Favorite service list editing True color On Screen Display (OSD) Full Picture In Graphic (PIG) function Electronic Program Guide (EPG) for on screen service information Multilingual menu, audio and subtitle (for English, Danish, Swedish) Teletext supported by software emulation DVB subtitle support Parental lock facility by service and program event S/PDIF for Dolby AC-3 bit stream output Fast software upgrade via USB storage RF Modulator (CH21~69) 4:3 or 16:9 video aspect ratio Remote Control Unit with 2 X AAA type batteries. User Manual English ENG-5 DT211_ENG_2.indd 5 25/09/ :48:30

8 General Description of Your STB General Description of Your STB 3.1 Front Panel Rear Panel VOL (+/-) buttons: Adjusts volume and moves the cursor left or right in the menu 2. CH ( / ) buttons: Changes services or moves the cursor up or down in the menu. 3. LED: Displays Stand-by On (Green) / Off (Red). 4. Stand-by button: Switches between Stand-by and power on. 5. IR Sensor: Receives the IR commends from remote control unit ANT IN: Connect to the terrestrial antenna. 2. USB: Connect to an external USB memory device. 3. SCART for TV: Connect to a TV with a SCART cable. 4. SCART for VCR: Connect to a VCR (AUX) with a SCART cable. 5. RF OUT: Connect to a TV with an antenna cable. 6. AUDIO (L/ R): Connect to audio input on a TV or any external audio system. 7. LOOP OUT: Connect to another terrestrial receiver (if available). 8. RF IN: Connect to the RF out of a VCR or another STB. 9. S/PDIF: Connect to digital audio component with an optical cable. 10. DC INPUT: Connect to the power adapter supplied. ENG-6 DT211_ENG_2.indd 6 25/09/ :48:30

9 General Description of Your STB 3.3 Remote Control Unit POWER ( ) button: Switches between operation and standby mode. MUTE button: Mutes audio output (to cancel, press the Mute button again, -/+ buttons, or arrow ( / ) buttons NUMERIC (0~9) button: Controls the numerical operation and service numbers. EPG button: Opens Electronic Program Guide. TTX. button: Changes to a teletext mode. Mosaic ( ) button: Reserved Radio ( ) button: Switches between TV and Radio service Subt. (WHITE) button: Opens subtitle menu Back button: Goes to previous menu Menu button: Opens the main menu Exit button: Exits from the current menu Arrow ( / / / ) buttons / OK button / : Adjusts volume level or moves the cursor left or right in the menu. / : Changes a service or moves the cursor up or down in the menu. OK: Confirms selection or opens service list Audio (RED) button: Opens a menu for the available audio mode Timer (GREEN) button: Opens a menu for time settings. Last (YELLOW) button: Opens a list of previous services i (BLUE) button: Opens available service information. English ENG-7 DT211_ENG_2.indd 7 25/09/ :48:31

10 General Description of Your STB -/+ buttons: Adjusts volume level. Page Up/Down ( ) buttons: Moves a page up or down on the menu. REC ( ) button: For USB PVR model only. Stop ( ) button: For USB PVR model only. Play/II ( ) button: For USB PVR model only. Slow ( ) button: For USB PVR model only. Pre (I ) button: For USB PVR model only. Next ( I) button: For USB PVR model only. REW ( ) buttons: For USB PVR model only. FF ( ) button: For USB PVR model only. Pause button: Pauses the service. List button: Reserved. TV/SAT button: Switches between TV and AV modes. Sleep button: Opens sleep timer menu. V-Format button: Reserved. Find button: Reserved. Memo button: Reserved. F1 button: Reserved. The picture shown left might be different from the Remote Control Unit supplied. Insert batteries Before using the Remote Control Unit first time, please insert the supplied batteries according to the instructions below: 1. Open the battery compartment on the back of the Remote Control Unit. 2. Install two AAA size batteries. Make sure that the (+) and (-) terminals are aligned correctly. 3. Close the cover. ENG-8 Replacement Always replace 2 batteries at the same time (mixing old and new batteries or mixing different types will reduce overall performance and could cause leakage or rupture). Batteries should be disposed of separately. (Check with your local authority regarding waste disposal). DT211_ENG_2.indd 8 25/09/ :48:31

11 Connecting Your STB Connecting Your STB 4.1 Location of the STB Place the STB in horizontal position. Do not put any heavy item such as a TV on the STB. Install the STB close to the AC power socket (the AC power socket shall be easily accessible). Do not install the STB on places such as; vibrating place, direct sunrays, humid place, too high or low temperature, or no ventilated place. 4.2 Connecting the STB with a terrestrial antenna After installing your antenna system, connect the coaxial cable from your antenna to ANT IN terminal marked at the rear panel of the STB. All cable connectors should be finger tightened; do not use any kind of wrench while tightening connectors. The cable should be 75ohm impedance coaxial twisted at the end with an F type connector. English 4.3 Connecting the STB to a TV Connect the SCART port marked TV at the rear panel of the STB to the respective SCART port on a TV with a SCART cable. 4.4 Connecting digital audio system Connect the audio system to the S/PDIF (with an optical cable) on the STB. ENG-9 DT211_ENG_2.indd 9 25/09/ :48:31

12 Basic Operation Basic Operation This section explains various function while watching TV or listening to Radio. 5.1 Changing Service You can change a service with three different methods. Method1: Press the Arrow ( / ) buttons. Method2: To select a service directly, press the service number using the Numeric (0~9) buttons. Method3: Press OK, and select a service from the list.(to display the service list, press the OK button. Select a service you want to watch / listen to using the Arrow ( / / / ) buttons, and press OK button. Use the Page up/down ( / ) buttons to go to previous or next page. Press the Radio ( ) button to switch between the TV service and Radio service.) 5.2 Volume Control To control the volume: 1. Press the Arrow ( / ) buttons or (+/-) buttons. 2. Press the Mute ( ) button to turn the sound off. 3. Press the Mute ( ) button again or the Arrow ( / ) buttons or (+/-) buttons to cancel muting. 5.3 Info Bar General information always appears for a specific period of time whenever you switch a service. 5.4 General Information Press the Info (i) button; it displays general information of the current service such as the service number and name, current date and time, signal level and quality. Icons are automatically highlighted when the current broadcasting program provides appropriate information such as subtitle, teletext, scrambled service, locked service, etc. 5.5 Detailed Service Information You can see detailed information on the current program by pressing the Info (i) button again. Using the Arrow ( / ) buttons, you can move Present/Follow service information. This service is available when the service provider supports detailed service information. ENG-10 DT211_ENG_2.indd 10 25/09/ :48:32

13 Basic Operation 5.6 Selecting the audio mode When the current broadcasting service provides this feature, you can select the audio language and audio mode. Press the Audio (RED) button. Press the Arrow ( / ) buttons to select the audio mode among the Stereo, Mono (L), Mono (R) or AC3. Press the Arrow ( / ) buttons to select the desired audio language. To return to viewing mode, press the Audio (RED) button again or press the Exit button. Note: You can select your desired default audio language by selecting the Main menu System Setting Language Audio. When selecting AC3 and connecting a Dolby Digital or Linear PCM Stereo equipment to the DIGITAL AUDIO Output jack on the rear panel, the analogue audio output services are disabled. 5.7 Selecting the Subtitle When the current broadcasting service provides subtitle, you can select the subtitle. Press the Subt. (WHITE) button. Press the Arrow ( / ) buttons to turn on/off the subtitle. Press the Arrow ( / ) buttons to select the desired subtitle. The subtitle displays in the selected language at the bottom of the screen. Select Off from the subtitle languages list not to display subtitle from the screen. To return to viewing mode, press the Subt. (WHITE) button again or press the Exit button. Note: You can select a default subtitle language by selecting the Main menu System Setting Language Subtitle. 5.8 Selecting the Teletext Press the TTX. (Teletext) button on the RCU. Teletext information such as news, weather, sports scores etc. will be displayed on the screen. If current service has teletext otherwise it will show No Teletext message. English Use the Arrow ( / ) buttons to select previous and next pages. Use the RED button to go to previously selected pages (100). Use the GREEN button to select the index page (100). Use the YELLOW button to go to previous page. To change the background to transparent, use the BLUE button. Note: This STB allows you to view Teletext information even if your TV does not support the function. ENG-11 DT211_ENG_2.indd 11 25/09/ :48:32

14 Basic Operation 5.9 Setting the Sleep timer Press the Sleep button. Press the Arrow ( / ) buttons to set the sleep timer. Your STB automatically turns off after a preset time interval ( min Off) Pause To pause on the current scene, press the Pause button (still picture) Service List You can see the TV or Radio Service List by pressing the OK button while watching TV or listening to the Radio (to switch the service list between TV and Radio, pressing the Radio ( ) button). The ( ) icon next to the service name symbolizes a scrambled service, and the ( ) icon for a locked service. Find a service by pressing Arrow ( / / / ) buttons or Page up/down ( / ) buttons, and press the OK button to select the service. Go to Service Manager Press the RED button to go to the service manager (refer to page 18). Move to Favorite List Press the BLUE button to switch among the total list and favorite lists Add to Favorite List You can add services into desired Favorite Lists. Press the GREEN button. Select a Favorite List using the RED button. Select the services that you want to add into the Favorite List using the Arrow ( / ) buttons, then press OK button. ENG-12 DT211_ENG_2.indd 12 25/09/ :48:32

15 Basic Operation 5.13 Sorting Service list You can sort the list by service number, alphabetical order, scrambled / FTA, locked services. Press the YELLOW button. Select a sorting type using the color buttons, then press OK button. RED button: Sort by service (channel) number GREEN button: Sort by alphabetical order YELLOW button: Sort by scrambled / FTA BLUE button: Sort by locked services WHITE button: Restore 5.14 Programme Guide (EPG) EPG displays service information such as service titles, broadcast schedule, service synopsis, and etc. when they are available by the service provider. Press the EPG button while watching a TV service or listening to a Radio service. The EPG (Electronic Program Guide) window will appear. Select a service you want to see more information. RED button: Switches between Weekly Mode and Grid (Daily) Mode. Arrow ( / ) buttons: Moves up and down. Arrow ( / ) buttons: Selects an event by time & date within the same service. It displays the service list by 30 minutes per block. You can select up to seven days from today. Green button: Reserves a service you selected (exit the EPG mode, and press the Timer button to see the reserved list). OK button: Displays a synopsis of the selected service. To exit from the EPG mode, press the EPG button again or press the Exit button. English ENG-13 DT211_ENG_2.indd 13 25/09/ :48:32

16 Basic Operation 5.15 Timer Reservation You can reserve programs on the Timer Setting menu up to 10 events. Press the GREEN (Timer) button. The message Please set clock time first appears followed by the User Time Setting screen. Set user time according to the current time. If the user time is already set, this step will be skipped. When the Timer List screen appears select a blank position and then press the OK button. The Timer Setting window appears. Set the options using the Arrow ( / ) buttons and numeric buttons.the options: Service, Date, Start time, End time and Type (Once, Daily, Weekly) When the settings are completed, select Timer using the Arrow ( / ) buttons, and then press the OK button. You can check the timer settings from the Timer List. Note: A message appears one minute before the set time, asking whether or not to proceed with the timer. To proceed, press OK, and to cancel, press Exit Main Menu Information The Main Menu consists of Service Manager / Installation / System Setting / Utility. Press the Menu button. Select your desired menu using the Arrow ( / ) buttons. You can select the sub menu items using the Arrow ( / ) buttons and OK button. Select the required subject menu using the Arrow ( / ) buttons. Select the item you want using the Arrow ( / ) buttons When you want to return to the previous menu with saving the change, press the Back button. If you want to exit from the current menu, press the Exit button. ENG-14 DT211_ENG_2.indd 14 25/09/ :48:32

17 Menu Map Menu Map Service Manager Total List Parental Lock Access Menu Change Password Installation Service Search Delete All Services Factory Reset System Setting Language Menu Audio Subtitle A/V Output TV Type Video Output TV Aspect Ratio TV Display Type RF Output RF Channel Time Time Setting Mode Time Zone Summer Time User Time Setting OSD Banner Time Transparency English S/W Update Miscellaneous System Update System Information Radio Screen ENG-15 DT211_ENG_2.indd 15 25/09/ :48:33

18 Main Menu Main Menu 7.1 Service Manager You can edit TV and Radio services and the favorite service group in this menu. To access Service Manager mode; Press the Menu button Select Service Manager using the Arrow ( / ) buttons Select Total List using the Arrow ( / ) buttons, and then press the OK button. You can also access the Service Manager mode by pressing the RED button on the total service list. Select the service you want to edit using the Arrow ( / / / ) buttons, and then press the OK button. Arrow ( / ) buttons: Select a favorite list Arrow ( / ) buttons: Select a service RED button: Toggle select all service and unselect all service Press the GREEN button (Edit window appears). 7.2 Total List Edit Services Lock / Unlock You can lock or unlock one or more services (you can lock the services to prohibit unauthorized users from watching specific services. Whenever you want to see the locked service you will be prompted to enter the password in the dialog box). Select Lock using the Arrow ( / ) buttons, and then press the Arrow ( ) button. Select Lock using the Arrow ( / ) buttons, and then press the OK button. Press the Exit button to save. The lock symbol ( ) is marked next to the service name Edit services Skip / Unskip You can skip a particular service with the use of this function (the skipped services can not be selected during the service up or down). Select Skip using the Arrow ( / ) buttons, and then press the Arrow ( ) button. Select Skip using the Arrow ( / ) buttons, and then press the OK button. ENG-16 Press the Exit button to save DT211_ENG_2.indd 16 25/09/ :48:33

19 Main Menu Edit Services Add to Favorite Lists You can add services into the desired Favorite Lists. Select Add using the Arrow ( / ) buttons, and then press the Arrow ( ) button. Select your desired favorite service list using the Arrow ( / ) buttons, and then press the OK button. Press the Exit button to save Delete Services You can delete one or more services. Select the service you want to delete using the Arrow ( / / / ) buttons, and then press the OK button. You can select multiple services. Press the GREEN button. Select Delete button Press the OK button Edit Services Rename a service You can change the service name as you desire. Select Rename using the Arrow ( / ) buttons, and then press the Arrow ( ) button. Select your desired favorite list or service using the Arrow ( / ) buttons, and then press the OK button. Rename keyboard screen appears. Select letter using the Arrow ( / / / ) buttons and add a letter with OK button. Press the Exit button to save Sort Services You can sort the list by channel number, alphabetical order, scrambled / FTA, locked services. Select the favorite list you want to sort using the Arrow ( / ) buttons, and then press the YELLOW button. Select the sorting type you want to using the Arrow ( / / / ) buttons, and then press the OK button. Press the Exit button to save Live You can watch or listen to the live broadcasting of the selected service through PIG window. Also, information of the channel and service is displayed in the lower part of PIG window. Select the service you want to view using the Arrow ( / / / ) buttons, and then press the OK button. Press the WHITE button. Selected program is on PIG window. ENG-17 English DT211_ENG_2.indd 17 25/09/ :48:33

20 Main Menu 7.3 Parental Lock To access Parental Lock: Press the Menu button. Select Service Manager using the Arrow ( / ) buttons. Select Parental Lock using the Arrow ( / ) buttons, and then press the OK button Access Lock If you select On, you will have to enter the password every time you start the STB from standby. Select Access using the Arrow ( / ) buttons on the Parental Lock menu, and set it to On using the Arrow ( / ) buttons Menu Lock If you select On, you will have to enter the password every time you access main menu. Select Menu using the Arrow ( / ) buttons on the Parental Lock menu, and set it to On using the Arrow ( / ) buttons Change Password You can change your password from the factory default value 0000 as follows: Select Change Password using the Arrow ( / ) buttons on the Parental Lock menu, and then press the OK button. Change Password dialog box appears. Enter the Old Password using the numeric (0~9) button. Enter the New Password. Enter the Confirm Password (the new password again to confirm). Note: Please keep in mind that the password must be a four-digit number. In case you forgot your password, contact your local dealer. 7.4 Installation In the Installation menu, you can customize service search, delete all services, and do factory reset. To access Installation: Press the Menu button. Select Installation using the Arrow ( / ) buttons. ENG-18 DT211_ENG_2.indd 18 25/09/ :48:33

21 Main Menu 7.5 Service Search Before watch TV or listen to Radio, you have to search the services first. Options are given to search all available services or specific services only. Press the Menu button. Select Installation using the Arrow ( / ) buttons. Select Service Search using the Arrow ( / ) buttons, and then press the OK button. Select Auto or Manual for your search. Set Booster according to your system. Press the RED button to start search. After the auto search completes, you can see TV and Radio services in the list. Note: Please wait for the STB to complete searching all the services. Depends on the available services, it may take some minutes or longer. 7.6 Delete All Services You can delete all services. Select Delete All Services using the Arrow ( / ) buttons on the Installation menu and press the OK button. A System message dialog box appears asking you to confirm. Input your password using the numeric button to delete all services. 7.7 Factory Reset This mode is to restore the factory reset values. Select Factory Reset using the Arrow ( / ) buttons on the Installation menu and press the OK button. System message dialog box appears asking you to confirm. Input your password using the numeric button. All preset information will be formatted. English Caution: This causes your previous settings to be deleted and default setting to be loaded. 7.8 System Setting In the Installation menu, you can customize Language Setting, A/V Output, Time Setting, OSD Setting, S/W Update, Miscellaneous settings. ENG-19 DT211_ENG_2.indd 19 25/09/ :48:33

22 Main Menu 7.9 Language Setting You can set languages for Menu, Audio, and Subtitle. Press the Menu button. Select System Setting using the Arrow ( / ) buttons on the main menu. Select Language using the Arrow ( / ) buttons on the System Setting menu and press the OK button. Select any of Menu, Audio, and Subtitle using the Arrow ( / ) buttons and use the Arrow ( / ) buttons to select it s language AV Output Settings You can set various video settings for Video Output, TV Aspect Ratio, and TV Display Format. Select Video using the Arrow ( / ) buttons on the System Setting menu and press the OK button. Select any of TV Type, Video Output, TV Aspect Ratio, TV Display Type, RF Output, RF Channel. TV Type: It is fixed at PAL. Video Output: You can select between CVBS and RGB TV Aspect Ratio: You can select the aspect ratio of your TV (4:3 or 16:9). TV Display Type: You can select the display type according to TV screen ratio. If the TV Aspect Ratio is set to 4:3, you can select one from Auto / Letter Box / Center Mode using the Arrow ( / ) buttons. If the TV Aspect Ratio is set to 16:9, you can select one from Full Mode using the Arrow ( / ) buttons. RF Output: You can select among NTSC-M / PAL-BG / PAL-I / PAL-DK. RF Channel: You can set the output channel number from 21 ~ 69. ENG-20 DT211_ENG_2.indd 20 25/09/ :48:34

23 Main Menu 7.11 Time Settings You can set the Time Zone, Summer Time, and User Time Setting. Select Time using the Arrow ( / ) buttons on the System Setting menu and press the OK button. Select any of Time Zone, Summer Time, and User Time Setting using the Arrow ( / ) buttons and use the Arrow ( / ) buttons to make changes. Time Zone: The local time will be automatically changed by this setting. Summer Time: You can select the summer time on or off. User Time Setting: You can set the current time of your local area time in this setting. To set the current time (local area time) Select User Time Setting using the Arrow ( / ) buttons on the System Setting menu, and then press the OK button. Time setting window appears. Set the Year, Month, Day, Hour, and Minute using the Arrow ( / ) buttons and numeric buttons. Select Save using the Arrow ( / ) buttons and then press the OK button OSD Settings You can adjust OSD Banner Time and OSD Transparency. Select OSD using the Arrow ( / ) buttons on the System Setting menu, and then press the OK button. Select any of Banner Time and Transparency using the Arrow ( / ) buttons to make changes. Banner Time: 2 to 8 secs Transparency: 0 (opaque) to 80% English ENG-21 DT211_ENG_2.indd 21 25/09/ :48:34

24 Main Menu 7.13 S/W Update You can check system information like Model Name, Software Version, Software Date, etc. You can also upgrade the software of your STB through USB memory device if new software is available for your STB. Select S/W Update using the Arrow ( / ) buttons on the System Setting menu, and then press the OK button. Select System Update, and press OK if you want to upgrade the software. Select USB, and find new software that you saved on the USB memory device. Press OK to start, or Back to cancel. Caution: Do not turn off your STB during software upgrade. It may cause a serious damage to the STB System Information You can check system information like Model Name, Software Version, Software Date, etc. ENG-22 DT211_ENG_2.indd 22 25/09/ :48:34

25 Main Menu 7.15 Miscellaneous Radio Screen: Screen picture is displayed when you listen to the music at the music at the Radio service mode with set on. Note: Other settings might be available in the future Utility Calendar: A calendar is displayed when you select. Arrow ( / ) buttons: moves to previous year / next year Arrow ( / ) buttons: moves to previous month / next month OK button: moves back to today. Note: Other utilities might be available in the future. English ENG-23 DT211_ENG_2.indd 23 25/09/ :48:34

26 Troubleshooting Digital communications involve simultaneous transfer and processing of large amounts of data. Changing services may take longer in comparison to analogue devices. Also, digital STBs are close relatives to personal computers, and their lifestyle is somehow similar. it may happen to a digital STB that it hangs up like a PC without prior warning and without a visible reason. If this should happen please disconnect the STB from the wall outlet. After switching the STB on again, all functions should be restored. Problem No Video Solution Service data might have changed. Execute Factory Reset or Service Search. No Audio Receiver fails to boot Service search fails Screen continuously shows No Signal Video freezes Remote Control Unit does not work Check the volume control and MUTE function. Check Audio Language, Press Audio key and try to change the language Check Main Audio language in menu. Plug out the AC power, and in again. Contact A / S Center if this problem occurs continuously. Check terrestrial antenna cable connection. Check terrestrial antenna cable connection. Try Service Search of the service showing No Signal. Weak antenna signal. Check antenna position and weather condition Aim the receiver front panel correctly, or get closer (below 7 meters). Check if the battery of Remote Control Unit is still good. No OSD menu visible Software upgrade through USB port does not work Malfunction after update Check connectors between your STB and TV. Check if the USB memory device is correctly attached. Check if the new software is saved correctly. Execute Factory Reset. This causes your previous settings to be deleted and default settings to be loaded. ENG-24 DT211_ENG_2.indd 24 25/09/ :48:34