GA-8VM800M-775 Intel Pentium 4 LGA775 Rev. 1001 12MC-VM800MT-1001R
Motherboard GA-8VM800M-775 Aug. 18, 2005 Motherboard GA-8VM800M-775 Aug. 18, 2005
2005 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. http://www.gigabyte.com.tw
GA-8VM800M-775... 6... 7... 9 1-1... 9 1-2... 10 1-3... 12 1-3-1... 12 1-3-2... 13 1-4... 14 1-5... 15 1-6... 16 1-7... 17... 29 ( E12)... 30 2-1 Standard CMOS Features ( CMOS )... 32 2-2 Advanced Features ( )... 34 2-3 Integrated Peripherals ( )... 36 2-4 Power Management Setup ( )... 38 2-5 PnP/PCI Configurations ( PCI )... 40 2-6 PC Health Status ( )... 41 2-7 Frequency / Voltage Control ( / )... 42 2-8 Load Fail-Safe Defaults ( Fail-Safe )... 44 2-9 Load Optimized Defaults ( Optimized )... 44 2-10 Set Supervisor/User Password ( / )... 45 2-11 Save & Exit Setup ( SETUP )... 46 2-12 Exit Without Saving ( SETUP )... 46-4 -
... 49 3-1... 49 3-2... 50 3-3... 50 3-4... 51 3-5... 51... 53 4-1... 53 4-1-1 EasyTune 5... 54 4-1-2 Xpress Recovery... 55 4-1-3... 58 4-1-4 Serial ATA RAID... 67 4-1-5 / /... 74 4-2... 82-5 -
- 6 - GA-8VM800M-775 KB_MS COMA LPT LGA775 CPU_FAN ATX FDD VGA COMB ATX_12V SPDIF_IO CI PWR_LED PCI3 F_USB1 F_PANEL VT8237R F_USB2 BAT PCI2 CODEC SUR_CEN CLR_CMOS CD_IN SATA1 SATA0 SYS _FAN PCI1 W83627 GA-8VM800M-775 F_AUDIO USB IDE2 IDE1 AGP DDR1 VIA P4M800 LAN AUDIO USB DDR2 RTL8100C AUX_IN
LGA 775 Processor CPUCLK+/- (133/200MHz) AGP 4X/8X VGA Port System Bus 533/800MHz 266/333/400MHz AGPCLK (66MHz) 3 PCI PCICLK (33MHz) RJ45 RTL8100C AC97 Link 6 Channel CODEC MIC LINE-IN LINE-OUT VIA P4M800 66MHz V_Link VIA VT8237R 8 USB Ports GCLKNB 66MHz 48MHz LPC BUS ATA33/66/ 100/133 IDE Channels 33MHz 14.318MHz DDR HCLK (200/133MHz) Winbond W83627 2 Serial ATA Floppy LPT Port PS/2 KB/Mouse 48 MHz 33 MHz COMA/COMB - 7 -
- 8 -
1-1 1. 2. 3. (CPU RAM) 4. 5. 1. 2. 3. 4. 5. 6. 7. 8. - 9 -
1-2 Intel Pentium 4 LGA775 533/800MHz FSB L2 CPU : VIA P4M800 : VIA 8237R 2 184-pin DDR DIMM DDR400/333/266 DIMM 2GB DRAM 1 AGP AGP 4X/8X (1.5V) 3 PCI IDE 2 IDE (UDMA 33/ATA 66/ATA 100/ATA 133) 4 IDE SATA 2 Serial ATA ( ) 1 1 1 Normal/EPP/ECP 1 VGA 1 COMA COMB 8 USB 2.0/1.1 ( x 4 x 4-- ) 1 1 PS/2 1 PS/2 VIA P4M800 RTL8100C 1 RJ45 Realtek ALC655 CODEC Line In ; Line Out ; MIC In 2/4/6 SPDIF / CD In / AUX In Jack Sensing (Connector Sensing) I/O Winbond W83627 CPU / CPU / CPU ( ) SATA 1.5 Gb/s GA-8VM800M-775-10 -
SATA RAID VT8237R Disk striping (RAID0) DISK Mirroring (RAID1) UDMA 150 MB/sec 2 SATA AWARD Q-Flash @ EasyTune ( ) (CPU/DRAM) (AGP/DIMM) Micro-ATX ; 24.4 x 23.3 ( ) EasyTune - 11 -
1-3 1. 2. (CPU) 3. 4. 5. HT Technology) HT Intel Pentium 4 HT HT HT (Hyper-Threading 1-3-1 1. 2. 3. 4. ( ) ( ) GA-8VM800M-775-12 -
1-3-2 1. 2. ( ) ( Intel ) 3. 4. ( ) 5. 6. CPU - 13 -
1-4 1. 2. 3. 2 (DIMM) DIMM NEC Toshiba PQI Winbond DDR 1. 2. GA-8VM800M-775-14 -
1-5 1. 2. ( ) 3. 4. 5. 6. 7. 8. AGP / AGP - 15 -
1-6 PS/2 ( ) PS/2 PS/2 ( ) A (USB) USB USB / USB USB USB USB Fast Ethernet 10/100Mbps ( ) GA-8VM800M-775-16 -
1-7 3 2 5 1 6 4 10 7 11 19 9 8 12 14 13 16 17 18 15 1) ATX_12V 2) ATX (Power Connector) 3) CPU_FAN 4) SYS_FAN 5) FDD 6) IDE1/IDE2 7) SATA0 / SATA1 8) F_PANEL 9) PWR_LED 10) F_AUDIO 11) CD_IN 12) AUX_IN 13) SPDIF_IO 14) SUR_CEN 15) F_USB1 / F_USB2 16) COMB 17) CI 18) CLR_CMOS 19) BAT - 17 -
1/2) ATX_12V/ATX ATX_12V CPU ATX_12V 300 4 2 3 1 1 2 3 +12V 4 +12V 11 20 1 10 1 3.3V 2 3.3V 3 4 +5V 5 6 +5V 7 8 Power Good 9 5V SB (stand by +5V) 10 +12V 11 3.3V 12-12V 13 14 PS_ON(soft on/off) 15 16 17 18-5V 19 +5V 20 +5V GA-8VM800M-775-18 -
3/4) CPU_FAN / SYS_FAN ( CPU_FAN +12V 3-pin/4-pin +12V (GND) CPU 1 CPU_FAN 1 SYS_FAN 1 2 +12V 3 4 CPU_FAN 5) FDD ( ) 360KB 720KB 1.2MB 1.44MB 2.88MB 34 33 2 1-19 -
6) IDE1/IDE2 (IDE ) IDE IDE IDE IDE IDE ( ) IDE Master Slave ( IDE ) 40 39 40 39 2 1 2 1 IDE IDE 7) SATA0/SATA1 (Serial ATA ) Serial ATA 150MB Serial ATA 1 7 1 2 TXP 3 TXN 4 5 RXN 6 RXP 7 GA-8VM800M-775-20 -
8) F_PANEL ( ) Message LED/ Power/ Sleep LED Speaker Connector Power Switch 2 1 20 19 HD- RES+ HD+ RES- NC MSG- MSG+ SPEAK- PW- PW+ SPEAK+ Reset Switch IDE Hard Disk Active LED HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(-) SPEAK (Speaker Connector) Pin 1: Pin 2- Pin 3: Pin 4: Data(-) RES (Reset Switch) Open: Normal Close: Reset Hardware System PW (Power Switch) Open: Normal : Close: Power On/Off : / MSG(Message LED/Power/Sleep LED) Pin 1: LED anode(+) Pin 2: LED cathode(-) NC - 21 -
9) PWR_LED PWR_LED ON OFF Power LED Suspend 1 1 MPD+ 2 MPD- 3 MPD- 10) F_AUDIO ( ) Pin5-6 Pin9-10 Jumper 10 9 2 1 1 MIC 2 3 MIC_BIAS 4 5 Front Audio(R) 6 Rear Audio (R)/ Return R 7 8 9 Front Audio (L) 10 Rear Audio (L)/ Return L GA-8VM800M-775-22 -
11) CD_IN ( ) CD-ROM DVD-ROM CD 1. 1 CD-L 2 3 4 CD-R 12) AUX_IN ( ) MPEG 1 1 AUX-L 2 3 4 AUX-R - 23 -
13) SPDIF_IO (SPDIF / ) Sony/Philip Digital Interface Format / SPDIF IN & SPDIF OUT SPDIF IN (SPDIF Out) SPDIF AC-3 AC-3 (SPDIF In) SPDIF ; SPDIF 2 1 6 5 1 2 3 SPDIF 4 SPDIFI 5 6 14) SUR_CEN ( ) SUR_CEN 2 1 6 5 1 SUR OUTL 2 SUR OUTR 3 4 5 CENTER_OUT 6 BASS_OUT GA-8VM800M-775-24 -
15) F1_USB / F2_USB ( ) USB USB 2 10 1 9 1 2 3 USB0 DX- 4 USB1 Dy- 5 USB0 DX+ 6 USB1 Dy+ 7 8 9 10 16) COMB ( B ) 2 1 10 9 1 NDCD B- 2 NSIN B 3 NSOUT B 4 NDTR B- 5 6 NDSR B- 7 NRTS B- 8 NCTS B- 9 NRI B- 10-25 -
17) CI ( ) 1 1 2 18) CLR_CMOS ( CMOS 1-2 CMOS CMOS 1 1 CMOS GA-8VM800M-775-26 -
19) BAT ( ) 1. 2. ( CMOS... 3. 4. ) - 27 -
GA-8VM800M-775-28 -
(Basic Input and Output System) CMOS SETUP CMOS SETUP CMOS SRAM CMOS SRAM POST (Power-On Self Test ) <Del> CMOS SETUP "Ctrl + F1" Q-Flash TM @ TM Q-Flash TM @ TM < > <Enter> <Esc> SETUP <Page Up> <Page Down> <F1> <F2> <F5> ( ) <F6> Fail-Safe ( ) <F7> Optimized ( ) <F8> Q-Flash <F9> <F10> CMOS SETUP SETUP SETUP <F1> CMOS SETUP <Esc> - 29 -
CMOS SETUP ( E12) <Enter> Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... "Ctrl + F1" Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) IDE SATA USB IEEE1394 COM port LPT port AC97 Power Management Setup ( ) CPU PnP/PCI Configuration ( PCI ) ISA PnP PCI PC Health Status ( ) Frequency / Voltage Control ( / ) CPU Load Fail-Safe Defaults ( Fail-Safe ) CMOS GA-8VM800M-775-30 -
Load Optimized Defaults ( Optimized ) CMOS Set Supervisor Password ( ) Set User Password ( ) PC Save & Exit Setup ( ) SETUP <F10> Exit Without Saving ( SETUP ) SETUP <ESC> CMOS - 31 -
2-1 Standard CMOS Features ( CMOS ) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Standard CMOS Features Date (mm:dd:yy) Wed, May 11 2005 Time (hh:mm:ss) 10:40:9 IDE Channel 0 Master [None] IDE Channel 0 Slave [None] IDE Channel 1 Master [None] IDE Channel 1 Slave [None] IDE Channel 2 Master [None] IDE Channel 3 Master [None] Drive A [1.44M, 3.5"] Floppy 3 Mode Support [Disabled] Halt On [All, But Keyboard] Item Help Menu Level Change the day, month, year <Week> Sun. to Sat. <Month> Jan. to Dec. <Day> 1 to 31 (or maximum allowed in the month) Base Memory Extended Memory Total Memory 640K 127M 128M <Year> 1999 to 2098 : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) ( ) / Time (hh:mm:ss) ( ) / / / 24 (mm) 1 12 (dd) 1 28/29/30/31 (yy) 1999 2098 / / IDE Channel 0/1 Master, Slave ( / IDE ) IDE HDD Auto-Detection "Enter" IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave / IDE None IDE None Auto POST IDE ( ) Manual Access Mode CHS/ LBA/ Large/ Auto ( Auto) IDE Channel 2/3 Master ( IDE ) IDE HDD Auto-Detection "Enter" Extended IDE Drive / IDE None IDE None Auto POST IDE ( ) GA-8VM800M-775-32 -
Access Mode Large/ Auto ( Auto) Capacity Cylinder Head Precomp Landing Zone Sector Precompensation Drive A ( A: ) None None 360K, 5.25" 5.25 360KB 1.2M, 5.25" 5.25 1.2MB 720K, 3.5" 3 720KB 1.44M, 3.5" 3 1.44MB 2.88M, 3.5" 3 2.88MB Floppy 3 Mode Support ( 3 Mode ) Disabled 3 Mode Drive A A: 3 Mode Halt on ( ) POST No Errors All Errors All, But Keyboard ( ) All, But Diskette All, But Disk/Key Memory ( ) POST(Power On Self Test) STANDARD CMOS SETUP Base Memory PC 640KB MS-DOS Extended Memory Module Total Memory Base Other Memory - 33 -
2-2 Advanced Features ( ) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Advanced Features Hard Disk Boot Priority [Press Enter] First Boot Device [Floppy] Second Boot Device [Hard Disk] Third Boot Device [CDROM] Password Check [Setup] # CPU Hyper-Threading [Enabled] Limit CPUID Max. to 3 [Disabled] No-Execute Memory Protect ( ) [Enabled] CPU Enhanced Halt (C1E) ( ) [Enabled] CPU EIST Function ( ) [Enabled] Item Help Menu Level Select Hard Disk Boot Device Priority : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults " # " Intel Pentium 4 HT Hard Disk Boot Priority ( ) < > < > <+> <-> <ESC> First / Second / Third Boot Device ( / / ) Floppy LS120 Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD Legacy LAN Disabled LS120 ZIP USB USB-ZIP USB USB ( ) GA-8VM800M-775-34 -
Password Check ( ) System CMOS SETUP Setup CMOS SETUP ( ) SETUP <Enter> CPU Hyper-Threading ( CPU ) Enabled CPU ( ) Disabled Limit CPUID Max. to 3 Enabled ( NT4.0) Disabled ( ) No-Execute Memory Protect ( ) Enabled No-Execute Memory Protect Disabled ( ) CPU Enhanced Halt (C1E) ( ) Enabled CPU Enhanced Halt (C1E) Disabled ( ) CPU EIST Function ( ) Enabled CPU EIST ( ) Disabled ( ) - 35 -
2-3 Integrated Peripherals ( ) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals OnChip IDE Channel 0 [Enabled] Item Help OnChip IDE Channel 1 [Enabled] Menu Level OnChip Serial ATA [Enabled] SATA Mode [RAID] AC97 Audio [Auto] USB 1.1 Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Onboard H/W LAN [Enabled] OnBoard LAN Boot ROM [Disabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Serial Port 2 [2F8/IRQ3] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] x EPP Mode Select EPP1.7 : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults OnChip IDE Channel0 ( channel PCI IDE ) Enabled channel IDE ( ) Disabled OnChip IDE Channel1 ( channel PCI IDE ) Enabled channel IDE ( ) Disabled OnChip Serial ATA ( Serial ATA) Enabled VT8237R Plus Serial ATA ( ) Disabled VT8237R Plus Serial ATA SATA Mode ( SATA ) RAID SATA RAID ( ) IDE SATA IDE AC97 Audio (AC97 ) Auto AC97 ( ) Disabled AC97 USB 1.1 Controller Enabled USB 1.1 ( ) Disabled USB 2.0 Controller Enabled USB 2.0 ( ) Disabled USB Keyboard Support ( USB ) Enabled USB ( USB USB Enabled) Disabled USB ( ) GA-8VM800M-775-36 -
USB Mouse Support ( USB ) Enabled USB ( USB Device USB Enabled) Disabled USB ( ) Onboard H/W LAN ( ) Enabled ( ) Disabled OnBoard LAN Boot ROM ( ) Enabled Disabled ( ) Onboard Serial Port 1 ( 1) Auto 3F8/IRQ4 1 COM 1 3F8 /IRQ4 ( ) 2F8/IRQ3 1 COM 2 2F8 /IRQ3 3E8/IRQ4 1 COM 3 3E8 /IRQ4 2E8/IRQ3 1 COM 4 2E8 /IRQ3 Disabled 1 Onboard Serial Port 2 ( 2) Auto 3F8/IRQ4 2 COM 1 3F8 /IRQ4 2F8/IRQ3 2 COM 2 2F8 /IRQ3 ( ) 3E8/IRQ4 2 COM 3 3E8 /IRQ4 2E8/IRQ3 2 COM 4 2E8 /IRQ3 Disabled 2 Onboard Parallel port ( ) 378/IRQ7 378/IRQ7 ( ) 278/IRQ5 278/IRQ5 3BC/IRQ7 3BC/IRQ7 Disabled Parallel Port Mode ( ) SPP ( ) EPP EPP (Enhanced Parallel Port) ECP ECP (Extended Capabilities Port) ECP+EPP EPP ECP EPP Mode Select EPP1.7 EPP Mode EPP1.7 ( ) EPP1.9 EPP Mode EPP1.9-37 -
2-4 Power Management Setup ( ) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Power Management Setup ACPI Suspend Type [S1(POS)] x USB Device Wake-Up From S3 Disabled Soft-Off by PWRBTN [Instant-Off] AC Back Function [Soft-Off] Keyboard Power On [Disabled] Mouse Power On [Disabled] PME Event Wake Up [Enabled] Modem Ring Resume [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (hh:mm:ss) Alarm 0 : 0 : 0 Item Help Menu Level [S1] Set suspend type to Power On Suspend under ACPI OS [S3] Set suspend type to Suspend to RAM under ACPI OS : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Suspend Type ( ) S1(POS) ACPI S1/POS (Power On Suspend) ( ) S3(STR) ACPI S3/STR (Suspend To RAM) USB Device Wake-up From S3 ( ACPI Suspend Type S3(STR)) Enabled S3 USB Disabled ( ) Soft-Off by PWRBTN ( ) Instant-Off ( ) Delay 4 Sec. 4 AC BACK Function ( ) Soft-Off ( ) Full-On Memory Keyboard Power On ( ) Disabled ( ) Password 1-8 Keyboard 98 Windows 98 Mouse Power On ( ) Disabled ( ) Enabled PS/2 GA-8VM800M-775-38 -
PME Event Wake Up ( ) +5VSB 1 Disabled Enabled ( ) Modem Ring Resume ( ) Disabled Enabled ( ) Resume by Alarm ( ) Enabled Disabled ( ) Enabled Date of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) - 39 -
2-5 PnP/PCI Configurations ( PCI ) PCI 1 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment CMOS Setup Utility-Copyright (C) 1984-2005 Award Software PnP/PCI Configurations [Auto] Item Help [Auto] Menu Level [Auto] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults PCI 1 IRQ Assignment ( PCI 1 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 1 IRQ 3,4,5,7,9,10,11,12,14,15 PCI 2 IRQ Assignment ( PCI 2 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 2 IRQ 3,4,5,7,9,10,11,12,14,15 PCI 3 IRQ Assignment ( PCI 3 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 3 IRQ 3,4,5,7,9,10,11,12,14,15 GA-8VM800M-775-40 -
2-6 PC Health Status ( ) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software PC Health Status Reset Case Open Status [Disabled] Item Help Case Opened No Menu Level VCORE OK DDR25V OK +3.3V OK +12V OK System Temperature 29 o C/84 o F CPU Temperature 30 o C/86 o F Current System FAN Speed 0 RPM Current CPU FAN Speed 3245 RPM System Warning Temp. [Disabled] CPU Warning Temp. [Disabled] System FAN Fail Warning [Disabled] CPU FAN Fail Warning [Disabled] CPU Smart FAN Control [Enabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Reset Case Open Status ( ) Disabled ( ) Enabled Case Opened "Case Opened" "No" "Case Opened" "Yes" "Case Opened" "Reset Case Open Status" "Enable" Current Voltage(V) VCORE / DDR25V / +3.3V / +12V ( ) System / CPU Temperature ( / CPU ) / CPU Current System / CPU FAN Speed (RPM) ( ) / CPU System Warning Temp. ( ) Disabled ( ) 60 o C / 140 o F 60 o C / 140 o F 70 o C / 158 o F 70 o C / 158 o F 80 o C / 176 o F 80 o C / 176 o F 90 o C / 194 o F 90 o C / 194 o F CPU Warning Temperature (CPU ) Disabled CPU ( ) 60 o C / 140 o F CPU 60 o C / 140 o F 70 o C / 158 o F CPU 70 o C / 158 o F 80 o C / 176 o F CPU 80 o C / 176 o F 90 o C / 194 o F CPU 90 o C / 194 o F - 41 -
System/CPU FAN Fail Warning ( /CPU ) Enabled Disabled ( ) CPU Smart FAN Control (CPU ) Disabled Enabled CPU CPU Easy Tune ( ) 2-7 Frequency / Voltage Control ( / ) CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Frequency/Voltage Control CPU Clock Ratio (Note) [15X] Item Help Auto Detect PCI/DIMM Clk [Enabled] Menu Level Spread Spectrum [Enabled] CPU Host Clock Control [Disabled] x CPU Clock 200MHz DRAM Clock By SPD AGP OverVoltage Control [Audo] DIMM OverVoltage Control [Auto] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ( ) CPU Clock Ratio ( ) CPU ( CPU ) Auto Detect PCI/DIMM Clk Enabled PCI/DIMM ( ) Disabled Spread Spectrum Enabled Spread Spectrum ( ) Disabled GA-8VM800M-775-42 -
CPU Host Clock Control 20 CMOS Disabled CPU Host Clock ( ) Enabled CPU Host Clock CPU Clock CPU CPU 200MHz ~ 255MHz CPU 200MHz 255MHz DRAM Clock (MHz) DDR266 "DRAM Clock(MHz)" 133 DDR333 "DRAM Clock(MHz)" 166 DDR400 "DRAM Clock(MHz)" 200 AGP OverVoltage Control (AGP ) AGP Auto AGP ( ) +0.1V AGP 0.1V +0.2V AGP 0.2V DIMM OverVoltage Control (DIMM ) DIMM Auto DIMM ( ) +0.1V DIMM +0.1V +0.2V DIMM +0.2V - 43 -
2-8 Load Fail-Safe Defaults ( Fail-Safe ) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Fail-Safe Defaults Save (Y/N)? & Exit N Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Load Fail-Safe Defaults <Y> <Enter> Fail- Safe Defaults Fail-Safe Defaults 2-9 Load Optimized Defaults ( Optimized ) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Optimized Defaults Save (Y/N)? & Exit N Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Load Optimized Defaults <Y> <Enter> CMOS GA-8VM800M-775-44 -
2-10 Set Supervisor/User Password ( / ) Standard CMOS Features Advanced Features Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Power Management Setup PnP/PCI Configurations Enter Password: PC Health Status Frequency/Voltage Control ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Change/Set/Disable Password Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving 8 Enter Enter PASSWORD DISABLED Supervisor Supervisor Advanced Features Password Check "Setup" CMOS SETUP Supervisor User User Advanced Features Password Check SYSTEM User Supervisor CMOS SETUP USER Password Supervisor CMOS SETUP - 45 -
2-11 Save & Exit Setup ( SETUP ) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Save to CMOS and EXIT Exit (Y/N)? Without Y Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Save Data to CMOS <Y> <Enter> RTC CMOS Setup Utility <N> <Esc> 2-12 Exit Without Saving ( SETUP ) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Quit Without Saving (Y/N)? Save & NExit Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Abandon all Data <Y> <Enter> Setup Utility <N> <Esc> GA-8VM800M-775-46 -
- 47 -
GA-8VM800M-775-48 -
Windows XP ( Setup.exe ) 3-1 Xpress Install Xpress Install Xpress Install 1. Windows XP USB2.0 Windows Service Pack \ \ "?" ( USB 2.0 ) 2. Nvidia Windows 2000/XP D:\ Chipset \ nvidia \ WinXP_2K \ Setup.exe ( D) - 49 -
3-2 3-3 GA-8VM800M-775-50 -
3-4 3-5 - 51 -
GA-8VM800M-775-52 -
4-1 ( ) U-PLUS D.P.S. (Universal Plus Dual Power System) U-Plus Dual Power System Intel LGA775 Pentium 4 CPU CPU 4 LED M.I.T. (Motherboard Intelligent Tweaker) M.I.T. M.I.T. C.I.A.2 M.I.B.2 M.I.T. C.I.A.2 (CPU Intelligent Accelerator 2) C.I.A.2 CPU C.I.A.2 CPU CPU M.I.B.2 (Memory Intelligent Booster 2) M.I.B.2 10% S.O.S. (System Overclock Saver) S.O.S. S.O.S. CMOS Download Center Download Center Download Center C.O.M. (Corporate Online Management) C.O.M. MIS MIS C.O.M. ( CPU ) ( @ ) - 53 -
4-1-1 EasyTune 5 EasyTune5 4) ( ) Microsoft Windows 1) 2) C.I.A. M.I.B. 3) / 1. Overclocking 2. C.I.A./C.I.A.2 and M.I.B./M.I.B.2 C.I.A./2 M.I.B./2 3. Smart-Fan 4. PC Health 5. GO 6. "Easy Mode" "Advance Mode" 7. CPU 8. LEDs 9. GIGABYTE Logo 10. Help EasyTune TM 5 11. EasyTune TM 5 ( ) EasyTune 5 GA-8VM800M-775-54 -
4-1-2 Xpress Recovery Xpress Recovery? 1. FAT16 FAT32 NTFS 2. IDE1 Master 3. 4. HPA IDE 5. (Partition) (Partition) 6. Ghost NTFS Xpress Recovery Xpress Recovery 1. CD-ROM ( : ) "Advanced Feature" CD-ROM "Boot from CD:" Xpress Rcovery CD-ROM Xpress Recovery F9.. Verifying DMI Pool Data Boot from CD: Boot from CD: Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO., Ltd. 1. Execute Backup Utility 2. Execute Restore Utility 3. Remove Backup Image 4. Set Password 5. Exit and Restart Build 2011-55 -
2. (POST) F9 ( : ) Award Modular v6.00pg, An Energy Star Ally Copyright (C) 1984-2004, Award Software, Inc. Intel 865PE AGPSet for 8IPE1000MT F1 Check System Health OK... Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery 08/16/2002-I845GE-6A69YG01C-00 F9 For Xpress Recovery Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO., Ltd. 1. Execute Backup Utility 2. Execute Restore Utility 3. Remove Backup Image 4. Set Password 5. Exit and Restart 1. CD-ROM Xpress Recovery F9 2. 3. Xpress Recovery GA-8VM800M-775-56 -
1.Execute Backup Utility: Press B to Backup your System or Esc to Exit " (POST) F9" " CD-ROM " 2.Execute Restore Utility: This program will recover your system to factory default. Press R to restore your system back to factory default or press Esc to exit 3.Remove Backup Image: Remove backup image. Are you sure? (Y/N) 4.Set Password: Please input a 4-16 character long password (a-z or 0-9) or press Esc to exit Xpress Recovery Xpress Recovery Set Password New Password Confirm Password Enter 5. Exit and Restart: - 57 -
4-1-3 Q-Flash TM Q-Flash TM Q-FlashTM DOS Windows Q-Flash TM Q-Flash TM Q-Flash TM Q-Flash TM 1. 2. (.Fxx 8KNXPU.Fba) 3. Del Q-Flash TM F1 F12 F1 F4 F4 F8 Q-Flash TM Q-Flash Dual Q-Flash Ultra Q-Flash Fa3 Fba GA-8KNXP Fa3 Award Modular v6.00pg, An Energy Star Ally Copyright (C) 1984-2003, Award Software, Inc. Intel i875p AGPset for 8KNXP Ultra Fa3 Check System Health OK, VCore = 1.5250 Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : 131072K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED-03-08 Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Dual / Q-Flash / F9 For Xpress Recovery 08/07/2003-i875P-6A79BG03C-00 GA-8VM800M-775-58 -
Q-Flash TM 1 Del Q-Flash Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Select Language Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... 2 F8 Y Dual /Q-Flash Dual /Q-Flash Dual /Q-Flash Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Q-Flash Wide Range Protection Disable Boot From Main Bios Auto Recovery Enable Halt On Error Disable Copy Main ROM Data to Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Q-Flash ROM Enter Q-Flash Enter Dual /Q-Flash - 59 -
Q-Flash Q-Flash " " 1. "Load Main from Floppy" Enter to Floppy" "Save Main 2. Enter 8KNXPU.Fba Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Wide Range Protection Disable Boot From 1 file(s) Main foundbios 8KNXPU.Fba 512K Auto Recovery Enable Halt On Error Disable Total size Copy : 1.39M Main ROM Data Free to Backup size : 911.50K F5 : Refresh Load Default Settings DEL : Delete Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Enter Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Wide Range Protection Disable Boot From Main Bios Reading file from floppy... Auto Recovery Enable >>>>>>>>>>>>>>... Halt On Error Disable Copy Main ROM Data to Backup Don't Turn Off Power or Reset System Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off " " GA-8VM800M-775-60 -
3. Y 4. Q-Flash Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K 5. Esc Y Q-Flash Wide Range Protection Disable Boot From Main Bios!! Auto Copy Recovery completed Enable - Pass!! Halt On Error Disable Copy Please Main press ROM any Data key to continue Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off (Backup ) 1 ~ 4 Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Wide Range Protection Disable Boot From Main Bios Auto Are Recovery you sure Enable to RESET? Halt On Error Disable [Enter] Copy to Main continure ROM Data or [Esc] to Backup to abort... Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Award Modular v6.00pg, An Energy Star Ally Copyright (C) 1984-2003, Award Software, Inc. Fba Intel i875p AGPset for 8KNXP Ultra Fba Check System Health OK, VCore = 1.5250 Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : 131072K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED-03-08 Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Dual / Q-Flash / F9 For Xpress Recovery 09/23/2003-i875P-6A79BG03C-00-61 -
6. Del Load Fail-Safe Defaults Enter Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Select Language Load Fail-Safe Defaults Load Optimized Defaults Load Fail-Safe Defaults (Y/N)? Set Supervisor Y Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... 7. Save & Exit Setup CMOS Y CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Select Language Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Save to CMOS and EXIT (Y/N)? Set Supervisor Y Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... Y Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Q-Flash TM Q-Flash MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit F3: Change Language F8: Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... GA-8VM800M-775-62 -
Q-Flash Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Q-Flash Q-Flash Keep DMI Data Enable Update from Floppy Save to Floppy Enter : Run :Move ESC:Reset F10:Power Off Q-Flash Enter Q-Flash Q-Flash Q-Flash " " 1. "Update from Floppy" Enter Floppy" 8GE800.F4 "Save to 2. Enter Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K 1 file(s) found 8GE800.F4Keep DMI Data Enable 256K Update from Floppy Total size : 1.39M Save to Free Floppy size : 1.14M Enter F5 : Run : Refresh :Move ESC:Reset DEL : Delete F10:Power Off Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Reading Keep file DMI from Data floppy Enable... >>>>>>>>>>>>>>... Update from Floppy Save to Floppy Enter Don't : Run Turn Off :Move Power or Reset ESC:Reset System F10:Power Off " " - 63 -
3. Y Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Keep DMI Updating Data Enable Now >>>>>>>>>>>>>>>>>>>... Update from Floppy Save to Floppy Enter Don't : Run Turn Off :Move Power or Reset ESC:Reset System F10:Power Off 4. Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Keep DMI Data Enable!! Copy Update completed from Floppy - Pass!! Save to Floppy Enter : Run Please press any key to continue :Move ESC:Reset F10:Power Off 5. Esc Y Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Keep DMI Data Enable Are Update you sure to from RESET Floppy? Save to Floppy [Enter] to continure or [Esc] to abort... Enter : Run :Move ESC:Reset F10:Power Off F4 Award Modular v6.00pg, An Energy Star Ally Copyright (C) 1984-2003, Award Software, Inc. Intel 845GE AGPSet for 8GE800 F4 Check System Health OK Main Processor : Intel Pentium(R) 4 1.7GHz (100x17.0) <CPUID : 0F0A Patch ID : 0009> Memory Testing : 122880K OK + 8192K Shared Memory Primary Master : FUJITSU MPE3170AT ED-03-08 Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Q-Flash 03/18/2003-I845GE-6A69YG01C-00 6. Del Load Fail-Safe Defaults Enter 6 7 GA-8VM800M-775-64 -
@ TM DOS @ @ @ 1. @ 2. @ / /GIGABYTE/@ @ 3. @ 4. @ "" "Update New " 1. I. Internet a. "Internet Update" b. "Update New " c. @ d. e. II. Internet a. "Internet Update" b. "Update New " c. " "All Files (*.*)" d. ( 8VM800M-775.E12) e. - 65 -
III. "Save Current " IV. Flash ROM "About this program" Flash ROM @ 2. I. I ( ) II. II III. I @ IV. II V. C.O.M.(Corporate Online Management) GA-8VM800M-775-66 -
4-1-4 Serial ATA RAID / Mirroring ( ) VIA VT8237R Striping (RAID 0) Mirroring (RAID 1) JBOD (Spanning) RAID 0 (Striping) Striping - 4KB 64KB RAID 1 (Mirroring) ( ) RAID 1 Mirroring Mirroring Mirroring 2GB 1GB 1GB JBOD (Spanning) Spanning ( JBOD - Just a Bunch of Drives) Spanning - 67 -
(RAID) 1) ( ) IDE SCSI SATA ( ) 2) RAID ( Integrated Peripherals ) 3) RAID RAID ( VT8237R RAID Tab Silicon Image Ctrl + S ) 4) 5) RAID 3 4 ( http:\\www. gigabyte.com.tw ) VT8237(VT8237R) SATA RAID SATA RAID / VT8237(VT8237R) SATA RAID POST (Power-On Self Test ) <Tab> VT8237(VT8237R) SATA RAID VIA Technologies, Inc. VIA VT8237 Serial ATA RAID Setting Utility V2.31 Copyright (C) VIA Technologies, Inc. All Right reserved. Scan Devices, Please wait... Press <Tab> key into User Window! Serial_Ch0 Master : ST3120026AS Serial_Ch1 Master : ST3120026AS <Tab> RAID - VT8237 SATA RAID <> <> VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST3120026AS SATA 111.79 Hdd Serial_Ch1 Master ST3120026AS SATA 111.79 Hdd GA-8VM800M-775-68 -
A. (Create Array) Create Array <Enter> VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Performance Array Mode RAID 0 (Striping) Select Disk Drives Block Size 64K Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST3120026AS SATA 111.79 Hdd Serial_Ch1 Master ST3120026AS SATA 111.79 Hdd data protection RAID SPAN for capacity Array Mode <Enter> RAID 0 for performance RADI 1 for VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Data Security Array RAID Mode 0 for RAID performance 0 (Striping) Select RAID Disk 1 for Drives data protection Block RAID Size SPAN 64Kfor capacity Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST3120026AS SATA 111.79 Hdd Serial_Ch1 Master ST3120026AS SATA 111.79 Hdd - 69 -
(Auto Setup) Auto Setup RAID 1 Create and duplicate (Select Disk Drives) Select Disk Drives Select Disk Drives <Enter> * VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Performance Array Mode RAID 0 (Striping) Select Disk Drives Block Size 64K Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST3120026AS SATA 111.79 Stripe0 [*]Serial_Ch1 Master ST3120026AS SATA 111.79 Stripe1 RAID 0 Block size ( ) Block Size <Enter> 4K 64K VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Performance Array Mode RAID 0 (Striping) 4K Select Disk Drives 8K Block Size 64K 16K Start Create Process 32K 64K Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST3120026AS SATA 111.79 Stripe0 [*]Serial_Ch1 Master ST3120026AS SATA 111.79 Stripe1 Start Create Process <Enter> [ The data on the selected disks will be destroied. Continue? (Y/N) ] <Y> RAID <N> RAID GA-8VM800M-775-70 -
B. (Delete Array) <Y> <N> Delete Array <Enter> VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View The selected array will be destoried. Are you sure? Continue? Press Y/N Delete a RAID array contain the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST3120026AS ARRAY 0 SATA 111.79 Stripe0 [*]Serial_Ch1 Master ST3120026AS ARRAY 0 SATA 111.79 Stripe1 RAID 1 RAID 1 C. (Select Boot Array) Array <Enter> <Enter> ESC <Enter> * Select Boot VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View Set/Clear bootable array F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST3120026AS ARRAY 0 SATA 111.79 Boot [*]Serial_Ch1 Master ST3120026AS ARRAY 0 SATA 111.79 Boot - 71 -
D. (Serial Number View) Serial Number View <Enter> VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View View the serial number of hard disk, it is useful for identify same model disks F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST3120026AS ARRAY 0 SATA 111.79 Stripe0 Serial_Ch1 Master ST3120026AS ARRAY 0 SATA 111.79 Stripe1 Serial Number: 3JT354CP E. <F1> VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Array Name Array Mode Block Size(GB) Size(GB) ARRAY 0 Stripe 64K 223.58 GA-8VM800M-775-72 -
SATA RAID SATA SATA MS-DOS ( ) 1 MS-DOS D:\> D:\> ENTER ( 1) cd bootdrv menu ( ) 2 2 1 2 3 Microsoft Windows RAID Windows 2000/Windows XP SATA Press F6 if you need to install a 3rd party SCSI or RAID driver F6 ( ) ( ) BootDrv MENU.exe MS-DOS 2 ( ) 64 F) 8237-XP64-73 -
4-1-5 / / 1. 2. Sound Effect 3. (2 ) " " GA-8VM800M-775-74 -
1. 2. Sound Effect 3. (4 ) Only SURROUND-KIT " " ( ) " " - 75 -
/ ( 1) / 1. / 2. Sound Effect 3. 5.1 (6 ) Only SURROUND-KIT "OK" ( 1) GA-8VM800M-775-76 -
( Audio Combo Kit, ) (Audio Combo Kit, SPDIF output : SOURROUND-Kit: / ) ( 6 ) 6 ( OK ) Audio Combo Kit 1. Audio Combo Kit 2. SURROUND-KIT SUR_CEN 3. SURROUND-KIT / SURROUND-KIT REAR R/L SUB CENTER - 77 -
4. Sound Effect 5. 5.1 (6 ) Only SURROUND-KIT " " : ( ) " " GA-8VM800M-775-78 -
SPDIF SPDIF SPDIF SPDIF 1. SPDIF 2. SPDIF SPDIF_IO 3. SPDIF SPDIF SPDIF - 79 -
4-2 " " + F1" "Del" "Ctrl / / CMOS CMOS Clear CMOS CMOS CMOS ( ) CMOS ( ) Defaults) Del "Load Fail-Safe Defaults"( Load Optimized Award AMI AMI : * 1 2 ECC 3 64k 4 5 CPU 6 Gate A20 7 CPU 8 9 ROM 10 CMOS 11 AWARD : 1 2 CMOS 1 1 1 2 1 3 1 9 GA-8VM800M-775-80 -
- 81 -
GA-8VM800M-775-82 -
- 83 -
GA-8VM800M-775-84 -
- 85 -
1. 2. 3. 2000 52 ( ) 1 2001 1 ( ) 2 2003 1 ( ) 3 "SN" 010471933180703021SN0412030006 SN0140002546 4. "SN" 5. a. b. c. d. e. f. ~ 11:00~21:00 11:00~18:00( ) - 14 (02)2358-7250 - 11-1 (02)2515-9698 ~ 8:30 ~ 17:30 ( ) (02)8227-6136 136 6 ~ 9:00 ~ 12:00 13: 00 ~ 17:00( ) 215 (03)439-6333 ext.1913 (03)403-0165 ~ 11:00~21:00 11:00~18:00( ) 278 (03)572-5747 ~ 11:00~21:00 11:00~18:00( ) 81 (04)2301-5511 ~ 11:00~21:00 11:00~18:00( ) 145 (06)221-7374 ~ 11:00~21:00 11:00~18:00( ) 51-1 (07)235-4340 http://service.gigabyte.com.tw GA-8VM800M-775-86 -
( +886 (2) 8912-4888 +886 (2) 8912-4003 : 0800-079-666 02-8665-2665 6 ~ 09:30~ 08:30 09:00~ 06:00 ) http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp ( ): http://www.gigabyte.com.tw ( ): http://chinese.giga-byte.com G.B.T. INC. + 1-626-854-9338 + 1-626-854-9339 http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp http://www.giga-byte.com G.B.T. Technology Trading GmbH +49-40-2533040 (Sales) +49-1803-428468 (Tech.) +49-40-25492343 (Sales) +49-1803-428329 (Tech.) NIPPON GIGA-BYTE CORPORATION http://www.gigabyte.co.jp GIGA-BYTE SINGAPORE PTE. LTD. http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp G.B.T. TECH. CO., LTD. http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp http://uk.giga-byte.com GIGA-BYTE TECHNOLOGY B.V. +31-40-290-2088 NL Tech.Support 0900-GIGABYTE (0900-44422983) BE Tech.Support 0900-84034 +31-40-290-2089 http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp http://www.giga-byte.nl http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp http://www.gigabyte.de - 87 -
http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp http://www.gigabyte.com.cn +86-21-63410999 +86-21-63410100 Moscow Representative Office Of GIGA-BYTE Technology Co., Ltd. http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.gigabyte.ru Office of GIGA-BYTE TECHNOLOGY Co., Ltd. in POLAND +86-10-62102838 +86-10-62102848 +86-27-87851061 +86-27-87851330 +86-20-87586074 +86-20-85517843 +86-28-85236930 +86-28-85256822 +86-29-85531943 +86-29-85539821 +86-24-23960918 +86-24-23960918-809 GIGABYTE TECHNOLOGY PTY. LTD. http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.giga-byte.com.au GIGABYTE TECHNOLOGY FRANCE S.A.R.L. http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.gigabyte.fr http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.gigabyte.pl Representative Office Of GIGA-BYTE Technology Co., Ltd. SERBIA & MONTENEGRO http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.gigabyte.co.yu Representative Office Of GIGA-BYTE Technology Co., Ltd. CZECH REPUBLIC http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.gigabyte.cz Representative Office Of GIGA-BYTE Technology Co., Ltd. Romania http://tw.giga-byte.com/techsupport/servicecenter.htm ( / ) http://ggts.gigabyte.com.tw/nontech.asp : http://www.gigabyte.com.ro GA-8VM800M-775-88 -