GA-8VM800PMD-775-RH Intel Pentium 4 LGA775

Transkript

1 GA-8VM800PMD-775-RH Intel Pentium 4 LGA775 Rev MC-VM800PMTR-1001R * WEEE logo * WEEE

2 Motherboard GA-8VM800PMD-775-RH Jul. 7, 2006 Motherboard GA-8VM800PMD-775-RH Jul. 7, 2006

4 GA-8VM800PMD-775-RH ( F4a) Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) Power Management Setup ( ) PnP/PCI Configurations ( PCI ) PC Health Status ( ) Frequency / Voltage Control ( / ) Load Fail-Safe Defaults ( Fail-Safe ) Load Optimized Defaults ( Optimized ) Set Supervisor/User Password ( / ) Save & Exit Setup ( SETUP ) Exit Without Saving ( SETUP )

5 EasyTune Xpress Recovery Serial ATA / /

6 IDE 1 1 SATA 1 I/O * 2 USB2.0 ( 12CR1-1UB030-51/R) ( 12CF1-1CM001-31/R) - 6 -

7 - 7 - GA-8VM800PMD-775-RH KB_MS COMA LPT LGA775 CPU_FAN ATX FDD VGA COMB ATX_12V CI PWR_LED PCI3 F_USB1 F_PANEL VIA VT8237R+ F_USB2 BATTERY PCI2 CODEC SUR_CEN CLR_CMOS CD_IN SATA1 SATA0 SYS _FAN PCI1 Winbond W83627 GA-8VM800PMD-775-RH F_AUDIO USB IDE2 IDE1 AGP DDRII_1 VIA P4M800 Pro LAN AUDIO USB DDRII_2 RTL 8100C AUX_IN SPDIF_IO

8 LGA 775 Processor CPUCLK+/- (133/200MHz) AGP 4X/8X VGA Port System Bus 533/800MHz 400/533MHz AGP CLK (66MHz) VIA P4M800 Pro DDR II 3 PCI RJ45 RTL8100C 66MHz V_Link AC97 Link VIA VT8237R+ LPC BUS Winbond W Serial ATA Floppy LPT Port PS/2 KB/Mouse PCI CLK (33MHz) 6 Channel CODEC MIC LINE-IN LINE-OUT 8 USB Ports ATA33/66/ 100/133 IDE Channels COMA/COMB - 8 -

9 (CPU RAM)

10 1-2 Intel Pentium 4 LGA775 L2 CPU 800/533MHz FSB VIA P4M800 Pro VIA 8237R+ Realtek RTL8100C (10/100 Mbit) Realtek ALC655 2/4/6 SPDIF / CD In / AUX In Jack Sensing (Connector Sensing) VT8237R IDE (IDE1, IDE2) UDMA 33/ATA 66/ATA 100/ATA IDE - 2 SATA (SATA0, SATA1) 2 SATA - SATA striping (RAID 0) mirroring (RAID 1) Microsoft Windows 2000/XP 2 DDR II DIMM 2 GB ( ) DDR II 533/400 DIMM 1.8V DDRDIMM 1 AGP 3 PCI 1 20-pin ATX 1 4-pin ATX 12V 1 2 IDE 2 SATA 1 CPU (CD In) 1 (AUX In) 1 (COMB) 2 USB 2.0/1.1 4 USB 2.0/ SPDIF / 1 GA-8VM800PMD-775-RH

11 1 PS/2 1 PS/2 1 1 (COMA) 1 4 USB 2.0/1.1 1 RJ-45 3 ( / / ) I/O Winbond W83627 CPU / CPU / CPU / CPU ( ) 1 4 Mbit flash ROM Download Center Q-Flash EasyTune( ) ( ) Xpress Install Xpress Recovery2 Xpress Rescue Norton Internet Security (OEM ) Micro ATX 24.4 x 23.3 ( ) 1 GB ( 512 Mbit) ( ) 4-pin CPU ( ) EasyTune

12 (CPU) HT Technology) HT Intel Pentium 4 HT HT HT (Hyper-Threading ( ) ( ) GA-8VM800PMD-775-RH

13 ( ) ( Intel ) ( ) CPU

14 DDR II DDRII GA-8VM800PMD-775-RH

15 ( ) AGP / AGP

16 1-6 PS/2 ( ) PS/2 PS/2 ( ) A (USB) USB USB / USB USB USB USB Fast Ethernet 10/100Mbps ( ) GA-8VM800PMD-775-RH

17 ) ATX_12V 2) ATX (Power Connector) 3) CPU_FAN 4) SYS_FAN 5) FDD 6) IDE1 / IDE2 7) SATA0 / SATA1 8) F_PANEL 9) PWR_LED 10) F_AUDIO 11) CD_IN 12) AUX_IN 13) SPDIF_IO 14) SUR_CEN 15) F_USB1 / F_USB2 16) COMB 17) CI 18) CLR_CMOS 19) BATTERY

18 1/2) ATX_12V/ATX ( ) ATX_12V CPU ATX_12V! ) ( V 4 +12V V 2 3.3V V V 7 8 Power Good 9 5V SB (stand by +5V) V V 12-12V PS_ON(soft on/off) V 19 +5V 20 +5V GA-8VM800PMD-775-RH

19 3/4) CPU_FAN / SYS_FAN ( ) +12V 3-pin/4-pin( CPU_FAN ) +12V (GND) CPU/ CPU CPU/ CPU_FAN : 1 CPU_FAN V / 3 4 SYS_FAN : SYS_FAN V 3 5) FDD ( ) 360KB 720KB 1.2MB 1.44MB 2.88MB

20 6) IDE1 / IDE2 (IDE ) IDE IDE IDE IDE IDE ( ) IDE Master Slave ( IDE ) IDE IDE IDE 7) SATA0 / SATA1 (Serial ATA ) Serial ATA 150MB Serial ATA 1 SATA TXP 3 TXN 1 SATA RXN 6 RXP 7 GA-8VM800PMD-775-RH

21 8) F_PANEL ( ) Message LED/ Power/ Sleep LED Speaker Connector Power Switch HD- RES+ HD+ RES- NC MSG- MSG+ SPEAK- PW- PW+ SPEAK+ Reset Switch IDE Hard Disk Active LED MSG (Message LED/Power/Sleep LED) Pin 1: LED anode(+) Pin 2: LED cathode(-) PW (Power Switch) Open: Normal : Close: Power On/Off : / SPEAK (Speaker Connector) Pin 1: Pin 2- Pin 3: Pin 4: Data(-) HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(-) RES (Reset Switch) Open: Normal Close: Reset Hardware System NC

22 9) PWR_LED PWR_LED ON OFF Power LED Suspend 1 1 MPD+ 2 MPD- 3 MPD- 10) F_AUDIO ( ) Pin5-6 Pin9-10 Jumper MIC 2 3 MIC_BIAS 4 5 Front Audio(R) 6 Rear Audio (R)/ Return R Front Audio (L) 10 Rear Audio (L)/ Return L GA-8VM800PMD-775-RH

23 11) CD_IN ( ) CD-ROM DVD-ROM CD ) AUX_IN ( ) MPEG

24 13) SPDIF_IO (SPDIF / ) Sony/Philip Digital Interface Format / SPDIF IN SPDIF OUT SPDIF IN (SPDIF Out) SPDIF AC-3 AC-3 (SPDIF In) SPDIF SPDIF SPDIF 4 SPDIFI ) SUR_CEN ( ) SUR_CEN SUR OUTL 2 SUR OUTR CENTER_OUT 6 BASS_OUT GA-8VM800PMD-775-RH

25 15) F_USB1 / F_USB2 ( ) USB USB (5V) 2 (5V) 3 USB0 DX- 4 USB1 Dy- 5 USB0 DX+ 6 USB1 Dy ) COMB ( B ) NDCD B- 2 NSIN B 3 NSOUT B 4 NDTR B- 5 6 NDSR B- 7 NRTS B- 8 NCTS B- 9 NRI B

26 17) CI ( ) ) CLR_CMOS ( CMOS CMOS CMOS CMOS GA-8VM800PMD-775-RH

27 19) BATTERY ( ) ( CMOS... )

28 GA-8VM800PMD-775-RH

29 (Basic Input and Output System) CMOS SETUP CMOS SETUP CMOS SRAM CMOS SRAM POST (Power-On Self Test ) <Del> CMOS SETUP "Ctrl + F1" Q-Flash TM Q-Flash TM < > <Enter> <Esc> SETUP <Page Up> <Page Down> <F1> <F2> <F5> ( ) <F6> Fail-Safe ( ) <F7> Optimized ( ) <F8> Q-Flash <F9> <F10> CMOS SETUP SETUP SETUP <F1> CMOS SETUP <Esc>

30 CMOS SETUP ( F4a) <Enter> CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... "Load Optimized Defaults" Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) IDE SATA USB IEEE1394 COM port LPT port AC97 Power Management Setup ( ) CPU PnP/PCI Configuration ( PCI ) ISA PnP PCI PC Health Status ( ) Frequency / Voltage Control ( / ) CPU Load Fail-Safe Defaults ( Fail-Safe ) CMOS GA-8VM800PMD-775-RH

31 Load Optimized Defaults ( Optimized ) CMOS Set Supervisor Password ( ) SETUP CMOS Set User Password ( ) PC Save & Exit Setup ( ) SETUP <F10> Exit Without Saving ( SETUP ) <ESC>

32 2-1 Standard CMOS Features ( CMOS ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Date (mm:dd:yy) Wed, Jun Time (hh:mm:ss) 10:40:9 IDE Channel 0 Master [None] IDE Channel 0 Slave [None] IDE Channel 1 Master [None] IDE Channel 1 Slave [None] IDE Channel 2 Master [None] IDE Channel 3 Master [None] Drive A [1.44M, 3.5"] Floppy 3 Mode Support [Disabled] Halt On [All, But Keyboard] Item Help Menu Level Change the day, month, year <Week> Sun. to Sat. <Month> Jan. to Dec. <Day> 1 to 31 (or maximum allowed in the month) Base Memory Extended Memory 640K 447M <Year> 1999 to 2098 : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) ( ) / Time (hh:mm:ss) ( ) / / / 24 / / (mm) 1 12 (dd) 1 28/29/30/31 (yy) IDE Channel 0/1 Master, Slave ( / IDE/SATA ) IDE HDD Auto-Detection "Enter" IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave IDE Channel 0/1 / IDE/SATA None IDE/SATA None Auto POST IDE/SATA ( ) Manual Access Mode CHS/ LBA/ Large/ Auto ( Auto) IDE Channel 2/3 Master ( IDE/SATA ) IDE HDD Auto-Detection "Enter" Extended IDE Drive IDE Channel 2/3 IDE/SATA None IDE/SATA None Auto POST IDE/SATA ( ) GA-8VM800PMD-775-RH

33 Access Mode Large/ Auto ( Auto) Capacity Cylinder Head Precomp Landing Zone Sector Precompensation Drive A ( A: ) None None 360K, 5.25" KB 1.2M, 5.25" MB 720K, 3.5" 3 720KB 1.44M, 3.5" MB 2.88M, 3.5" MB Floppy 3 Mode Support ( 3 Mode ) Disabled 3 Mode Drive A A: 3 Mode Halt on ( ) POST No Errors All Errors All, But Keyboard ( ) All, But Diskette All, But Disk/Key Memory ( ) POST(Power On Self Test) STANDARD CMOS SETUP Base Memory PC 640KB MS-DOS Extended Memory Base Other Memory

34 2-2 Advanced Features ( ) CMOS Setup Utility-Copyright (C) Award Software Advanced Features Hard Disk Boot Priority [Press Enter] Item Help First Boot Device [Floppy] Menu Level Second Boot Device [Hard Disk] Third Boot Device [CDROM] Select Hard Disk Boot Password Check [Setup] Device Priority CPU Hyper-Threading ( ) [Enabled] Limit CPUID Max. to 3 ( ) [Disabled] No-Execute Memory Protect ( ) [Enabled] CPU Enhanced Halt (C1E) ( ) [Enabled] CPU Thermal Monitor 2(TM2) ( ) [Enabled] CPU EIST Function ( ) [Enabled] Virtualization Technology ( ) [Enabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Hard Disk Boot Priority ( ) < > < > <+> <-> <ESC> First / Second / Third Boot Device ( / / ) Floppy LS120 Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD Legacy LAN Disabled LS120 ZIP USB USB-ZIP USB USB ( ) GA-8VM800PMD-775-RH

35 Password Check ( ) System CMOS SETUP Setup CMOS SETUP ( ) SETUP <Enter> CPU Hyper-Threading ( CPU ) ( ) Enabled CPU ( ) Disabled Limit CPUID Max. to 3 ( ) Enabled ( NT4.0) Disabled ( ) No-Execute Memory Protect ( ) Enabled No-Execute Memory Protect ( ) Disabled CPU Enhanced Halt (C1E) ( ) Enabled CPU Enhanced Halt (C1E) ( ) Disabled CPU Thermal Monitor 2 (TM2) ( ) Enabled CPU Thermal Monitor(TM2) ( ) Disabled CPU EIST Function ( ) Enabled CPU EIST ( ) Disabled Virtualization Technology ( ) Enabled Virtualization Technology ( ) Disabled ( )

36 2-3 Integrated Peripherals ( ) CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals OnChip IDE Channel 0 [Enabled] Item Help OnChip IDE Channel 1 [Enabled] Menu Level OnChip Serial ATA [Enabled] SATA Mode [IDE] AC97 Audio [Auto] USB 1.1 Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Onboard H/W LAN [Enabled] OnBoard LAN Boot ROM [Disabled] Legacy USB storage detect [Enabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Serial Port 2 [2F8/IRQ3] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] x EPP Mode Select EPP1.7 : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults OnChip IDE Channel0 ( channel PCI IDE ) Enabled channel IDE ( ) Disabled OnChip IDE Channel1 ( channel PCI IDE ) Enabled channel IDE ( ) Disabled OnChip Serial ATA ( Serial ATA) Enabled VT8237R Plus Serial ATA ( ) Disabled VT8237R Plus Serial ATA SATA Mode ( SATA ) RAID SATA RAID IDE SATA IDE ( ) AC97 Audio (AC97 ) Auto AC97 ( ) Disabled AC97 USB 1.1 Controller Enabled USB 1.1 ( ) Disabled USB 2.0 Controller Enabled USB 2.0 ( ) Disabled USB Keyboard Support ( USB ) Enabled USB ( USB USB Enabled) Disabled USB ( ) GA-8VM800PMD-775-RH

37 USB Mouse Support ( USB ) Enabled USB ( USB Device USB Enabled) Disabled USB ( ) Onboard H/W LAN ( ) Enabled ( ) Disabled OnBoard LAN Boot ROM ( ) Enabled Disabled ( ) Legacy USB storage detect POST USB USB USB Enabled POST USB ( ) Disabled Onboard Serial Port 1 ( 1) Auto 3F8/IRQ4 1 COM 1 3F8 /IRQ4 ( ) 2F8/IRQ3 1 COM 2 2F8 /IRQ3 3E8/IRQ4 1 COM 3 3E8 /IRQ4 2E8/IRQ3 1 COM 4 2E8 /IRQ3 Disabled 1 Onboard Serial Port 2 ( 2) Auto 3F8/IRQ4 2 COM 1 3F8 /IRQ4 2F8/IRQ3 2 COM 2 2F8 /IRQ3 ( ) 3E8/IRQ4 2 COM 3 3E8 /IRQ4 2E8/IRQ3 2 COM 4 2E8 /IRQ3 Disabled 2 Onboard Parallel port ( ) 378/IRQ7 378/IRQ7 ( ) 278/IRQ5 278/IRQ5 3BC/IRQ7 3BC/IRQ7 Disabled Parallel Port Mode ( ) SPP ( ) EPP EPP (Enhanced Parallel Port) ECP ECP (Extended Capabilities Port) ECP+EPP EPP ECP EPP Mode Select EPP1.7 EPP Mode EPP1.7 ( ) EPP1.9 EPP Mode EPP

38 2-4 Power Management Setup ( ) CMOS Setup Utility-Copyright (C) Award Software Power Management Setup ACPI Suspend Type [S1(POS)] Item Help x USB Device Wake-Up From S3 Disabled Menu Level Soft-Off by PWRBTN [Instant-Off] AC BACK Function [Soft-Off] [S1] Keyboard Power On [Disabled] Set suspend type to Mouse Power On [Disabled] Power On Suspend under PME Event Wake Up [Enabled] ACPI OS Modem Ring Resume [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (hh:mm:ss) Alarm 0 : 0 : 0 [S3] Set suspend type to Suspend to RAM under ACPI OS : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Suspend Type ( ) S1(POS) ACPI S1/POS (Power On Suspend) ( ) S3(STR) ACPI S3/STR (Suspend To RAM) USB Device Wake-up From S3 ( ACPI Suspend Type S3(STR)) Enabled S3 USB Disabled ( ) Soft-Off by PWRBTN ( ) Instant-Off ( ) Delay 4 Sec. 4 AC BACK Function ( ) Soft-Off ( ) Full-On Memory Keyboard Power On ( ) Disabled ( ) Password 1-8 Keyboard 98 Windows 98 Mouse Power On ( ) Disabled ( ) Enabled PS/2 GA-8VM800PMD-775-RH

39 PME Event Wake Up ( ) +5VSB 1 Disabled Enabled ( ) Modem Ring Resume ( ) Disabled Enabled ( ) Resume by Alarm ( ) Enabled Disabled ( ) Enabled Date of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)

40 2-5 PnP/PCI Configurations ( PCI ) CMOS Setup Utility-Copyright (C) Award Software PnP/PCI Configurations PCI 1 IRQ Assignment [Auto] Item Help PCI 2 IRQ Assignment [Auto] Menu Level PCI 3 IRQ Assignment [Auto] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults PCI 1 IRQ Assignment ( PCI 1 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 1 IRQ 3,4,5,7,9,10,11,12,14,15 PCI 2 IRQ Assignment ( PCI 2 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 2 IRQ 3,4,5,7,9,10,11,12,14,15 PCI 3 IRQ Assignment ( PCI 3 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 3 IRQ 3,4,5,7,9,10,11,12,14,15 GA-8VM800PMD-775-RH

41 2-6 PC Health Status ( ) CMOS Setup Utility-Copyright (C) Award Software PC Health Status Reset Case Open Status [Disabled] Item Help Case Opened No Menu Level VCORE 1.344V DDR18V 1.808V +3.3V 3.280V +12V V System Temperature 29 o C/84 o F CPU Temperature 30 o C/86 o F Current SYS FAN Speed 0 RPM Current CPU FAN Speed 3245 RPM SYS FAN Fail Warning [Disabled] CPU FAN Fail Warning [Disabled] CPU Smart FAN Control ( ) [Enabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Reset Case Open Status ( ) Disabled ( ) Enabled Case Opened "Case Opened" "No" "Case Opened" "Yes" "Case Opened" "Reset Case Open Status" "Enable" Current Voltage(V) VCORE / DDR18V / +3.3V / +12V ( ) System / CPU Temperature ( / CPU ) / CPU Current SYS / CPU FAN Speed (RPM) ( / CPU ) / CPU SYS / CPU FAN Fail Warning ( /CPU ) Enabled /CPU Disabled /CPU ( ) CPU Smart FAN Control (CPU ) ( ) Disabled Enabled CPU CPU Easy Tune ( ) ( ) 4-pin CPU

42 2-7 Frequency / Voltage Control ( / ) CMOS Setup Utility-Copyright (C) Award Software Frequency/Voltage Control CPU Clock Ratio ( ) [22X] Item Help Auto Detect PCI Clk [Enabled] Menu Level Spread Spectrum [Enabled] DRAM Clock [By SPD] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CPU CPU Clock Ratio ( ) CPU ( CPU ) Auto Detect PCI Clk Enabled PCI ( ) Disabled Spread Spectrum Enabled Spread Spectrum ( ) Disabled DRAM Clock DDR II 400 "DRAM Clock" 200 DDR II 533 "DRAM Clock" 266 ( ) GA-8VM800PMD-775-RH

43 2-8 Load Fail-Safe Defaults ( Fail-Safe ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Load Fail-Safe Defaults Save (Y/N)? & NExit Setup PC Health Status Exit Without Saving Frequency/Voltage Control ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Load Fail-Safe Defaults <Y> <Enter> Fail- Safe Defaults Fail-Safe Defaults 2-9 Load Optimized Defaults ( Optimized ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Load Optimized Defaults Save (Y/N)? & Exit N Setup PC Health Status Exit Without Saving Frequency/Voltage Control ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Load Optimized Defaults <Y> <Enter> CMOS

44 2-10 Set Supervisor/User Password ( / ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Enter Password: Save & Exit Setup PC Health Status Exit Without Saving Frequency/Voltage Control ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Change/Set/Disable Password 8 Enter Enter PASSWORD DISABLED Supervisor Supervisor Advanced Features Password Check "Setup" CMOS SETUP Supervisor User User Advanced Features Password Check SYSTEM User Supervisor CMOS SETUP USER Password Supervisor CMOS SETUP GA-8VM800PMD-775-RH

45 2-11 Save & Exit Setup ( SETUP ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Save to CMOS and EXIT Save (Y/N)? & Exit Y Setup PC Health Status Exit Without Saving Frequency/Voltage Control ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Save Data to CMOS <Y> <Enter> RTC CMOS Setup Utility <N> <Esc> 2-12 Exit Without Saving ( SETUP ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Quit Without Saving (Y/N)? Save & NExit Setup PC Health Status Exit Without Saving Frequency/Voltage Control ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Abandon all Data <Y> <Enter> Setup Utility <N> <Esc>

47 Windows XP ( Setup.exe ) 3-1 Xpress Install Xpress Install Xpress Install 1. Windows XP USB2.0 Windows Service Pack \ \ "?" ( USB 2.0 ) 2. Nvidia Windows 2000/XP D:\ Chipset \ nvidia \ WinXP_2K \ Setup.exe ( D)

49

51 4-1 ( ) EasyTune 5 EasyTune5 Microsoft Windows 1) 2) C.I.A. M.I.B. 3) 4) ( ) / 1. Overclocking 2. C.I.A./C.I.A.2 and M.I.B./M.I.B.2 C.I.A./2 M.I.B./2 3. Smart-Fan 4. PC Health 5. GO 6. "Easy Mode" "Advance Mode" 7. CPU 8. LEDs 9. GIGABYTE Logo 10. Help EasyTune TM EasyTune TM 5 ( ) EasyTune

52 4-1-2 Xpress Recovery2 IDE Controller Xpress Recovery2 Xpress Recovery2 (BACKUP) (RESTORE) Microsoft WinXP/2K/NT/98/Me DOS NTFS FAT32 FAT16 PATA SATA Backup <F9> : 1. Intel x86 platform 2. 64M bytes memory 3. VESA supported VGA cards : CD-ROM <F9> "Advanced Feature" CD-ROM "Boot from CD/DVD:" Xpress Recovery2 CD-ROM Xpress Recovery2 <F9>.. Boot from CD/DVD: Press any key to startup XpressRecovery2... Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. 8VM800PMD-775-RH F4a.... <DEL>: Setup/Q-Flash, <F9>: Xpress Recovery2 05/29/2006-P4M800Pro-823-6A7L6G05C-00 Boot from CD/DVD: <F9> Xpress Recovery2 1. CD-ROM Xpress Recovery2 <F9> Xpress Recovery2 GA-8VM800PMD-775-RH

53 Xpress Recovery2 1. RESTORE: ( ) 2. BACKUP: 3. REMOVE: ( ) 4. REBOOT: : 1. Xpress Recovery 2. primary partition Xpress Recovery2 3. Xpress Recovery2 ( :4G Bytes; ) 4. Microsoft DOS WinXP/2000/NT/9x/ Me 5. USB 6. RAID/AHCI controller(class code:0104/0106) 7. : : a. PATA IDE primary channel b. PATA IDE secondary channel c. SATA IDE channel 1 d. SATA IDE channel 2 e. SATA IDE channel 3 f. SATA IDE channel 4 : 1. Win2000 ( 128G Bytes) "EnableBigLba.exe" GPL 4. nvidia RAID SATA IDE

54 4-1-3 Q-Flash TM Q-Flash TM Q-Flash TM DOS Windows Q-Flash TM Q-Flash TM Q-Flash TM Q-Flash TM (.Fxx 8KNXPU.Fba) 3. Del Q-Flash TM F1 F12 F1 F4 F4 F8 Q-Flash TM Q-Flash Dual Q-Flash Ultra Q-Flash Fa3 Fba GA-8KNXP Fa3 Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. Intel i875p AGPset for 8KNXP Ultra Fa3 Check System Health OK, VCore = Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Dual / Q-Flash / F9 For Xpress Recovery 08/07/2003-i875P-6A79BG03C-00 GA-8VM800PMD-775-RH

55 Q-Flash TM 1 Del Q-Flash CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Select Language Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... 2 F8 Y Dual /Q-Flash Dual /Q-Flash Dual /Q-Flash Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Q-Flash Wide Range Protection Disable Boot From Main Bios Auto Recovery Enable Halt On Error Disable Copy Main ROM Data to Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Q-Flash ROM Enter Q-Flash Enter Dual /Q-Flash

56 Q-Flash Q-Flash " " 1. "Load Main from Floppy" Enter to Floppy" "Save Main 2. Enter 8KNXPU.Fba Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Wide Range Protection Disable Boot From 1 file(s) Main foundbios 8KNXPU.Fba 512K Auto Recovery Enable Halt On Error Disable Total size Copy : 1.39M Main ROM Data Free to Backup size : K F5 : Refresh Load Default Settings DEL : Delete Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Enter Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Wide Range Protection Disable Boot From Main Bios Reading file from floppy... Auto Recovery Enable >>>>>>>>>>>>>>... Halt On Error Disable Copy Main ROM Data to Backup Don't Turn Off Power or Reset System Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off " " GA-8VM800PMD-775-RH

57 3. Y 4. Q-Flash Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K 5. Esc Y Q-Flash Wide Range Protection Disable Boot From Main Bios!! Auto Copy Recovery completed Enable - Pass!! Halt On Error Disable Copy Please Main press ROM any Data key to continue Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off (Backup ) 1 ~ 4 Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF003A Backup ROM Type/Size...SST 49LF003A 512K 512K Wide Range Protection Disable Boot From Main Bios Auto Are Recovery you sure Enable to RESET? Halt On Error Disable [Enter] Copy to Main continure ROM Data or [Esc] to Backup to abort... Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. Fba Intel i875p AGPset for 8KNXP Ultra Fba Check System Health OK, VCore = Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Dual / Q-Flash / F9 For Xpress Recovery 09/23/2003-i875P-6A79BG03C

58 6. Del Load Optimized Defaults Enter CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Select Language Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Load Fail-Safe Defaults (Y/N)? Set User Y Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Load Optimized Defaults Y 7. Save & Exit Setup CMOS CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Select Language Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Save to CMOS and EXIT (Y/N)? Set Supervisor Y Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Save Data to CMOS Y Q-Flash TM Q-Flash CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) Q-Flash Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving Time, Date, Hard Disk Type... GA-8VM800PMD-775-RH

59 Q-Flash Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Q-Flash Q-Flash Keep DMI Data Enable Update from Floppy Save to Floppy Enter : Run :Move ESC:Reset F10:Power Off Q-Flash Enter Q-Flash Q-Flash Q-Flash " " 1. "Update from Floppy" Enter Floppy" 8GE800.F4 "Save to 2. Enter Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K 1 file(s) found 8GE800.F4Keep DMI Data Enable 256K Update from Floppy Total size : 1.39M Save to Free Floppy size : 1.14M Enter F5 : Run : Refresh :Move ESC:Reset DEL : Delete F10:Power Off Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Reading Keep file DMI from Data floppy Enable... >>>>>>>>>>>>>>... Update from Floppy Save to Floppy Enter Don't : Run Turn Off :Move Power or Reset ESC:Reset System F10:Power Off " "

60 3. Y Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Keep DMI Updating Data Enable Now >>>>>>>>>>>>>>>>>>>... Update from Floppy Save to Floppy Enter Don't : Run Turn Off :Move Power or Reset ESC:Reset System F10:Power Off 4. Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Keep DMI Data Enable!! Copy Update completed from Floppy - Pass!! Save to Floppy Enter : Run Please :Move press any key ESC:Reset to continue F10:Power Off 5. Esc Y Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF003A 256K Keep DMI Data Enable Are Update you sure to from RESET Floppy? Save to Floppy [Enter] to continure or [Esc] to abort... Enter : Run :Move ESC:Reset F10:Power Off F4 Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. Intel 845GE AGPSet for 8GE800 F4 Check System Health OK Main Processor : Intel Pentium(R) 4 1.7GHz (100x17.0) <CPUID : 0F0A Patch ID : 0009> Memory Testing : K OK K Shared Memory Primary Master : FUJITSU MPE3170AT ED Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Q-Flash 03/18/2003-I845GE-6A69YG01C Del Load Fail-Safe Defaults Enter 6 7 GA-8VM800PMD-775-RH

61 @ @ / "" "Update New " 1. I. Internet a. "Internet Update" b. "Update New " d. e. II. Internet a. "Internet Update" b. "Update New " c. " "All Files (*.*)" d. ( VM800PMD.F4) e

62 III. "Save Current " IV. Flash ROM "About this program" Flash 2. I. I ( ) II. II III. IV. II V. C.O.M.(Corporate Online Management) GA-8VM800PMD-775-RH

63 4-1-4 Serial ATA SATA (1) SATA (2) SATA (3) RAID RAID ( ) (4) SATA (5) SATA (a) SATA ( SATA RAID ) (b) (c) Windows XP 2000 (d) (1) SATA SATA SATA SATA ( SATA SATA0_SB/SATA1_SB) ( ) RAID

64 (2) SATA SATA 1 POST (Power-On Self Test ) <Del> CMOS SETUP RAID Integrated Peripherals SATA Mode RAID( IDE) RAID IDE ( 1) CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals OnChip IDE Channel 0 [Enabled] Item Help OnChip IDE Channel 1 [Enabled] Menu Level OnChip Serial ATA [Enabled] SATA Mode [RAID] AC97 Audio [Auto] USB 1.1 Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Onboard H/W LAN [Enabled] OnBoard LAN Boot ROM [Disabled] Legacy USB storage detect [Enabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Serial Port 2 [2F8/IRQ3] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] x EPP Mode Select EPP1.7 : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 1 GA-8VM800PMD-775-RH

65 2 First Boot Device CDROM CD-ROM ( 2) CMOS Setup Utility-Copyright (C) Award Software Advanced Features Hard Disk Boot Priority [Press Enter] Item Help First Boot Device [CDROM] Menu Level Second Boot Device [Hard Disk] Third Boot Device [CDROM] Password Check [Setup] CPU Hyper-Threading [Enabled] Limit CPUID Max. to 3 [Disabled] No-Execute Memory Protect [Enabled] CPU Enhanced Halt (C1E) [Enabled] CPU Thermal Monitor 2(TM2) [Enabled] CPU EIST Function [Enabled] Virtualization Technology [Enabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

66 (3) RAID RAID SATA RAID SATA RAID RAID 1 POST (Power-On Self Test ) ( 3) <Tab> VT8237 SATA RAID VIA Technologies, Inc. VIA VT8237 Serial ATA RAID Setting Utility V2.31 Copyright (C) VIA Technologies, Inc. All Right reserved. Scan Devices, Please wait... Press <Tab> key into User Window! Serial_Ch0 Master : ST AS Serial_Ch1 Master : ST AS 3 2 <Tab> RAID - VT8237 SATA RAID ( 4) < > < > VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST AS SATA Hdd Serial_Ch1 Master ST AS SATA Hdd 4 GA-8VM800PMD-775-RH

67 A. (Create Array) Create Array <Enter> ( 5) VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Performance Array Mode RAID 0 (Striping) Select Disk Drives Block Size 64K Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST AS SATA Hdd Serial_Ch1 Master ST AS SATA Hdd 5 Array Mode <Enter> ( 6) RAID 0 for performance RADI 1 for data protection RAID SPAN for capacity VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Data Security Array RAID Mode 0 for RAID performance 0 (Striping) Select RAID Disk 1 for Drives data protection Block RAID Size SPAN 64K for capacity Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST AS SATA Hdd Serial_Ch1 Master ST AS SATA Hdd

68 RAID 1 (Auto Setup) Auto Setup Create and duplicate (Select Disk Drives) Select Disk Drives Select Disk Drives <Enter> * ( 7) VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Performance Array Mode RAID 0 (Striping) Select Disk Drives Block Size 64K Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST AS SATA Stripe0 [*]Serial_Ch1 Master ST AS SATA Stripe1 RAID 0 Block size ( ) Block Size <Enter> 4K 64K ( 8) 7 VIA Tech. VT8237 SATA RAID Ver 2.31 Auto Setup For Performance Array Mode RAID 0 (Striping) 4K Select Disk Drives 8K Block Size 64K 16K Start Create Process 32K 64K Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST AS SATA Stripe0 [*]Serial_Ch1 Master ST AS SATA Stripe1 8 Start Create Process <Enter> [ The data on the selected disks will be destroied. Continue? (Y/N) ] <Y> RAID <N> RAID GA-8VM800PMD-775-RH

69 B. (Delete Array) 9) Delete Array <Enter> <Y> <N> ( VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View The selected array will be destoried. Are you sure? Continue? Press Y/N Delete a RAID array contain the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST AS ARRAY 0 SATA Stripe0 [*]Serial_Ch1 Master ST AS ARRAY 0 SATA Stripe1 9 RAID 1 RAID 1 C. (Select Boot Array) Select Boot Array <Enter> <Enter> ESC <Enter> * ( 10) VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View Set/Clear bootable array F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status [*]Serial_Ch0 Master ST AS ARRAY 0 SATA Boot [*]Serial_Ch1 Master ST AS ARRAY 0 SATA Boot

70 D. (Serial Number View) Serial Number View <Enter> ( 11) VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View View the serial number of hard disk, it is useful for identify same model disks F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master ST AS ARRAY 0 SATA Stripe0 Serial_Ch1 Master ST AS ARRAY 0 SATA Stripe1 Serial Number: 3JT354CP 11 E. <F1> ( 12) VIA Tech. VT8237 SATA RAID Ver 2.31 Create Array Delete Array Create/Delete Spare Select Boot Array Serial Number View Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Array Name Array Mode Block Size(GB) Size(GB) ARRAY 0 Stripe 64K GA-8VM800PMD-775-RH

71 (4) SATA SATA SATA DOS ( ) SATA MS- 1 MS-DOS D:\> D:\> ENTER ( 13) cd bootdrv menu C C) VIA 8237 Series ATA ( ) BootDrv MENU.exe ( 15) MS-DOS

72 (5) SATA SATA Microsoft Windows 2000 XP SATA ( Microsoft Windows XP ) 1 Microsoft Windows XP F6 if you need to install a 3rd party SCSI or RAID driver ( 16) Press <F6> Windows Setup Press F6 if you need to install a third party SCSI or RAID driver SATA <S> ( 17) Windows Setup Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s) <none> * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit 17 GA-8VM800PMD-775-RH

73 3 VIA VT8237/6421/6410 SATA RAID Controller ( 18) SATA <Enter> Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. ENTER=Select F3=Exit 18 SATA 4 <Enter> SATA 1 Windows Setup Setup will load support for the following mass storage device(s): VIA VT8237/6421/6410 STAT RAID Controller * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit

74 SATA ( 20) <ENTER> Microsoft Windows XP WindowsXP Professional Windows (R) XP Microsoft(R) Windows XP R Windows XP Windows XP F3 ENTER= R= F3= 20 GA-8VM800PMD-775-RH

75 4-1-5 / / Sound Effect 3. (2 ) " "

76 1. 2. Sound Effect 3. (4 ) Only SURROUND-KIT " " ( ) " " GA-8VM800PMD-775-RH

77 / / 1. / 2. Sound Effect (6 ) Only SURROUND-KIT "

78 ( Audio Combo Kit ) Audio Combo Kit SPDIF ( ) SOURROUND-Kit ( / ) ) ( 6 ( OK ) Audio Combo Kit 6 1. Audio Combo Kit 2. SURROUND-Kit SUR_CEN 3. SURROUND-KIT / SURROUND-Kit REAR R/L SUB CENTER GA-8VM800PMD-775-RH

79 4. Sound Effect (6 ) Only SURROUND-KIT " " " " ( )

80 SPDIF ( ) SPDIF SPDIF SPDIF 1. SPDIF 2. SPDIF SPDIF_IO 3. SPDIF SPDIF SPDIF GA-8VM800PMD-775-RH

81 4-2 " " "Del" "Ctrl + F1" / / CMOS Clear CMOS CMOS CMOS CMOS CMOS ( ) ( ) Defaults) Del "Load Fail-Safe Defaults"( Load Optimized Award AWARD : 1 2 CMOS

83 - 83 -

85 - 85 -

86 ( ) ( ) ( ) 3 "SN" SN SN "SN" 5. a. b. c. d. e. f. ~ 11:00~21:00 11:00~18:00( ) - 14 (02) (02) ~ 8:30 ~ 17:30 ( ) (02) ~ 9:00 ~ 12:00 13:00 ~ 17:00( ) 18 (03) ~ 11:00~21:00 11:00~18:00( ) 278 (03) ~ 11:00~21:00 11:00~18:00( ) 81 (04) ~ 11:00~21:00 11:00~18:00( ) 145 (06) ~ 11:00~21:00 11:00~18:00( ) 51-1 (07) GA-8VM800PMD-775-RH

87 (2) (2) : ~ 09:30~ 08:30 09:30~ 05:30 / ( ) ( ) G.B.T. INC G.B.T Inc (USA) x 215 (Soporte de habla hispano) Correo: soporte@gigabyte-usa.com NIPPON GIGA-BYTE CORPORATION GIGA-BYTE SINGAPORE PTE. LTD ext ext GIGABYTE TECHNOLOGY (INDIA) LIMITED GIGABYTE TECHNOLOGY PTY. LTD

88 G.B.T. TECHNOLOGY TRADING GMBH G.B.T. TECH. CO., LTD. GIGA-BYTE TECHNOLOGY B.V. GIGABYTE TECHNOLOGY FRANCE GIGA-BYTE SPAIN Representative Office Of GIGA-BYTE Technology Co., Ltd. in CZECH REPUBLIC Representative Office Of GIGA-BYTE Technology Co., Ltd. in TURKEY Moscow Representative Office Of GIGA-BYTE Technology Co., Ltd. GIGA-BYTE Latvia Office of GIGA-BYTE TECHNOLOGY Co., Ltd. in POLAND Representative Office Of GIGA-BYTE Technology Co., Ltd. in Romania Representative Office Of GIGA-BYTE Technology Co., Ltd. in SERBIA & MONTENEGRO ( ) GA-8VM800PMD-775-RH