Tioli IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent Version 2.3 User's Guide SC27-2349-01
Tioli IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent Version 2.3 User's Guide SC27-2349-01
Note Before using this information and the product it supports, read the information in Appendix D, Notices, on page 123. This edition applies to ersion 2.3 of IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent (product number 5698 B12) and to all subsequent releases and modifications until otherwise indicated in new editions. Copyright IBM Corporation 2010. US Goernment Users Restricted Rights Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Contents Tables............................ ii Chapter 1. Oeriew of the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent....................... 1 IBM Tioli Monitoring oeriew................... 1 Features of the monitoring agent................... 1 Functions of the monitoring agent.................. 1 New in this release........................ 2 Components of the IBM Tioli Monitoring enironment........... 2 User interface options....................... 2 Chapter 2. Requirements for the monitoring agent........... 5 Requirements for the monitoring agent................ 5 Installing language packs..................... 6 Windows systems....................... 6 UNIX or Linux systems..................... 6 Chapter 3. Workspaces reference.................. 9 About workspaces........................ 9 More information about workspaces.................. 9 Predefined workspaces...................... 9 Agent Naigator items...................... 10 IBM Tioli Adanced Audit for DFSMShsm Naigator item........ 10 Agent Status Summary Naigator item............... 10 Backup Control Data Set Error Summary Naigator item........ 11 HSEND List Eent Information Naigator item............ 11 HSM Tape Error Summary Naigator item.............. 11 LISTCAT Eent Information Naigator item.............. 11 Migration Control Data Set Error Summary Naigator item........ 11 Offline Control Data Set Error Summary Naigator item......... 12 Chapter 4. Attributes reference.................. 13 About attributes........................ 13 More information about attributes.................. 13 Attribute groups and attributes for the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent....................... 13 Agent Status Summary attribute group................ 16 Backup Control Data Set Error Summary attribute group......... 17 BCDS Error Group1 attribute group................. 18 BCDS Error Group2 attribute group................. 20 BCDS Error Group3 attribute group................. 22 BCDS Error Group4 attribute group................. 23 BCDS Error Group5 attribute group................. 25 BCDS Error Group6 attribute group................. 26 BCDS Error Group7 attribute group................. 27 BCDS Error Group8 attribute group................. 29 HSEND List Eent Information attribute group............. 30 HSM Tape Error Summary attribute group............... 32 HSMTAPE Error Group1 attribute group................ 33 HSMTAPE Error Group2 attribute group................ 34 LISTCAT Eent Information attribute group.............. 35 MCDS Error Group1 attribute group................. 36 MCDS Error Group2 attribute group................. 38 Copyright IBM Corp. 2010 iii
MCDS Error Group3 attribute group................. 39 MCDS Error Group4 attribute group................. 40 MCDS Error Group5 attribute group................. 41 MCDS Error Group6 attribute group................. 42 MCDS Error Group7 attribute group................. 44 Migration Control Data Set Error Summary attribute group......... 45 OCDS Error Group1 attribute group................. 47 OCDS Error Group2 attribute group................. 48 OCDS Error Group3 attribute group................. 49 OCDS Error Group4 attribute group................. 50 OCDS Error Group5 attribute group................. 52 Offline Control Data Set Error Summary attribute group.......... 53 Performance Object Status attribute group............... 54 Product Adice attribute group................... 57 Disk capacity planning for historical data............... 58 Chapter 5. Situations reference.................. 61 About situations........................ 61 More information about situations.................. 61 Predefined situations....................... 62 IBM Tioli Adanced Audit for DFSMShsm Naigator item......... 62 Agent Status Summary Naigator item................ 63 Backup Control Data Set Error Summary Naigator item......... 63 KRG_BCDS_Critical_Error situation................ 63 HSEND List Eent Information Naigator item............. 63 HSM Tape Error Summary Naigator item............... 63 KRG_HSM_Tape_Critical_Errors situation.............. 63 LISTCAT Eent Information Naigator item.............. 64 Migration Control Data Set Error Summary Naigator item......... 64 KRG_MCDS_Critical_Error situation................ 64 Offline Control Data Set Error Summary Naigator item.......... 65 KRG_OCDS_Critical_Error situation................ 65 Chapter 6. Take Action commands reference............. 67 About Take Action commands................... 67 More information about Take Action commands............. 67 Predefined Take Action commands................. 67 HSEND_LIST_DSNAME action................... 68 HSEND_LIST_TTOC action.................... 69 LISTCAT_ENT action...................... 70 Chapter 7. Policies reference................... 73 About policies......................... 73 More information about policies................... 73 Predefined policies....................... 73 Chapter 8. Troubleshooting.................... 75 Gathering product information for IBM Software Support.......... 75 Built-in troubleshooting features................... 75 Problem classification...................... 75 Trace logging......................... 76 Oeriew of log file management................. 76 Principal trace log files..................... 76 Setting RAS trace parameters.................. 79 Problems and workarounds.................... 81 Installation and configuration troubleshooting............. 81 i IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Remote deployment troubleshooting................ 83 Agent troubleshooting..................... 84 Workspace troubleshooting................... 85 Situation troubleshooting.................... 87 Take Action commands troubleshooting............... 90 Tioli Common Reporting troubleshooting.............. 90 Support information....................... 90 Informational, warning, and error messages.............. 91 Message format....................... 91 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent messages... 92 Appendix A. IBM Tioli Enterprise Console eent mapping....... 109 Appendix B. Documentation library................ 119 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent library..... 119 Prerequisite publications..................... 119 Related publications...................... 120 Other sources of documentation.................. 120 Appendix C. Accessibility.................... 121 Naigating the interface using the keyboard.............. 121 Magnifying what is displayed on the screen.............. 121 Appendix D. Notices...................... 123 Trademarks.......................... 124 Index............................ 127 Contents
i IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Tables 1. Capacity planning for historical data logged by Adanced Audit for DFSMShsm........ 59 2. Information to gather before contacting IBM Software Support.............. 75 3. Trace log files for troubleshooting agents...................... 77 4. Problems and solutions for installation and configuration................ 82 5. General problems and solutions for uninstallation................... 83 6. Remote deployment problems and solutions..................... 84 7. Agent problems and solutions.......................... 84 8. Workspace problems and solutions........................ 86 9. General situation problems and solutions...................... 87 10. Problems with configuring situations that you sole in the Situation Editor.......... 88 11. Problems with configuration of situations that you sole in the Workspace area........ 89 12. Take Action commands problems and solutions................... 90 13. Tioli Common Reporting for IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent problems and solutions............................ 90 Copyright IBM Corp. 2010 ii
iii IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Chapter 1. Oeriew of the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent The IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent proides you with the capability to monitor IBM Tioli Adanced Audit for DFSMShsm, and to perform basic actions with IBM Tioli Adanced Audit for DFSMShsm. This chapter proides a description of the features, components, and interface options for the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent. IBM Tioli Monitoring oeriew IBM Tioli Monitoring is the base software for the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent. IBM Tioli Monitoring proides a way to monitor the aailability and performance of all the systems in your enterprise from one or seeral designated workstations. It also proides useful historical data that you can use to track trends and to troubleshoot system problems. You can use IBM Tioli Monitoring to perform the following tasks: Monitor for alerts on the systems that you are managing by using predefined situations or custom situations. Establish your own performance thresholds. Trace the causes leading to an alert. Gather comprehensie data about system conditions. Use policies to perform actions, schedule work, and automate manual tasks. The Tioli Enterprise Portal is the interface for IBM Tioli Monitoring products. By proiding a consolidated iew of your enironment, the Tioli Enterprise Portal permits you to monitor and resole performance issues throughout the enterprise. See the IBM Tioli Monitoring publications listed in Prerequisite publications on page 119 for complete information about IBM Tioli Monitoring and the Tioli Enterprise Portal. Features of the monitoring agent The IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent software can identify, notify you of, and correct common problems with the application that it monitors. The software includes the following features: Monitoring Data gathering Eent management Operations management Functions of the monitoring agent The IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent proides the following functions: Adanced Audit for DFSMShsm TEP Enablement Proide TEP enablement for Adanced Audit for DFSMShsm Copyright IBM Corp. 2010 1
New in this release For ersion 2.3 of the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent, the following enhancements hae been made since ersion 2.2, including the fix packs: New attribute group: Product Adice. This attribute group proides detailed information regarding Adanced Audit Error IDs and suggestions for correctie actions. Components of the IBM Tioli Monitoring enironment User interface options After you install and set up the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent, you hae an enironment that contains the client, serer, and monitoring agent implementation for IBM Tioli Monitoring that contains the following components: Tioli Enterprise Portal client with a Jaa -based user interface for iewing and monitoring your enterprise. Tioli Enterprise Portal Serer that is placed between the client and the Tioli Enterprise Monitoring Serer and enables retrieal, manipulation, and analysis of data from the monitoring agents. The Tioli Enterprise Portal Serer is the central repository for all user data. Tioli Enterprise Monitoring Serer that acts as a collection and control point for alerts receied from the monitoring agents, and collects their performance and aailability data. The Tioli Enterprise Monitoring Serer is also a repository for historical data. Tioli Enterprise Monitoring Agent, IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent. This monitoring agent collects and distributes data to a Tioli Enterprise Portal Serer. IBM Tioli Enterprise Console is an optional component, which acts as a central collection point for eents from a ariety of sources, including those from other Tioli software applications, Tioli partner applications, custom applications, network management platforms, and relational database systems. You can iew these eents through the Tioli Enterprise Portal (using the eent iewer), and you can forward eents from IBM Tioli Monitoring situations to the IBM Tioli Enterprise Console component. Installation of the base software and other integrated applications proides the following interfaces that you can use to work with your resources and data: Tioli Enterprise Portal browser client interface The browser client interface is automatically installed with the Tioli Enterprise Portal Serer. To start the Tioli Enterprise Portal browser client in your Internet browser, enter the URL for a specific Tioli Enterprise Portal browser client installed on your Web serer. Tioli Enterprise Portal desktop client interface The desktop client interface is a Jaa-based graphical user interface (GUI) on a Windows or Linux workstation. IBM Tioli Enterprise Console An eent management application that integrates system, network, database, and application management to help ensure the optimal aailability of an IT serices for an organization. 2 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Manage Tioli Enterprise Monitoring Serices window The window for the Manage Tioli Enterprise Monitoring Serices utility is used for configuring the agent and starting Tioli serices not already designated to start automatically. Chapter 1. Oeriew of the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent 3
4 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Chapter 2. Requirements for the monitoring agent This chapter contains information about the requirements for the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent. To install and configure the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent, use the procedures for installing monitoring agents in the IBM Tioli Monitoring Installation and Setup Guide. If you are performing a silent installation using a response file, see the information about performing a silent installation in the IBM Tioli Monitoring Installation and Setup Guide. Requirements for the monitoring agent In addition to the requirements described in the IBM Tioli Monitoring Installation and Setup Guide, the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent has the following requirements: The monitoring agent runs on any of these operating systems: Windows 2003 Serer SE (32 bit) with Serice Pack 1 or higher If running this monitoring agent on a Windows operating system, the User ID must hae Administrator priileges. Note: For the most current information about the operating systems that are supported, see http://www-306.ibm.com/software/sysmgmt/products/ support/tioli_supported_platforms.html. This agent monitors the following ersions: IBM Tioli Adanced Audit for DFSMShsm 2.3 A single computer that hosts the hub monitoring serer, portal serer, and a monitoring agent requires approximately 300 MB of space. A computer that hosts only the monitoring agent requires approximately 30 MB of space, including the specific enablement code for the monitoring agent. More space is required for each additional monitoring agent that you deploy on the monitoring computer. The monitoring agent must be connected to the following software: IBM Tioli Monitoring V6.2 After you install the prerequisite software, install the following software, which is required for the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent to operate: IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent for Tioli Enterprise Monitoring Serer support IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent for Tioli Enterprise Portal Serer support IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent for Tioli Enterprise Portal Desktop Client support IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent for Tioli Enterprise Portal Browser Client support Copyright IBM Corp. 2010 5
Installing language packs Windows systems UNIX or Linux systems To install a language pack, first make sure that you hae already installed the product in English, then perform the following steps depending on which operating system you are using. 1. Double-click lpinstaller.bat in the language pack CD to launch the installation program. 2. Select the language of the installer and click OK. 3. Click Next on the Introduction panel. 4. Click Add/Update and click Next. 5. Select the folder in which the National Language Support package (NLSPackage) files are located. Note: Usually the NLSPackage files are located in the nlspackage folder where the installer executable is located. 6. Select the language support for the agent of your choice and click Next. Note: Hold down the Ctrl key for multiple selections. 7. Select the languages that you want to install and click Next. 8. Examine the installation summary page and click Next to begin installation. 9. Click Finish after installation completes to exit the installer. 10. Restart Tioli Enterprise Portal Desktop Client, Tioli Enterprise Portal Serer, and Eclipse Help Serer if any of these components are installed. 1. Run the following command to create a temporary directory on the computer. Make sure that the full path of the directory does not contain any spaces: mkdir dir_name 2. Mount the language pack CD to the temporary directory you just created. 3. Run the following command to launch the installation program: cd dir_name lpinstaller.sh -c ITM Home Directory Where ITM Home Directory is where you installed IBM Tioli Monitoring. Usually it is /opt/ibm/itm for AIX and Linux. 4. Select the language of the installer and click OK. 5. Click Next on the Introduction panel. 6. Click Add/Update and click Next. 7. Select the folder in which the National Language Support package (NLSPackage) files are located. Note: Usually, the NLSPackage files are located in the nlspackage folder where the installer executable is located. 8. Select the language support for the agent of your choice and click Next. Note: Hold down the Ctrl key for multiple selections. 9. Select the languages that you want to install and click Next. 10. Examine the installation summary page and click Next to begin installation. 6 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
11. Click Finish after installation completes to exit the installer. 12. Restart Tioli Enterprise Portal Desktop Client, Tioli Enterprise Portal Serer, and Eclipse Help Serer if any of these components are installed. Chapter 2. Requirements for the monitoring agent 7
8 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Chapter 3. Workspaces reference About workspaces This chapter contains an oeriew of workspaces, references for detailed information about workspaces, and descriptions of the predefined workspaces included in this monitoring agent. A workspace is the working area of the Tioli Enterprise Portal application window. At the left of the workspace is a Naigator that you use to select the workspace you want to see. As part of the application window, the right side of the status bar shows the Tioli Enterprise Portal serer name and port number to which the displayed information applies, and the ID of the current user. When you select an item in the Naigator tree, a default workspace is displayed. When you right-click a Naigator item, a menu that includes a Workspace item is displayed. The Workspace item contains a list of workspaces for that Naigator item. Each workspace has at least one iew. Some iews hae links to other workspaces. This monitoring agent proides predefined workspaces. You cannot modify or delete the predefined workspaces, but you can create new workspaces by editing them and saing the changes with a different name. A table iew within a workspace corresponds to a group of attributes; the columns in the table iew show some or all of the attributes aailable in the attribute group. More information about workspaces Predefined workspaces For more information about creating, customizing, and working with workspaces, see the Tioli Enterprise Portal User's Guide. For a list of the predefined workspaces for this monitoring agent and a description of each workspace, refer to the Predefined workspaces section in this chapter and the information in that section for each indiidual workspace. Some attribute groups for this monitoring agent might not be represented in the predefined workspaces or iews for this agent. For a full list of the attribute groups, see the Attributes reference section. The IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent proides the following predefined workspaces, which are organized by Naigator item. IBM Tioli Adanced Audit for DFSMShsm Naigator item IBM Tioli Adanced Audit for DFSMShsm workspace Agent Status Summary Naigator item Agent Status Summary workspace Backup Control Data Set Error Summary Naigator item Backup Control Data Set Error Summary workspace HSEND List Eent Information Naigator item HSEND List Eent Information workspace Copyright IBM Corp. 2010 9
HSM Tape Error Summary Naigator item HSM Tape Error Summary workspace LISTCAT Eent Information Naigator item LISTCAT Eent Information workspace Migration Control Data Set Error Summary Naigator item Migration Control Data Set Error Summary workspace Offline Control Data Set Error Summary Naigator item Offline Control Data Set Error Summary workspace Agent Naigator items This section contains descriptions of predefined workspaces. The workspaces are organized by the Naigator item to which the workspaces are releant. IBM Tioli Adanced Audit for DFSMShsm Naigator item IBM Tioli Adanced Audit for DFSMShsm workspace This workspace proides a graphical summary of DFSMShsm errors receied. This workspace contains the following iews: HSM Tape Error Summary Graphical summaries of DFSMShsm errors BCDS Error Summary Graphical summaries of DFSMShsm errors MCDS Error Summary Graphical summaries of DFSMShsm errors OCDS Error Summary Graphical summaries of DFSMShsm errors Agent Status Summary Naigator item Agent Status Summary workspace Error message report summary. This workspace contains the following iews: Agent Object Status Report summaries of DFSMShsm errors receied. BCDS Error IDs Exceeding Message Limit Report summaries of DFSMShsm errors receied. MCDS Error IDs Exceeding Message Limit Report summaries of DFSMShsm errors receied. OCDS Error IDs Exceeding Message Limit Report summaries of DFSMShsm errors receied. HSM Tape Error IDs Exceeding Message Limit Report summaries of DFSMShsm errors receied. 10 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Backup Control Data Set Error Summary Naigator item Backup Control Data Set Error Summary workspace This workspace contains report and graphical information on DFSMShsm BCDS errors. This workspace contains the following iews: Backup Control Data Set Error Summary Report and graphical information of DFSMShsm BCDS errors. BCDS Error Summary Report and graphical information of DFSMShsm BCDS errors. HSEND List Eent Information Naigator item HSEND List Eent Information workspace HSEND List Eent Information workspace proides information on eent details. This workspace contains the following iew: HSEND List Eent Information Shows HSEND commands issued as a result of Take Action. HSM Tape Error Summary Naigator item HSM Tape Error Summary workspace The Return Code Summary workspace proides summary information for HSM Tape Error. This workspace contains the following iew: HSM Tape Error Summary HSM Tape Error Summary. LISTCAT Eent Information Naigator item LISTCAT Eent Information workspace LISTCAT Eent Information workspace proides results from the LISTCAT Take Action. This workspace contains the following iew: LISTCAT Eent Information Shows LISTCAT commands and their output issued as a result of Take Action. Migration Control Data Set Error Summary Naigator item Migration Control Data Set Error Summary workspace This workspace contains report and graphical information on DFSMShsm MCDS errors. This workspace contains the following iews: Migration Control Data Set Error Summary Report and graphical information of DFSMShsm MCDS errors. MCDS Error Summary Report and graphical information of DFSMShsm MCDS errors. Chapter 3. Workspaces reference 11
Offline Control Data Set Error Summary Naigator item Offline Control Data Set Error Summary workspace This workspace contains report and graphical information on DFSMShsm OCDS errors. This workspace contains the following iews: Offline Control Data Set Error Summary Report and graphical information of DFSMShsm OCDS errors. OCDS Error Summary Report and graphical information of DFSMShsm OCDS errors. 12 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Chapter 4. Attributes reference About attributes This chapter contains an oeriew of attributes, references for detailed information about attributes, and descriptions of the attributes for each attribute group included in this monitoring agent. Attributes are the application properties being measured and reported by the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent. Attributes are organized into groups according to their purpose. The attributes in a group can be used in the following two ways: Chart or table iews Attributes are displayed in chart and table iews. The chart and table iews use queries to specify which attribute alues to request from a monitoring agent. You use the Query editor to create a new query, modify an existing query, or apply filters and set styles to define the content and appearance of a iew based on an existing query. Situations You use attributes to create situations that monitor the state of your operating system, database, or application. A situation describes a condition you want to test. When you start a situation, the Tioli Enterprise Portal compares the alues you hae assigned to the situation attributes with the alues collected by the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent and registers an eent if the condition is met. You are alerted to eents by indicator icons that are displayed in the Naigator. More information about attributes For more information about using attributes and attribute groups, see the Tioli Enterprise Portal User's Guide. For a list of the attributes groups, a list of the attributes in each attribute group, and descriptions of the attributes for this monitoring agent, see the Attribute groups and attributes section in this chapter. Attribute groups and attributes for the IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent This monitoring agent contains the following attribute groups. The table name depends on the maximum table name limits of the target database being used for Tioli Data Warehouse. If the maximum name is 30 characters, then any warehouse table name longer than 30 characters is shortened to the table name. Attribute group name: Agent Status Summary Table name: KRGAGTERRM Warehouse table name: KRG_AGENT_STATUS_SUMMARY or KRGAGTERRM Attribute group name: Backup Control Data Set Error Summary Table name: KRGBCDSUM Copyright IBM Corp. 2010 13
Warehouse table name: KRG_BACKUP_CONTROL_DATA_SET_ERROR_SUMMARY or KRGBCDSUM Attribute group name: BCDS Error Group1 Table name: KRGBCDEG1 Warehouse table name: KRG_BCDS_ERROR_GROUP1 or KRGBCDEG1 Attribute group name: BCDS Error Group2 Table name: KRGBCDEG2 Warehouse table name: KRG_BCDS_ERROR_GROUP2 or KRGBCDEG2 Attribute group name: BCDS Error Group3 Table name: KRGBCDEG3 Warehouse table name: KRG_BCDS_ERROR_GROUP3 or KRGBCDEG3 Attribute group name: BCDS Error Group4 Table name: KRGBCDEG4 Warehouse table name: KRG_BCDS_ERROR_GROUP4 or KRGBCDEG4 Attribute group name: BCDS Error Group5 Table name: KRGBCDEG5 Warehouse table name: KRG_BCDS_ERROR_GROUP5 or KRGBCDEG5 Attribute group name: BCDS Error Group6 Table name: KRGBCDEG6 Warehouse table name: KRG_BCDS_ERROR_GROUP6 or KRGBCDEG6 Attribute group name: BCDS Error Group7 Table name: KRGBCDEG7 Warehouse table name: KRG_BCDS_ERROR_GROUP7 or KRGBCDEG7 Attribute group name: BCDS Error Group8 Table name: KRGBCDEG8 Warehouse table name: KRG_BCDS_ERROR_GROUP8 or KRGBCDEG8 Attribute group name: Product Adice Table name: KRGAAEXPAV Warehouse table name: KRG_EXPERT_ADVICE or KRGAAEXPAV Attribute group name: HSEND List Eent Information Table name: KRGZHEVENT Warehouse table name: KRG_HSEND_LIST_EVENT_INFORMATION or KRGZHEVENT Attribute group name: HSM Tape Error Summary Table name: KRGTAPSUM Warehouse table name: KRG_HSM_TAPE_ERROR_SUMMARY or KRGTAPSUM Attribute group name: HSMTAPE Error Group1 Table name: KRGTPDEG1 Warehouse table name: KRG_HSMTAPE_ERROR_GROUP1 or KRGTPDEG1 Attribute group name: HSMTAPE Error Group2 Table name: KRGTPDEG2 Warehouse table name: KRG_HSMTAPE_ERROR_GROUP2 or KRGTPDEG2 Attribute group name: LISTCAT Eent Information Table name: KRGZLEVENT 14 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Warehouse table name: KRG_LISTCAT_EVENT_INFORMATION or KRGZLEVENT Attribute group name: MCDS Error Group1 Table name: KRGMCDEG1 Warehouse table name: KRG_MCDS_ERROR_GROUP1 or KRGMCDEG1 Attribute group name: MCDS Error Group2 Table name: KRGMCDEG2 Warehouse table name: KRG_MCDS_ERROR_GROUP2 or KRGMCDEG2 Attribute group name: MCDS Error Group3 Table name: KRGMCDEG3 Warehouse table name: KRG_MCDS_ERROR_GROUP3 or KRGMCDEG3 Attribute group name: MCDS Error Group4 Table name: KRGMCDEG4 Warehouse table name: KRG_MCDS_ERROR_GROUP4 or KRGMCDEG4 Attribute group name: MCDS Error Group5 Table name: KRGMCDEG5 Warehouse table name: KRG_MCDS_ERROR_GROUP5 or KRGMCDEG5 Attribute group name: MCDS Error Group6 Table name: KRGMCDEG6 Warehouse table name: KRG_MCDS_ERROR_GROUP6 or KRGMCDEG6 Attribute group name: MCDS Error Group7 Table name: KRGMCDEG7 Warehouse table name: KRG_MCDS_ERROR_GROUP7 or KRGMCDEG7 Attribute group name: Migration Control Data Set Error Summary Table name: KRGMCDSUM Warehouse table name: KRG_MIGRATION_CONTROL_DATA_SET_ERROR_SUMMARY or KRGMCDSUM Attribute group name: OCDS Error Group1 Table name: KRGOCDEG1 Warehouse table name: KRG_OCDS_ERROR_GROUP1 or KRGOCDEG1 Attribute group name: OCDS Error Group2 Table name: KRGOCDEG2 Warehouse table name: KRG_OCDS_ERROR_GROUP2 or KRGOCDEG2 Attribute group name: OCDS Error Group3 Table name: KRGOCDEG3 Warehouse table name: KRG_OCDS_ERROR_GROUP3 or KRGOCDEG3 Attribute group name: OCDS Error Group4 Table name: KRGOCDEG4 Warehouse table name: KRG_OCDS_ERROR_GROUP4 or KRGOCDEG4 Attribute group name: OCDS Error Group5 Table name: KRGOCDEG5 Warehouse table name: KRG_OCDS_ERROR_GROUP5 or KRGOCDEG5 Attribute group name: Offline Control Data Set Error Summary Table name: KRGOCDSUM Chapter 4. Attributes reference 15
Warehouse table name: KRG_OFFLINE_CONTROL_DATA_SET_ERROR_SUMMARY or KRGOCDSUM Attribute group name: Performance Object Status Table name: KRGPOBJST Warehouse table name: KRG_PERFORMANCE_OBJECT_STATUS or KRGPOBJST The remaining sections of this chapter contain descriptions of these attribute groups, which are listed alphabetically. The following information is proided for each attribute group: Historical group Whether the attribute group is a historical type that you can roll off to a data warehouse Attribute descriptions, type, and Warehouse name for each attribute in the attribute group Some attributes are designated as key attributes. A key attribute is an attribute that is used in warehouse aggregation to identify rows of data that represent the same object. Agent Status Summary attribute group Agent error messages If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the Agent Status Summary attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error Sequence Number attribute - This attribute is a key attribute. Error sequence number Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: 16 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Attribute Group attribute Attribute group error message applies to. Error Message attribute Error message Backup Control Data Set Error Summary attribute group Backup Control Data Set Error Summary If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the Backup Control Data Set Error Summary attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Diagnostic error ID Record Count attribute Diagnostic record count Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Chapter 4. Attributes reference 17
Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Error Message attribute Diagnostic error message Error Count attribute Diagnostic error count Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Error Type attribute Error format type Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. BCDS Error Group1 attribute group Backup control data set error group 1 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the BCDS Error Group1 attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute 18 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Diagnostic error ID Data Set Name attribute Data set name HSM Internal Data Set Name attribute HSM internal data set name Backup Date attribute Backup date VSAM Flag attribute VSAM or non-vsam Type Integer with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Non-VSAM (0) VSAM (1) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Backup Version attribute Backup ersion number Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Volser attribute Volser Chapter 4. Attributes reference 19
BCDS Error Group2 attribute group Backup control data set error group 2 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the BCDS Error Group2 attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Diagnostic error ID Data Set Name attribute Data set name HSM Internal Data Set Name attribute HSM internal data set name Volser attribute Volser Backup Date attribute Backup date VSAM Flag attribute VSAM or non-vsam 20 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Type Integer with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Non-VSAM (0) VSAM (1) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Tape/DASD attribute Tape or DASD Type Integer with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Tape (0) DASD (1) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Backup Version attribute Backup ersion number Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Backup Generation attribute Backup generation number HSM Tape Type attribute HSM tape type TTOC Extension Number attribute TTOC extension number Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Chapter 4. Attributes reference 21
Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Primary Volser attribute Primary olser BCDS Error Group3 attribute group Backup control data set error group 3 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the BCDS Error Group3 attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Diagnostic error ID Data Set Name attribute Data set name HSM Internal Data Set Name attribute HSM internal data set name Volser attribute Volser 22 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Backup Date attribute Backup date VSAM Flag attribute VSAM or non-vsam Type Integer with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Non-VSAM (0) VSAM (1) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Tape/DASD attribute Tape or DASD Type Integer with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Tape (0) DASD (1) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. VTOC Error attribute VTOC Error Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. BCDS Error Group4 attribute group Backup control data set error group 4 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Chapter 4. Attributes reference 23
Attribute descriptions The following list contains information about each attribute in the BCDS Error Group4 attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Diagnostic error ID Data Set Name attribute Data set name HSM Internal Data Set Name attribute HSM internal data set name Volser attribute Volser Backup Date attribute Backup date VSAM Flag attribute VSAM or non-vsam Type Integer with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Non-VSAM (0) VSAM (1) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Tape/DASD attribute 24 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Tape or DASD Type Integer with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Tape (0) DASD (1) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Backup Version attribute Backup ersion Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Backup Owner attribute Backup owner BCDS Error Group5 attribute group Backup control data set error group 5 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the BCDS Error Group5 attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Chapter 4. Attributes reference 25
Diagnostic error ID Volser attribute Volser HSM Tape Type attribute HSM tape type Tape Reference Count attribute Tape reference count Type BCDS Error Group6 attribute group Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Backup control data set error group 6 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the BCDS Error Group6 attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. 26 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Diagnostic error ID Volser attribute Volser HSM Tape Type attribute HSM tape type Valid Blocks attribute Counted alid blocks Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Block Count attribute Block count (TTOC) Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. TTOC/Update Date attribute TTOC update date TTOC/Create Date attribute TTOC create date BCDS Error Group7 attribute group Backup control data set error group 7 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Chapter 4. Attributes reference 27
Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the BCDS Error Group7 attribute group: Node attribute - This attribute is a key attribute. The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Diagnostic error ID Migrate Volser attribute Migrate olser HSM Tape Type attribute HSM tape type TTOC Extension Number attribute TTOC extension number Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Data Set Name Flag attribute Data set name flag Data set Patch Valid Flag attribute 28 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide
Data set patch alid flag TTOC Data Set Offset attribute Offset to data set in TTOC Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. TTOC Flag Offset attribute Offset to flag byte in TTOC Type Integer (Counter) with enumerated alues. The strings are displayed in the Tioli Enterprise Portal. The warehouse and queries return the alues shown in parentheses. The following alues are defined: Value_Exceeds_Maximum (2147483647) Value_Exceeds_Minimum (-2147483648) Any other alues will display the actual alue returned by the agent in the Tioli Enterprise Portal. Alias Name attribute Alias name in TTOC True Name attribute True name from BCD/MCC BCDS Error Group8 attribute group Backup control data set error group 8 If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. Historical group This attribute group is part of the default historical group, and is eligible for use with Tioli Data Warehouse. Attribute descriptions The following list contains information about each attribute in the BCDS Error Group8 attribute group: Node attribute - This attribute is a key attribute. Chapter 4. Attributes reference 29
The managed system name of the agent. Timestamp attribute The local time at the agent when the data was collected. Error ID attribute - This attribute is a key attribute. Diagnostic error ID Duplicate Volser attribute Volser of Duplicate Volume Type attribute Volume Type Status attribute Status Conflicting Volser attribute Conflicting Volser Volume Type attribute Volume Type Status attribute Status HSEND List Eent Information attribute group The attribute group proides eent information from the HSEND List command. If the warehouse default setting is enabled, data for this attribute group is stored in Tioli Data Warehouse. 30 IBM Tioli Adanced Audit for DFSMShsm Monitoring Agent: User's Guide