MANUAL LD-185DCH HD COMBI TV, DVD and DVB-T LD-216DCH HD COMBI TV, DVD and DVB-T Please read this manual carefully before operating your TV.
IMPORTANT SAFETY INSTRUCTIONS This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. T h i s symbol i n d i c ates i m p o r t a n t i n structions accompanying the product. Please read this manual carefully before using this product. Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the LCD TV corresponds to the local electrical supply. If you are unsure of your power supply, ask your local power company. Never insert anything metallic into the cabinet openings of the liquid crystal display LCD TV/monitor; otherwise it may create the danger of electric shock. To avoid electric shock, never touch the inside of the LCD TV/monitor and adapter. Only a qualified technician should open the case of the LCD TV/ monitor/adapter. Never use your LCD TV/monitor/adapter if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from place where people can trip over it. Be sure to hold the plug, not the cord, when disconnecting the adapter from an electric socket. Openings in the LCD TV/monitor/adapter cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD TV/monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD TV/monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. Do not expose the LCD TV/monitor to extreme temperature conditions or to extreme humidity conditions. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
IMPORTANT SAFETY INSTRUCTIONS Do not place the LCD TV/monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. It is damaged if dropped, hit or scratched. Do not clean the front with keton-type materials (e.g. Acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride-these may damage the panel. Locate your DC adapter near an easily accessible AC outlet. If your LCD TV/monitor does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service enter. High temperature can cause problems. Don t use your LCD TV/monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat. Unplug the DC adapter when it is going to be left unused for an extended period of time. To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only. If the LCD TV/monitor is broken, do not try to repair it yourself. Contact qualified service personnel. Unplug your DC adapter from the AC outlet before any service. Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shook, or other hazards. Following any service or repair, be sure the service technician performs safety checks to certify that your TFT-LCD TV/monitor is in safe operating order. The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.
SAFETY PRECAUTIONS This Display was designed and constructed in accordance with the rules of good manufacturing practice and in respect of European directives 2006/95/CE, and 2004/108/CE as regards safety and the elimination of radio interference. Follow the instructions and take the operating precautions indicated; incorrect use of the equipment could result in a fire or a risk of electrocution. This product complies with EU Directive 2002/96/EC The crossed bin symbol on the appliance indicates that the product, at the end of its life span, must be disposed of separately from domestic waste, either by taking it to a separate waste disposal site for electric and electronic appliances or by returning it to your dealer when you buy another similar appliance. The user is responsible for taking the appliance to a special waste disposal site at the end of its life span. If the appliance in question is collected correctly as separate waste, it can be recycled, treated and disposed of ecologically; this avoids a negative impact on both the environment and the health and contributes towards the recycling of the product's materials. For further information regarding the waste disposal services available, contact your local waste disposal agency or the point of sale where you bought the appliance.
ACCESSORIES Congratulations on your choice of a Flex-TV from People of Lava, Sweden. Before you begin, please do check that your box contained the following accessories User manual (Manual) Remote control and battery FM antenna Power adapter Automotive Power socket adapter For using Automotive power socket adapter, please plug it with TV first. As part of People of Lava environmental policy your machine is equipped with a power saving feature which after four hours of inactivity (no channel change, volume control, source switching, etc.) shuts the TV off. This is preceded by a warning message informing that the shutdown will take place within 60sec. Do you wish to continue watching, press any button on the remote control and the countdown is interrupted.
CONTENT PANEL BUTTON FUNCTIONS Front panel... 1 Side panel...2 EXTERNAL EQUIPMENT Connecting diagram... 3 REMOTE CONTROL Remote buttons... 4 Battery installation...6 LET'S START Switching on... 7 Select source operation...7 DTV MENU Picture... 8 Sound...8 Channel... 9 Dtv setup...10 Function... 13 Electronic program guide (epg)...13 Information... 13 ATV MENU Picture... 14 Sound...14 Channel... 15 Function...16 TELETEXT FUNCTION Teletext function... 17 SCART/AV/S-VIDEO/HDMI/USB MENU Video setting menu... 18 VGA MENU VGA Setup... 19 Sound...19 Picture... 20 Function...20 FM MENU OPERATION Fm setting... 21 Sound...22 Function... 22
CONTENT USB OPERATION Brief introduction... 23 Playback...24 Play music... 26 Play movie...26 Operate in full screen state... 27 Play photo...28 Operate in full screen state... 28 DVD OPERATION Playback... 29 Volume control...29 VCD, SVCD menu playback... 30 Memory...30 Select track to play directly by number buttons... 31 Select language/audio...31 Repeat playback... 32 Repeat playback of selected segment...32 Fast playback... 33 Play from the desired position...33 Zooming the displayed frame... 34 MPEG4 and JPEG file playing...35 DVD FUNCTION Picture... 38 Sound...38 DVD setting... 38 Function...40 TROUBLESHOOTING Display troubleshooting... 41 Sound and tv troubleshooting...41 DVD troubleshooting... 42 SPECIFICATIONS Specifications... 43 DISPLAY MODE Display mode... 45
PANEL BUTTON FUNCTIONS FRONT PANEL Indicator (the indicator is red when in standby mode, and green when in working normally). IR sensor window RIGHT PANEL (Enter or exit TV menu) CHANNEL(Increase or decrease channel number) VOLUME(Increase or decrease volume) SOURCE(Select input source ) STANDBY (To switch standby m between ode and power-on mode.) - 1 -
PANEL BUTTON FUNCTIONS RIGHT PANEL USB interface SD/MMC/MS card reader interface STOP button EJECT button PLAY/PAUSE button LEFT PANEL HDMI 12-24V DC SCART PC / Audio COMPONENT Common Interface VGA COMPONENT Headphone TV Antenna FM Antenna - 2 -
EXTERNAL EQUIPMENT CONNECTING DIAGRAM HDMI DVD or VCR player NOTE You should insert all necessary cables BEFORE plugging in power cord. - 3 -
REMOTE CONTROL REMOTE BUTTONS POWER P.MODE 2 3 1 4 5 6 7 8 9 S.MODE CH+ 0 MUTE SLEEP EXIT TEXT MIX INDEX CALL RECALL SOURCE VOL+ I/II CANCEL REVEAL HOLD SIZE GOTO A-B REPEAT ANGLE DVD- MENU TITLE PBC AUDIO S.PAGE DISPLAY TV/RADIO EPG SUBTITLE ZOOMi CH- VOL- PAGE- PAGE+ ZOOM+ FAV SCALER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19. PBC/PAGE+ To setup the PBC on/off in DVD mode /browse the next page of teletext in analog TV mode. 20. AUDIO To change the audio language and sound track, valid in digital TV and DVD mode. 21. SUBTITLE To select subtitle's language or switch to JPEG display mode, valid in DVD and digital TV mode. 22. ZOOM+/EPG To zoom in to the picture valid in DVD mode/ To display the program guide valid in digital TV mode 20 21 22 1. MUTE Sound mute switch. 2. EJECT/FAV Disc in/out, valid in DVD mode/to switch in favorite list, valid in digital TV mode. 3. SCALER Change aspect ratio. 4. SLEEP To setup the sleep timer. 5. CALL To display the information on screen. 6. RECALL To swap between a previous program and the current program in analog TV and digital TV. 7. TWO-DIGIT number button To switch between one or two-digit program number. 8. SOURCE To select input source. 9. Number button To select program number. 10. Left/Right cursor(menu adjustment ) To move leftward/ rightward or adjust the selected item in the menu, or adjust sound volume (invalid in DVD, digital TV and FM mode). 11. OK button To confirm the selections. 12. VOL+/- To increase or decrease sound volume. 13. INDEX/ To display main content page when playing the teletext in analog TV/To stop playing valid in DVD mode. 14. I/II To switch the audio channel in NICAM /A2 or Mono TV channel (valid in analog TV). 15. HOLD/ To stop teletext on current page in analog TV/To select the previous chapter or track, valid in DVD mode. 16. SIZE/ To magnify teletext page in analog TV/To select the next chapter or track in DVD mode. 17. REPEAT/YELLOW To repeat playback (valid in DVD mode)/selet page in analog TV teletext mode/fast enter menu (invalid in digital TV, DVD and FM). 18. ANGLE/BLUE To change camera angle in DVD mode when playing DVD disc/select page in analog TV teletext mode /Fast enter menu(invalid in digital TV, DVD and FM) - 4 -
REMOTE CONTROL 23. POWER To switch between standby mode and poweron mode. 24. P-MODE To select picture mode: Standard, Dynamic, Soft, User (not valid in VGA mode). 25. S-MODE To select sound field modes: Music, Film, News and User. 26. To display setup menu. 27. EXIT To exit or back previous menu. 28. UP/DOWN cursor To select upward/downward in the menu or change the channel, valid in analog TV and digital TV mode. 29. CH+/- To increase or decrease program number valid in analog TV and digital TV mode. 30. MIX/ / To display analog TV and teletext in the same time/pause playing/steps playback in pause mode, valid in DVD mode. 31. TEXT/ To enable or disable the function of teletext or MHEG5 /To playback, valid in DVD mode. 32. REVEAL/ To display the hidden teletext information in analog TV/To fastforwards DVD playback, valid in DVD mode. 33. CANCEL/ To cancel teletext in analog TV/ To fast backward playback, valid in DVD mode. 34. A-B/GREEN To segment repeat (valid in DVD mode)/ select page in analog TV teletext mode/ Fast enter menu (not valid in digital TV, DVD and FM). 35. GOTO/RED To play from a certain time point(valid in DVD mode)/select page in analog TV teletext mode /fast enter menu(invalid in digital TV, DVD and FM)/To Start recording digital TV program: To hide recording Dialog. 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 POWER P.MODE 1 2 3 4 5 6 7 8 9 S.MODE CH+ 0 MUTE SLEEP EXIT TEXT MIX INDEX CALL RECALL SOURCE VOL+ I/II CANCEL REVEAL HOLD SIZE GOTO A-B REPEAT ANGLE DVD-MENU TITLE PBC AUDIO S.PAGE PAGE+ DISPLAY TV/RADIO EPG SUBTITLE ZOOMi 36. DVD-MENU/S.PAGE To go to the menu of DVD menu,valid in DVD mode/to go to the sub page of teletext, valid in analog TV mode. 37. TITLE/PAGE- To go to the menu of DVD menu, valid in DVD mode/ browse the previous page of teletext in analog TV mode. 38. DISPLAY To display track time in DVD mode/display information in digital TV mode 39. TV/RADIO/ZOOM- To switch between TV and radio modes, valid in digital TV mode /To zoom out to the picture valid in DVD mode. CH- VOL- PAGE- ZOOM+ FAV SCALER - 5 -
REMOTE CONTROL BATTERY INSTALLATION Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of the battery to the -/+ marks inside the battery compartment, as follows: BATTERY LIFE Normally, batteries can be used one year. If the remote control is still invalid when very near to the TV's remote sensor window, please use new batteries. Please use SUM-4(AAA) battery. NOTE Never use rechargeable battery. Never charge, short-circuit, disassemble and heat the battery, or throw it into fire. Pay attention not to fall or knock the remote controller, which will cause damage or function failure to it. Do not use new and old battery together. When not using the remote controller for a long time, please take out battery to avoid liquid leakage. Before replacing new battery, please clean the electrolyte in the remote controller. If electrolyte splashes into body, please clean it with water. CAUTION: Please put battery in the place children cannot touch. If swallow by accident, please contact with the local doctor immediately. - 6 -
LET'S START SWITCHING ON Press the [POWER] button on the remote control to make the unit switch to power-on mode - you will see the LED indicator turn green. Now you can enjoy the many features of your new TV. SELECT SOURCE OPERATION You can select input source by using source menu. Press [SOURCE] button to show the menu as follows: DTV ATV SCART COMPONENT DVD VGA HDMI USB CARD FM The current source item is highlighted. Through press [ / ] button on the remote control or [CH+/CH-] key on the left side of LCD TV to select your desire, press [ / ] button, or [OK] button, [VOL+/ VOL-] key on the side of LCD TV to confirm your choice. - 7 -
DTV MENU In TV mode, press [] button into the main menu and the main menu will show as follows: Through pressing [ / ] button on the remote control, you can select main menu sections (main menu sections consist of "PICTURE", "SOUND", " Channel", "DTV Setup", "Function"). Press [ ] or [OK] button to enter this menu section. Press [ / ] button on the remote control to select the item, and then press [ / ] button to adjust parameter value. Press [] button to return to main menu sections. PICTURE Select PICTURE item to adjust picture parameters. You may select Picture Mode, color temperature and adjust Contrast, Brightness, Colour, Sharpness, Tint. Mode u Picture mode item can be changed between User, Standard, Soft, Dynamic. Color Temperature mode item can be changed between Cool, Medium and Warm. You may adjust Brightness, Contrast, Colour, Sharpness, Tint for User mode. SOUND Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance, and Auto Volume. - 8 -
DTV MENU Aute Volume Off Sound Mode item can be changed between Standard, Music, Film, Sports and User. Auto Volume item enables to adjust off or on for control volume automatic. Treble and Bass items can be adjusted from 0 to 100 Balance item can be adjusted from -50 to +50 for L and R sound balance. Default is 0. CHANNEL Select DTV Channel item to setting DTV channels. You may select Auto Tuning, Manual Tuning, Program Edit. Tuning Tuning Programme Auto Tuning item enables to adjust channel setting automatically. Select Auto Tuning item, press [ ] or [OK] button to enter Country selection menu. Press [ / ] button to select Country. Press [OK] button to start auto searching. - 9 -
DTV MENU DTV Manual Tuning item enables to change channel settings. List EXIT OK Program Edit item enables to enter submenu to set channel DELETE, MOVE, SKIP and FAV. List EXIT OK - 10 -
DTV MENU Select DTV Setup item to setup lock, select audio language and subtitle language, you may select time zone and display CI information. Antenna Power Off Lock item enable to lock the auto tuning, manual tuning, program edit and block program. If you want to change the lock system, you must enter default password: 0000 first. Audio Language item enables to adjust audio language. Primary Secondary English English PVR File System - 11 -
DTV MENU Subtitle language item enables to adjust subtitle language. Antenna Power Off Time item enables to enter sub menu. Clock Time Zone Daylight Stockholm GMT+1 Off Clock to adjust the real time. Time Zone to adjust the time zone. Daylight to adjust summer time off or on. CI Information item enables to read the SMART card information. - 12 -
DTV MENU FUNCTION Select FUNCTION item to adjust function parameters. You may select Language, Sleep Timer, Aspect Ratio, Noise Reduction, Blue Screen and Restore Setting. Language English Aspect Ratio 16:9 Noise Reduction Mid Sleep Timer Off Blue Screen On Country Poland Restore Factory Default Language item enables to select the OSD language. Aspect Ratio item can changed between Auto, ZOOM1, ZOOM2, 16:9, 14:9, 4:3. Noise Reduction item can select reduce noise mode: Off, Low, Middle, High. Sleep Timer item enables to set the sleep timer: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min and 240min. Blue Screen item can changed between On and Off. Restore Setting item enables to reset all values to default ELECTRONIC PROGRAM GUIDE (EPG) By pressing the EPG button on the remote control, an Electronic Program Guide is displayed. The EPG supplies information, such as program lists, start and end times of all available channels. In addition, the detailed information about the program is often available in t he EPG. (The availability and the amount of program details will vary depending on the broadcaster.) Programme Guide DTV 1 BBC ONE Wales 10 Mar 2009 14:50 10 Mar DTV 14:30 15:30 5 five. The Streets of San Francisco No Information 15 Ch15 No Information 16 QVC Gold Workshop With Jan Springer Funstamps 17 UK Gold No Information 23 bid -up.tv No Information 25 TCM No Information EXIT INFO DELETE SCHEDULE Reminder DATE OK INFORMATION To obtain more information about present and following events, you can press [ i ] button. Like previously, the following event is displays by pressing the [ / ] buttons (toggle between present and following events): Drama Bogas (JAV, 1996) 10:07 Wed, Aug 19 2009 10:00 12:05 English 576i No Program Information. - 13 -
ATV MENU This product can store up to 100-channel programs (0~ 99). You can select your favorite channel through pressing [CH+/-] or number buttons, and you can scan and store all of the channels through manual or automatic mode. In ATV mode, press [] button into the main menu and the main menu will show as follows: Through pressing [ / ] button on the remote control, you can select main menu sections (main menu sections consist of "PICTURE", "SOUND", "Channel", "Function"). Press [ ] or [OK] button to enter this menu section. Press [ / ] button on the remote control to select the item, and then press [ / ] button to adjust parameter value. Press [] button to return to main menu sections. PICTURE Select PICTURE item to adjust picture parameters. You may adjust Picture Mode, Contrast, Brightness, Colour, Sharpness, Tint and Colour Temperature. Picture Mode item can be changed between User, Standard, Mild, Dynamic. You may adjust Brightness, Contrast, Colour, Sharpness, Tint for user mode. NOTES You can't adjust TINT while watching TV channels. Colour Temperature item can select colour temperature mode: Medium, Warm and Cool. SOUND Picture Mode Standard Brightness 50 Contrast 50 Colour 50 Sharpness 50 Tint 0 Colour Temp Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance and Auto Volume. Medium Sound Mode Standard Treble 50 Bass 50 Balance 0 Auto Volume Off - 14 -
ATV MENU Sound Mode item can be changed between Standard, Music, Film, Sports and User. Auto Volume item enables to adjust off or on for control volume automatic. Treble and Bass items can be adjusted from 0 to 100 Balance item can be adjusted from -50 to +50 for L and R sound balance. Default is 0. Channel Channel 1 Fine Tune 192.25 MHz Colour System AUTO Audio System BG Manual Tuning Auto Tuning Programme Edit Channel Select ATV Channel item to adjust channels. You may select Channel, Colour System, Audio System, Fine-Tune, Manual Tuning, Auto Tuning and Program Edit. Channel item enables to change the channel number. Audio System item enables to select sound system "B/G","DK","I" and "L". Fine-Tune item enables to adjust the channel frequency accurately to make the sound and picture effect better (or set channel frequency directly with member buttons). Manual Tuning item enables to change channel settings. ATV Manual Tuning Storage To 1 Current CH 1 Search Fine-Tune Frequency 192.25 Mhz EXIT SAVE Auto Tuning item enables to channel setting automatically. Select the Auto Tuning item, then press [ ] or [OK] button to start auto searching. Channel Tuning 0 %... 46.25 MHz ATV ATV : 0 Programme(s) EXIT - 15 -
ATV MENU Program Edit item enables to enter submenu to set channel DELETE, RENAME, MOVE, SKIP, FAV. Programme Edit TV 1 C-02 TV 2 C-11 DELETE RENAME MOVE SKIP FAV Press RED button to delete channel. Press GREEN button to rename channel. Press YELLOW button to move channel. Press CYAN button to SKIP channel. Press FAV button to set favourite channel. FUNCTION Select FUNCTION item to adjust function parameters. You may select Language, Aspect Ratio, Noise Reduction, Sleep Timer, Blue Screen, Country and Restore Setting. Language English Aspect Ratio 16:9 Noise Reduction Mid Sleep Timer Off Blue Screen On Country Poland Restore Factory Default Language item enables to select the OSD Sleep Timer item enables to set the sleep timer (Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min and 240min). Aspect Ratio item can c hanged between Auto, ZO OM1, ZOOM 2, 16:9, 14:9, 4:3. Auto, 14:9, ZOOM1, ZOO M2 not valid for VGA mode. Blue Screen item can changed between On and Off. Restore Setting item enables to reset all values to default. Noise Reduction item can change between Low, Mid, High and Off. - 16 -
TELETEXT FUNCTION TELETEXT FUNCTION Most TV stations provide cost-free teletext information, including the latest news, weather information, TV program list and stock information etc. You just input the needed teletext page according to the teletext content. TELETEXT DISPLAY Select the channel with teletext signal; Press [TEXT] button; Select corresponding page according to the colorized buttons on the remote control; Press [TEXT] again and TV screen will display. PAGE SELECTION You can input 3 digital numbers to enter the page you want to watch through number buttons. If the inputted number is invalid, you need to input correct 3 digital numbers again after you finished inputting this digital numbers. You can select to turn pages forward or backward through [CH+/-], [PAGE-/PAGE+] or [ / ] button. MIX MODE This function may let you enjoy TV and teletext information at the same time. When a certain teletext page displays, press [MIX] button, TV and teletext information will display on screen at the same time. Press [MIX] button again and only teletext image displays. In mix mode, the disturbance lines on teletext characters are easy to appear, so you are not recommended to select this mode. Note: Press [CANCEL] button to cancel teletext. LOCK You can press [HOLD] button to lock teletext page. Press this button again to cancel locking. INDEX Pressing [INDEX] button to display content page. Enter a certain teletext page through inputting number buttons. ZOOM IN TELETEXT When teletext page shows, you may double zoom in to display this teletext page; Press [SIZE] button to zoom in the upper half part of teletext page; Press [SIZE] button again to enter the under half part of teletext page; Press this button once more to return to original display mode. DISPLAY MODE Press [REVEAL] button to display the hidden teletext information. Press this button again to cancel. COLORIZED BUTTONS (RED, GREEN, YELLOW, BLUE) Select the corresponding teletext page through colorized buttons. - 17 -
SCART/AV/S-VIDEO/HDMI/USB MENU VIDEO SETTING MENU The menu setup of SCART/ S-VIDEO/ HDMI modes is the same as that of TV mode, except the section. You can find it in preceding pages. NOTE If no signal input in DTV, ATV, SCART/ AV / S-VIDEO/ HDMI, the screen will show as below. This unit will switch to standby mode automatically if no signal input more than 5 minutes. SCART No Signal 4:31-18 -
VGA MENU The VGA mode supported up to 1680X1050@75Hz (for 22"), you can use this unit as a multimedia PC monitor. When this unit works in VGA mode, the following setup can be done. Press [] button to enter main section. Press [ / ] button to select sections and then press [ ] button or [OK] button to enter. If all is done, please press [] button twice to exit and your setup data will be saved automatically. VGA Setup Select VGA Setup item to adjust such parameters as Horizontal Pos., Vertical Pos., Size, Phase, Auto Adjust. NOTE When your PC goes into standby mode, the screen will show as bellow. This unit will go into sleep mode if no signal input in 5 minutes. In this mode, the indicator will remains green, and the screen will turn off. You can wake it up by waking up your PC or pressing [] or [SOURCE] button on the remote control. VGA No Signal SOUND 4:31 Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance and Auto Volume. Auto Volume Off - 19 -
VGA MENU Sound Mode item can be changed between Standard, Music, Film, Sports, User. Auto Volume item enables to adjust Off or On for control volume automatic. Treble and Bass items can be adjusted from 0 to 100. Balance item can be adjusted from -50 to +50 for L and R sound balance. Default is 0. PICTURE Select PICTURE item to adjust such parameters as Colour Temperature, Red, Green, Blue. Colour Temperature item can be set to: Medium, Warm and Cool. Red, Green and Blue items enables to adjust RGB value of colour temperature. NOTE The picture will be displayed incorrectly while adjusting. FUNCTION Select FUNCTION item to adjust function parameters. You may select Language, Sleep Timer, Aspect Ratio, Blue Screen and Restore Setting. Language English Aspect Ratio 16:9 Noise Reduction Mid Sleep Timer Off Blue Screen On Country Poland Restore Factory Default Language item enables to select the OSD language. Sleep Timer item enables to set the sleep timer: Off, 10min, 20min, 30min, 60min, 120min,180min and 240min. Aspect Ratio item can be changed. Blue Screen item can changed between On and Off. Restore Setting item enables to reset all values to default. - 20 -
FM MENU OPERATION FM SETTING Connect FM antenna with FM terminal on the left side of analog TV, change source to FM. Press button and a menu will show as follows: FM SETTING Channel 255 Frequency 377.97MHz Manual Tuning Auto Tuning Channel preset enables you to display current channel number, press [ / ] button to change channel. When highlighted you can either enter the frequency with the numerical buttons or by pressing cursor left/right. Press OK to save. Manual Tuning enables you to decrease frequency and press SAVE button to increase frequency. When a program is found, manual search will stop, press OK button to save the new channel. Auto Tuning item enables you to search and store all the channels in FM band 87.5-108MHz. Move the cursor to auto search, then press or button to begin auto search. Press button to cancel auto search. NOTES Up to 40 programs can be preseted/stored, and you can select them in 2 ways: Method 1: For programs 1.2.3 and 4, press the 1. 2. 3 and 4 button and wait for 3 seconds to access to them. For programs 5-40, press the number buttons to access to them directly. Method 2: Press CH- button to decrease channel and press CH+ button to increase channel. During scanning, you can press button to stop it. If without any operation in 5 minute, the panel will turn off automatically. In saving power mode, any operation can turn on the panel. - 21 -
FM MENU OPERATION SOUND Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance, Auto Volume and Surround Sound. Sound Mode item can be changed between User, Sports, Music, Film. Auto volume- Allows you open or close auto volume adjustment SOUND Film Auto Volume Off FUNCTION Select FUNCTION item to adjust function parameters. You may select Language, Sleep Timer and Restore factory default Noise reduction Language item enables to select the OSD language. Sleep Timer item enables to set the sleep timer (Off, 10min, 20min, 30min, 60min, 120min, 180min and 240min) Restore factory default - Allows you to reset all TV settings back to the default settings. Language Blue Screen Country Restore Factory Default English 16:9 Mid off off Sweden - 22 -
USB OPERATION BRIEF INTRODUCTION This product has a USB 2.0 interface; you can play music, movie and picture files from USB equipment. USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0. There are some types USB 1.1 devices: Monitors Communication devices, Audio, Human Input Device (HID), Mass storage, Most flash memory, USB HDD etc. Belongs to Mass Storage Class. Mass Storage Class includes 2 transport manners: 1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport 2. USB 1.1 Mass Storage Class Bulk-Only Transport. This unit supports USB 1.1 Mass Storage Class Bulk-Only Transport, we are not sure that other USB devices can be supported! So please find out about the features of USB equipments before using it. - 23 -
USB OPERATION PLAYBACK Press [SOURCE] button to select USB source and insert USB equipment, the USB operation menu appears on screen as below. \SUBTITLE\ 1. Avi Size: 4240K Bytes EXIT EXIT OK ENTER SELECT 1: State window Display the current playing mode. 2: DIR window Display the path. 3: File window Display the current path's file. 4: Preview window Movie playing or image preview window. 5: Information window Display the current files information. Press [ / ] to select playing mode and press [OK] button to enter. Thus current playing mode is highlighted. item description Music mode Movie mode Photo mode - 24 -