EN SE. Oil mist filter Filter för oljedimma. User manual. Bruksanvisning

Relevanta dokument
MCP-16RC, Air Purification

Slangupprullare Hose reels

Users manual Bruksanvisning Gebrauchanweisung Guide d instructions

GOLD SD Med styrenhet/with control unit. Fläkt/ Fan. Utan filter/ Without filter. Fläkt/Fan. Fläkt/ Fan. Med filter/ With filter.

Slangupprullare. Hose Reels

GOLD SD Fläkt 2/ Fan 2. Fläkt 1/ Fan 1. Fläkt/ Fan. Utan filter/ Without filter. Fläkt 1/ Fan 1. Fläkt 2/ Fan 2. Med filter/ With filter Filter

Instruction Manual. Svenska, English. Power Bank. Model: PRBN

MONTERINGSINSTRUKTION ASSEMBLY INSTRUCTION

Nathi Skötbord Changing unit Table à langer murale Wickeltisch Verschoontafel Puslebord Cambiador de pared Přebalovací pult Fasciatoio

PRESS FÄLLKONSTRUKTION FOLDING INSTRUCTIONS

Plain A262. För T16 (T5) lysrör. Innehåll. Monteringsanvisning. A. Instruktion för rampmontering

(EN) Technical description

GOLD SD Med styrenhet/with control unit. Fläkt 1A/B/ Fan 1A/B. Fläkt 2A/B/ Fan 2A/B. Fläkt/ Fan. Utan filter/ Without filter

Monteringsanvisning Installation instructions

Contents / Innehållsförteckning

7!34% 7!34% !34% 52-53,/

Monteringsanvisning Podie T 4100 K


SUZUKI GRAND VITARA 3P CITY 2011»

Monteringsanvisning Nödutrymningsbeslag ASSA 179E

Assembly instruction Kit 200

DAMPER EQAZ-12, EQAZ-13, STAZ-30, STBZ-30

BenchTop Utsugsarm FX2 75 CHEM

FilterMax F. Modular dust collector with integrated pre-separator

Får endast utföras av behörig personal. May only be carried out by authorized electrician

Ersättning styrkort GOLD, stl 1-3, Version 1-3/ Replacement control circuit board GOLD, sizes 1-3, Version 1-3


GOLD SD 60. Med styrenhet/with control unit. Fläkt 2/ Fan 2. Fläkt 1/ Fan 1. Fläkt/ Fan. Utan filter/ Without filter. Fläkt 1/ Fan 1.

Z-LYFTEN PRODUKTION AB MONTERINGSANVISNING INSTALLATION INSTRUCTIONS

VASSVIK FIXED STAND SE / ENG

Fiat » Fiat Panda / 4x4 2003» Fiat Panda 4x4 Climbing / 4x4 Cross 20033»

Bruksanvisning Directions for use

GOLD SD 100, eff.var./cap.var. 2

Z-LYFTEN PRODUKTION AB MONTERINGSANVISNING INSTALLATION INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

LINC MODELL 13. INR SVERIGE AB Kosterögatan 15 SE Malmö 13 EN 1428:2005+A1:2008

SE/GB.ELSD5060E

PRESS FÄLLKONSTRUKTION FOLDING INSTRUCTIONS

ARC 32. Tvättställsblandare/Basin Mixer. inr.se

SAFETY PRECAUTIONS SPECIFICATIONS

Montageanvisning Airway system 1000/1500 Assembly instruction Airway system 1000/1500

MONTERINGSINSTRUKTION ASSEMBLY INSTRUCTION

FMC patronfilter. Compact cartridge filter for solving dust problems within a wide range of industries

GOLD SD eff.var./cap.var.120-1

GOLD SD Med styrenhet/with control unit. Fläkt 1A/B/ Fan 1A/B. Fläkt 2A/B/ Fan 2A/B. Fläkt/ Fan. Utan filter/ Without filter

INSTALLATION INSTRUCTIONS

GOLD SD/CX 120, eff.var./cap.var. 2

säkerhetsutrustning / SAFETY EQUIPMENT

CompactAIR Center Ventilation - Filtrering - Uppvärmning CompactAIR Center Ventilation - Filtration - Heating

R min. 5 max

Anvisning för Guide for

Technical description with installation and maintenance instructions

LINC Modell A

Monteringsanvisning benfundament TM 9060, TM 9070, T 9153 E/K/VP. Art nr , ,

Montageanvisning Airway system 1000/1500 Assembly instruction Airway system 1000/1500

GOLD SD 40/50, eff.var./cap.var. 2

VARIOBARRIER S/M MIMSAFE BY CHOICE

Z-LYFTEN PRODUKTION AB MONTERINGSANVISNING INSTALLATION INSTRUCTIONS

GOLD SD 100, eff.var./cap.var. 2

Monteringsanvisning benfundament TM 8055, TM 8060, T 8118 K. Art nr ,

GOLD SD Med styrenhet/with control unit. Fläkt/ Fan. Utan filter/ Without filter. Fläkt/Fan. Fläkt/ Fan. Med filter/ With filter

GigaCom AB Säterigatan Göteborg

SAFETY PRECAUTIONS SPECIFICATIONS

Discovery FSQ, IAA Utgåva/Edition 11. SE Habo. Klass 2 IAA FSQ-I 26W. 4 mm c c mm N L

Windlass Control Panel v1.0.1

Installation. Twice Nisch. Twice Corner SVENSKA ENGLISH

Quick Start Guide Snabbguide

IMPORTANT! RETAIN FOR FUTURE REFERENCE PLEASE READ CAREFULLY VIKTIGT! BEHÅLL FÖR FRAMTIDA REFERENS LÄS IGENOM INSTRUKTIONSMANUALEN

GOLD SD Med styrenhet/with control unit. Fläkt/ Fan. Utan filter/ Without filter. Fläkt/Fan. Fläkt/ Fan. Med filter/ With filter.

Diskant Yta eller Vikelfäste montering Mount

GOLD SD/CX 120, eff.var./cap.var. 1

INKOPPLINGSANVISNING ELTRYCKSLÅS WIRING DIAGRAM SOLENOID LOCK

Med styrenhet (i undre plan)/with control unit (in lower level) Säkerhetsbrytare/ huvudströmbrytare/ Safety switch/ main switch

THISAB Monteringsanvisningar till Brand- och spolposter

P650 - Takscreen. Installationsguide EN

Storlek/ Size. Modell/ Model. Effekt/ Effect. Vattenmängd/ Water amount T30 63W T30 87W T30 67W T30 76W T30 108W T30 121W

Accepterad monteringsanvisning 2016:1. Ecos M CoolStart (RSK: ) Ecos L CoolStart (RSK: ) 1 (12)

AirCare - Bakteriekontroll i offentliga utrymmen

Accepterad monteringsanvisning 2016:1. Talis S (RSK: ) Talis S (RSK: ) 1 (12)

Accepterad monteringsanvisning 2016:1

FilterMax DF. Modular dust multi purpose collector

Accepterad monteringsanvisning 2016:1. Talis S (RSK: ) Talis S 100 CoolStart (RSK: )

Magic Grippers System för att enkelt bygga robotgrippers / grippers. -- Kort presentation -- Beställ komplett katalog

IRAB Mottagare sida 2-5 Tele Radio AB Mottagare sida 6

SE/GB.ELSD5060E

Företagsnamn: Grundfos Skapad av: Magnus Johansson Tel: +46(0) Datum:

Industrial valves 4 5

Accepterad monteringsanvisning 2016:1. Metris (RSK: ) Metris S (RSK: ) Metris (RSK: )

nwind and nwind-race transducer Twin Fin Installation Manual English Installationsmanual Svensk

InstalationGuide. English. MODEL:150NHighGain/30NMiniUSBAdapter

Congratulations on purchasing an ATS towbar. Gratulationer till er nyinköpta ATS dragkrok

TYLÖ SAUNA HARMONY PRO

Your No. 1 Workout. MANUAL pro

GOLD SD 100, eff.var./cap.var. 1

ASSEMBLY INSTRUCTIONS SCALE - SYSTEM

Reservdelskatalog Parts Catalogue COMBI 40 AE /S15 - Season 2017

Information technology Open Document Format for Office Applications (OpenDocument) v1.0 (ISO/IEC 26300:2006, IDT) SWEDISH STANDARDS INSTITUTE

Installation Instructions

SVENSK STANDARD SS-EN ISO 19108:2005/AC:2015

Fig. 2: Inkoppling av lindningarna / Winding wiring diagram

Transkript:

EN SE Oil mist filter Filter för oljedimma mistwizard EN SE User manual Bruksanvisning www.plymovent.com

English Page MistWizard MW-2 2 Spare parts 10 svenska MistWizard MW-2 11 Reservdelar 10 181113/0 MistWizard 1

TEChNiCAl DESCriPTioN Date: 10-09-24 Product no: MW-2 mistwizard: mw- Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced, handed over, copied, xeroxed or translated into another language in any form or means without written permission from Plymovent AB. Plymovent AB reserves the right to make design changes. Mist Wizard To AChiEvE optimum function AND SAfETy, PlEASE read ThiS MANUAl BEforE USiNG your filter. Plymovent MW-filter is specially designed to handle oilmist from both emulsions and straight cutting fluids. The filter has a unique combination of different filtration methods. The captured oilmist passes a rotation-filter stage where most of the mist condenses and is collected in the filter's separation chamber. The next step is the main filter where the smallest particles of oilmist and fumes are separated. Advantages High efficiency rotation filtration. Quick replacement of filters without tools. Simple installation. Compact design. Flexible installation possibilty. Minimum of maintenace. Delivery filter cabinet complete with filter media and pressure guage manometer. Accessories has to be ordered separately. The inlet/outlet connection are Ø 6,3"/160mm. General it is forbidden to use the filter in an explosive environment. an oil mist filter must never be used for gases or aerosols with a temperature higher than 194 f/ +90 c. filter unit product no Weight filter area inlet/outlet typical air volume max air volume Mistwizard MW-2 29lb/13kg 107,6ft²/10m² 6,3 / 160mm 294cfm/500m³h accessories Wall bracket MW-W 3,7lb/1,7kg fan Kit MW-fAN-KiT 3,3lb/1,5kg inlet with drain MW-iNl 1,8lb/0,8kg 6,3 / 160mm variable outlet MW-oUT 0,22lb/0,1kg 6,3 / 160mm Stand MW-STA 4,2lb/1,9kg PA- Adapter MW-ADA 6,6lb/3,0kg Stanchion 1100mm PA-110 37lb/17kg Stanchion 2200mm PA-220 55lb/25kg y- connection MW-y 100 2,4lb/1,1kg 4"/100mm y- connection MW-y 125 3,1lb/1,4kg 5"/125mm suitable fans noise level 3 phase fua-1300 26,5lb/12,6kg <70dB(A) 6,3 / 160mm 1 phase fua-1301 28,6lb/13,2kg <70dB(A) 6,3 / 160mm filter media max air volume initial pressure drop max pressure drop oleofob -2 CArT 2 ole 7,5lb/3,4kg 107,6ft²/10m² 588cfm/1000m³/h 0,6"wg/150Pa 0,4"wg/1000Pa 181113/0 MistWizard EN - 2

model: mw-2 dimensional data model: mw-2 with fua-1300 C H mm inches A 542 21 11/32 B 642 25 13/32 C 428 16 27/32 G D 390 15 13/32 E 597 23 17/32 E I B f 442 17 13/32 G 165 6 1/2 h 159 6 1/4 i 10.5 13/32 J 572 22 1/5 H D K 1070 42 1/8 l 695 27 1/4 F M 45 1 25/32 A NoTE! if the filter unit with fan or without shall be connected to external duct system on filtrated air side a flexible connection is needed between the unit and duct system. MW-2: l= 600mm. Safety information: Design and function Before replacing the filter cartridge always switch off the power to the fan. (see separate information: filter maintenance) 2. Be careful when lifting and turning away fan from the filter unit. 3. When replacing the filters, always use protective gloves and mask. The collected oilmist may be dangerous to your health. 4. The filter must never be opened during operation. 5. All electrical maintenance must be carried out by an authorized electrician. Plymovent Mist Wizard filter is a highly effective mechanical filter for filtration of oil mist. The unique design removes the oil mist in two stages. These are incorporated in order to maximize their effectiveness. The collected liquids can be re-used or disposed. filtration: Polluted air (a) leads in the inlet, duct or hose and passes an air rotation separation stage (b) where separation of solid oil takes place by centrifugal force. The main filter (c) separates the remaining oil particles from the air-stream (d). d c d a b a MistWizard/ENG/USA/CAN/3/11 181113/0 MistWizard EN - 3

MistWizard OPTIONS and ACCESSORIES Extraction fan Description Type Specification Art. no. Extraction fan with radial impeller. Speed of revolutions: 2800 rpm. Outlet: Ø 160 mm. FUA-1300 (215) 230V/1ph/50Hz 0000100300 FUA-1300 (435) 230-400V/3ph/50Hz 0000100302 Mounting bracket Wall mouting bracket for MistWizard. MB-MW/W 0000100777 Fan kit Fan mounting kit. To be used with FUA- 1300. MW-FAN-KIT 0000100778 Stand Stand for elevated machine mounting. Stand elevation 150 mm. MB-MW/S1 0000100779 Stanchion mounting bracket PA Stanchion mounting bracket. PA-110 and PA-220 to be ordered separately. MB-MW/S2 0000100780 Stanchion Stanchion for ceiling, wall, floor or PA-110 1,1 m 0000101231 PA-110 bench mounting of a MistWizard. MB-MW/S2 to be ordered separately. PA-220 2,2 m 0000101234 PA-220 Inlet Inlet for 160 mm duct connection. Includes drain loop kit and mounting screws. MW-INLET 0000100781 Outlet 360 adjustable outlet diffuser 45 angle discharge. Outlet size Ø 160 mm. MW-OUTLET 0000100782 Filter wrapper Oil coalescer filter wrapper for MW-2. MW-WRAP/2 0000100293 181113/0 MistWizard EN - 4

MoUNTiNG instruction Date: 10-09-24 Product no: MW-2 mist Wizard Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced, handed over, copied, xeroxed or translated into another language in any form or means without written permission from Plymovent AB. Plymovent AB reserves the right to make design changes. Direct mounting to machine: To enter the machine () a Ø165 opening is needed. filter stand MW-STA (2.) can be used (accessory). note! if the filter unit shall be connected to an external duct system on filtrated air side a flexible connection is needed between the unit and duct system to allow easy filter access. 2. Wall mounting of filter: MW-W MB-MW/S1 Applicate brackets (1) to the filter unit by supplied hardwear (2), Note! M8x25 on fan bracket side. hole pattern for wall mounting. 2. 165mm/605" 440mm/17,32" 181113/0 MistWizard EN - 5

To applicate inlet with drain: MW-iNl Applicate inlet with drain (1) using supplied detailes. MW-INLET To applicate adjustable fan outlet: MW-oUT MW-OUTLET Applicate adjustable outlet () using supplied detailes. 181113/0 MistWizard EN - 6

To mount fan direct on filter unit: MW-fAN-KiT Applicate the bracket (1) to the fan motor, applicate the bracket (2) to the filter unit. Applicate the tube (3) in to the bracket (2). Put the fan on top of the filter unit and bolt tubing (3) to bracket (1). Note! Bracket (1) universal for iec and NEMA motors. Note! When connected to an external ductwork, always use a hose connection or other quick coupling between fan outlet and ducting to allow easy filter access. 3. 2. 181113/0 MistWizard EN - 7

MW-fAN-KiT 2. fan: fua-1300, 1301 3. CArT ole: Cartridge, oleofob. 4. Manometer. 5. MW-W: MB-MW/S1: Wall wall mounting bracket. bracket location for plastic spigot when using fan. 2. 3. 4. 5. location for plastic spigot without fan. MistWizard/ENG/USA/CAN/8/11 181113/0 MistWizard EN - 8

MAiNTENANCE instruction Date: 10-09-24 Product no: MW-2 mist Wizard Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced, handed over, copied, xeroxed or translated into another language in any form or means without written permission from Plymovent AB. Plymovent AB reserves the right to make design changes. Pressure drop check 10 4 5 2 6 15 0 0 8 20 Bad filtration or low airflow, check differential pressure manometer. if the value is 1000Pa/ 4"wg or higher it is neccesary to wash or replace filter cartridge. Washing filter cartridge/ replacing filter cartrige Main filter lift and turn fan (A) to the side (unit with fan), unlock the filter cartridge lock (B). To detach the filter cartridge (C) lift upwards. 2. Put the filter cartridge (C) to side. 3. re-assemble the filter carefully - avoid touching the filter media (D), check the sealing (E). E C A D B WhEN replacing or WAShiNG ThE filter, AlWAyS USE ProTECTivE GlovES AND MASK. 181113/0 MistWizard EN - 9

SPArE PArT DrAWiNG Date: 10-09-24 Product no: MW-2 mist Wizard Copyright 2008: All rights reserved. All information within this printed matter may not be reproduced, handed over, copied, xeroxed or translated into another language in any form or means without written permission from Plymovent AB. Plymovent AB reserves the right to make design changes. 6. 2. 3. 5. 4. Produkt No: Decription A All models All models of MW B MW-1 C MW-2 Abreviations X = Order as requiered, state requiered length. Pos Art. No: A B C D E F G Description Note 1 962 787 1 Clamp ring 2 6160-1011 1 CART-1-OLE incl Pre-filter 6170-1011 1 CART-2-OLE incl Pre-filter 3 994 103 1 Manometer incl. hose connections from 03181 7773-1011 1 Complete manometer kit from 03181 4 505 826 1 Inlet Ø157mm/6,2" 5 985 945 X Hose for manometers 8mm/0,31" 6 6125-1011 1 WRAP-2 Prefilter for CART-2-OLE 181113/0 MistWizard EN - 10

TeKnISK beskrivning Date: 10-09-24 Product no: MW-2 MistWizard copyright 2008: all rights reserved. all information within this printed matter may not be reproduced, handed over, copied, xeroxed or translated into another language in any form or means without written permission from Plymovent ab. Plymovent ab reserves the right to make design changes. MistWizard Filter FöR att UPPnå optimal FUnKTIon och SäKeRheT SKaLL Denna ManUaL LäSaS noggrant Innan FILTReT TaS I bruk! Plymovent MistWizard Filter är anpassat för att filtrera oljedimma från emulsioner eller raka skäroljor. Filtret har en unik kombination av filtrering i olika steg. Den uppsamlade oljedimman passerar rotations filtreringen där det mesta av oljedimman kondenseras och avskiljs. nästa steg är huvudfiltret där de minsta partiklarna av oljedimman och stoft avskiljs. MistWizard Filtret finns i två olika storlekar vilket innebär stor flexibilitet av luftflöden. Fördelar Högeffektiv filtrering i flera steg. Enkelt att byta filter. Enkel att installera. Kompakt design Flexibla monteringsmöjligheter Minimalt underhåll. Leverans Filterenheten levereras med filtermedia, fläkt och differenstryckmätare. alla tillbehör måste beställas separat. Filtrets in och utlopp är Ø160mm. allmänt Fitret får aldrig användas i explosiv miljö. Filtret får inte användas till Filter unit product no Weight Filter area Inlet/Outlet Typical air volume Max air volume Mistwizard MW-2 29lb/13kg 107,6ft²/10m² 6,3 / 160mm 294cfm/500m³h Accessories Wall bracket MW-W 3,7lb/1,7kg Fan Kit MW-Fan-KIT 3,3lb/1,5kg Inlet with drain MW-InL 1,8lb/0,8kg 6,3 / 160mm variable outlet MW-oUT 0,22lb/0,1kg 6,3 / 160mm Stand MW-STa 4,2lb/1,9kg Pa- adapter MW-aDa 6,6lb/3,0kg Stanchion 1100mm Pa-110 37lb/17kg Stanchion 2200mm Pa-220 55lb/25kg Y- connection MW-Y 100 2,4lb/1,1kg 4"/100mm Y- connection MW-Y 125 3,1lb/1,4kg 5"/125mm Suitable fans Noise level 3 phase FUa-1300 26,5lb/12,6kg <70db(a) 6,3 / 160mm 1 phase FUa-1301 28,6lb/13,2kg <70db(a) 6,3 / 160mm Filter media Max air volume Initial pressure drop Max pressure drop oleofob -2 cart 2 ole 7,5lb/3,4kg 107,6ft²/10m² 588cfm/1000m³/h 0,6"wg/150Pa 0,4"wg/1000Pa 181113/0 MistWizard SE - 11

Model: MW-2 DIMENSIONERINGSDATA Model: MW-2 with FUA-1300 C H mm inches a 542 21 11/32 b 642 25 13/32 c 428 16 27/32 G D 390 15 13/32 e 597 23 17/32 E I B F 442 17 13/32 g 165 6 1/2 h 159 6 1/4 I 10.5 13/32 J 572 22 1/5 H D K 1070 42 1/8 L 695 27 1/4 F M 45 1 25/32 A note! If the filter unit with fan or without shall be connected to external duct system on filtrated air side a flexible connection is needed between the unit and duct system. MW-2: L= 600mm. Säkerhets information: bryt alltid strömmen före byte av filterkassett eller rengöring av filter. ( se instruktion filterbyte ) 2. Iaktag försiktighet vid öppnande av filter och lyft av fläkt. 3. använd alltid skyddshandskar och andningsskydd vid byte eller rengöring av filter. Den uppsamlade oljedimman kan vara farlig för hälsan. 4. Filtert får aldrig öppnas under drift. 5. all elektrisk service skall göras av behörig elektriker. Uppbyggnad och funktion: Plymovent MistWizard Filter är ett högeffektivt mekaniskt oljedimfilter. en unik konstuktion renar oljedimma i två steg. Filtreringen sker i sådan ordning att effektiviteten i oljedimavskiljningen maximeras. Den uppsamlade oljedimman dräneras direkt ned i maskinen eller samlas upp. Den uppsamlade oljan kan återanvändas eller deponeras. Filtrering Förorenad luft ( A ) leds direkt in i inloppet eller via slang/kanaler till rotationsfiltreringen ( B ). Där avskiljs tunga och stora oljepartiklar. Luften leds vidare upp i steg två (C). Detta huvudfilter renar bort dom återstående oljepartiklarna ur den renade luften (D). D C D A B A MistWizard/eng/USa/can/3/11 181113/0 MistWizard SE - 12

181113/0 MistWizard SE - 13

MonTeRIngSanvISnIng Date: 10-09-24 Product no: MW-2 Mist Wizard Direktmontera på maskin copyright 2008: all rights reserved. all information within this printed matter may not be reproduced, handed over, copied, xeroxed or translated into another language in any form or means without written permission from Plymovent ab. Plymovent ab reserves the right to make design changes. Markera hål och hålbild för montage på maskin (1) och genomför håltagning, Ø165mm är lämpligt. Stativ MW-STa(2.) kan med fördel användas (tillbehör). OBS! om filter/ Fläkt skall monteras till frånluftkanal skall slang eller annan typ av snabbkoppling användas mellan filter/ fläkt och kanalsystem. 2. Filter placering på vägg: MW-W MB-MW/S1 Montera väggfästen (1) till filterenheten med medföljande fästelement (2), obs! M8x25 fläktfästesida. 2. hålbild för väggplacering. 165mm/605" 440mm/17,32" 181113/0 MistWizard SE - 14

Montering av inlopp med dränering: MW-InL Montera inloppet (1) med medlevererade detaljer. MW-INLET Montering av justerbart utlopp: MW-oUT MW-OUTLET Montera justerbara utloppet () med medlevererade detaljer. 181113/0 MistWizard SE - 15

Direktmontera fläkt på filtret: MW-Fan-KIT Montera fäste (1) till flätmotor, montera fäste (2) till filterhus. Montera rör (3) till fäste (2). Placera fläkten uppe på filterenheten och montera samman rör (3) och fäste (1). obs! Fäste (1) passar flera typer av motorer. obs! när utloppet skall anslutas till extern kanal måste slang eller annan typ av snabbkoppling monteras mellan kanal och fläktens utlopp. 3. 2. 181113/0 MistWizard SE - 16

MW-Fan: Fläkt kit. 2. FLäKT:FUa-1300, 1301 3. cart ole: Filterpatron oleofob. 4. Manometer. 5. MB-MW/S1: MW-W: väggmonteringsdetaljer. Placering av plaststos när fläkt skall monteras. 2. 3. 5. 4. Placering av plaststos när fläkt ej används. 181113/0 MistWizard SE - 17

SKöTSeLanvISnIng Date: 10-09-24 Product no: MW-2 Mist Wizard Differenstryck kontroll copyright 2008: all rights reserved. all information within this printed matter may not be reproduced, handed over, copied, xeroxed or translated into another language in any form or means without written permission from Plymovent ab. Plymovent ab reserves the right to make design changes. 10 4 5 2 6 15 0 0 8 20 Lågt flöde eller försämrad filtrering, kontrollera tryckmätaren. om mätaren visar 1000Pa eller mer måste filtret tvättas eller bytas. Tvättning/ byte av filter C huvudfilter Lyft upp och sväng undan fläkten (a), lås upp patronfilterlåset (b), lyft upp och ställ filtret (c) vid sidan. E 2. återmontera filtret i omvändordning (obs se till att inte skada tätningslisten (e) eller filtermediat (D). A D B vid byte eller TväTTnIng av FILTeR använd alltid andningsskydd och SKYDDShanDSKaR. 181113/0 MistWizard SE - 18

181113/0 MistWizard www.plymovent.com