ESI 45010...... EN DISHWASHER USER MANUAL 2 NO OPPVASKMASKIN BRUKSANVISNING 17 SV DISKMASKIN BRUKSANVISNING 33
2 www.electrolux.com CONTENTS 1. SAFETY INSTRUCTIONS.................................................. 3 2. PRODUCT DESCRIPTION................................................. 4 3. CONTROL PANEL....................................................... 5 4. PROGRAMMES......................................................... 6 5. OPTIONS.............................................................. 6 6. BEFORE FIRST USE...................................................... 7 7. DAILY USE............................................................. 9 8. HINTS AND TIPS....................................................... 11 9. CARE AND CLEANING................................................... 12 10. TROUBLESHOOTING.................................................... 13 11. TECHNICAL INFORMATION............................................... 15 12. ENVIRONMENT CONCERNS.............................................. 16 WE RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you ll get great results every time. Welcome to Electrolux. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www.electrolux.com Register your product for better service: www.electrolux.com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model, PNC, Serial Number. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice.
1. SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. ENGLISH 3 The water inlet hose has a safety valve and a sheath with an inner mains cable. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability. Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. Do not let children play with the appliance. Keep all packaging away from children. Keep all detergents away from children. Keep children and pets away from the appliance door when it is open. 1.2 Installation Remove all the packaging. Do not install or use a damaged appliance. Do not install or use the appliance where the temperature is less than 0 C. Obey the installation instruction supplied with the appliance. Make sure that the appliance is installed below and adjacent to safe structures. Water connection Make sure not to cause damage to the water hoses. Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. The first time you use the appliance, make sure that there is no leakage. WARNING! Dangerous voltage. If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the service to replace the water inlet hose. Electrical connection WARNING! Risk of fire and electrical shock. The appliance must be earthed. Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable. Contact the Service or an electrician to change a damaged mains cable. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. 1.3 Use This appliance is intended to be used in household and similar applications such as: Staff kitchen areas in shops, offices and other working environments
4 www.electrolux.com Farm houses By clients in hotels, motels and other residential type environments Bed and breakfast type environments. WARNING! Risk of injury. Do not change the specification of this appliance. Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. Do not keep the appliance door open without supervision to prevent to fall on it. Do not sit or stand on the open door. Dishwasher detergents are dangerous. Obey the safety instructions on the detergent packaging. Do not drink and play with the water in the appliance. Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. WARNING! Risk of electrical shock, fire or burns. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Do not use water spray and steam to clean the appliance. The appliance can release hot steam if you open the door while a programme operates. 1.4 Disposal WARNING! Risk of injury or suffocation. Disconnect the appliance from the mains supply. Cut off the mains cable and dispose of it. Remove the door catch to prevent children and pets to get closed in the appliance. 2. PRODUCT DESCRIPTION 1 2 11 10 9 8 7 6 5 4 3 1 Upper spray arm 2 Lower spray arm
ENGLISH 5 3 Filters 4 Rating plate 5 Salt container 6 Water hardness dial 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 3. CONTROL PANEL 1 2 3 5 4 A B C D E 1 On/off button 2 Indicators 3 Display Indicators Description Wash indicator. End indicator. Multitab indicator. 4 Delay button 6 5 Programme buttons 6 Function buttons Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme operates.
6 www.electrolux.com 4. PROGRAMMES Programme 1) Degree of soil Type of load Heavy soil Crockery, cutlery, pots and pans Normal soil Crockery and cutlery 2) Fresh soil Crockery and cutlery 3) Normal soil Crockery and cutlery Normal or light soil Delicate crockery and glassware Programme phases Prewash Wash 70 C Rinses Dry Prewash Wash 65 C Rinses Dry Wash 60 C Rinse Prewash Wash 50 C Rinses Dry Wash 45 C Rinses Dry Duration (min) 105-115 Energy (kwh) Water (l) 1.6-1.8 19-21 90-100 1.1-1.2 15-16 30 0.8 8 160-170 0.8-0.9 12-13 65-75 0.6-0.7 11-12 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values. 2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time. 3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes). Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate. 5. OPTIONS 5.1 Multitab option Activate this option only when you use the combi detergent tablets. This option deactivates the flow of rinse aid and salt. The related indicators are off. The programme duration can increase. Activating the multitab function Activate or deactivate the multitab function before the start of a programme. You cannot activate or deactivate this function while a programme operates.
ENGLISH 7 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to SETTING AND STARTING A PROGRAMME'. 3. Press and hold function buttons (D) and (E) at the same time until the multitab indicator comes on. The function stays on until you deactivate it. Press and hold function buttons (D) and (E) at the same time until the multitab indicator goes off. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Deactivate the multitab function. 2. Set the water softener to the highest level. 3. Make sure that the salt container and the rinse aid dispenser are full. 4. Start the shortest programme with a rinsing phase, without detergent and without dishes. 5. Adjust the water softener to the water hardness in your area. 6. Adjust the released quantity of rinse aid. 6. BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets. 6.1 Adjusting the water softener German degrees ( dh) Water hardness French degrees ( fh) mmol/l Clarke degrees If you use the combi detergent tablets, activate the multitab option. Water softener adjustment Manual Electronic 51-70 91-125 9.1-12.5 64-88 2 1) 10 43-50 76-90 7.6-9.0 53-63 2 1) 9 37-42 65-75 6.5-7.5 46-52 2 1) 8 29-36 51-64 5.1-6.4 36-45 2 1) 7 23-28 40-50 4.0-5.0 28-35 2 1) 6 19-22 33-39 3.3-3.9 23-27 2 1) 5 1) 15-18 26-32 2.6-3.2 18-22 1 4 11-14 19-25 1.9-2.5 13-17 1 3 4-10 7-18 0.7-1.8 5-12 1 2
8 www.electrolux.com German degrees ( dh) Water hardness French degrees ( fh) mmol/l Clarke degrees Water softener adjustment Manual Electronic < 4 < 7 < 0.7 < 5 1 2) 1 2) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to SET- TING AND STARTING A PRO- GRAMME. 2. Press and hold function buttons (B) and (C) at the same time until the programme indicators above function buttons (A), (B) and (C) start to flash. 3. Press function button (A). The programme indicators above function buttons (B) and (C) go off. The programme indicator above function button (A) continues to flash. The end indicator starts to flash. The number of flashes shows the current level of the water softener: E.g. 5 flashes + pause + 5 flashes = level 5. 4. Press function button (A) again and again to change the setting. Each time you press function button (A) you go to the next level. 5. Deactivate the appliance to confirm the setting.
ENGLISH 9 6.2 Filling the salt container 1. Turn the cap counterclockwise and open the salt container. 2. Put 1 litre of water in the salt container (only for the first time). 3. Fill the salt container with dishwasher salt. 4. Remove the salt around the opening of the salt container. 5. Turn the cap clockwise to close the salt container. CAUTION! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. 6.3 Filling the rinse aid dispenser A M AX 4 3 21 + - B C D 1. Press the release button (D) to open the lid (C). 2. Fill the rinse aid dispenser (A), no more than the mark 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the release button locks into position. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). 7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to SET- TING AND STARTING A PRO- GRAMME. If the salt indicator is on, fill the salt container. If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and the degree of soil.
10 www.electrolux.com 7.1 Using the detergent A B 20 30 M AX 4 3 2 1 + - C 7.2 Setting and starting a programme Setting mode The appliance must be in setting mode to accept some operations. The appliance is in setting mode when, after the activation: All the programme indicators are on and the display shows 3 horizontal status bars. If the control panel shows other conditions, press and hold function buttons (B) and (C) at the same time until the appliance is in setting mode. Starting a programme without delay start 1. Open the water tap. 2. To set a programme, keep the appliance door ajar. 3. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. 4. Press the button of the programme you want to set. The related programme indicator stays on while all the other programme indicators go off. The display shows 3 horizontal status bars. The wash indicator comes on. 5. Close the appliance door. The programme starts. 1. Press the release button (B) to open the lid (C). 2. Put the detergent in the compartment (A). 3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. 4. If you use detergent tablets, put the tablet in the compartment (A). 5. Close the lid. Make sure that the release button locks into position. The display shows 1 horizontal status bar. Starting a programme with delay start 1. Set the programme. 2. Press the delay button again and again until the display shows the delay time you want to set (from 1 to 9 hours). The delay time flashes in the display. 3. Close the appliance door. The countdown starts. The delay time comes on with fixed light and starts to decrease with steps of 1 hour. The wash indicator goes off. When the countdown is completed, the programme starts. The wash indicator comes on. The display shows 1 horizontal status bar. You can set a programme and the delay start also with the appliance door closed. In this condition, you have only 3 seconds after each setting before the appliance starts to operate. Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance continues from the point of interruption.
Cancelling the delay start When you cancel a delay start, the appliance goes back to setting mode. You have to set the programme again. Press and hold function buttons (B) and (C) at the same time until the display shows 3 horizontal status bar and all the programme indicators come on. Cancelling the programme Press and hold function buttons (B) and (C) at the same time until the display shows 3 horizontal status bars all the programme indicators come on. Make sure that there is detergent in the detergent dispenser before you start a new programme. ENGLISH 11 1. Press the on/off button to deactivate the appliance. 2. Close the water tap. Let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. First remove the items from the lower basket, then from the upper basket. There can be water on the sides and on the door of the appliance. Stainless steel becomes cool more quickly than the dishes. At the end of the programme When the programme is completed, the wash indicator and the display go off. The end indicator comes on. 8. HINTS AND TIPS 8.1 The water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions. It is important to set the right level of the water softener. This makes sure that the water softener uses the correct quantity of dishwasher salt and water. 8.2 Loading the baskets Refer to the supplied leaflet with examples of the load of the baskets. Only use the appliance to wash items that are dishwasher-safe. Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. Do not put in the appliance items that can absorb water (sponges, household cloths). Remove remaining food from the items. To remove easily remaining burned food, soak pots and pans in water before you put them in the appliance. Put hollow items (cups, glasses and pans) with the opening down. Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. Make sure that glasses do not touch other glasses. Put the small items in the cutlery basket. Put the light items in the upper basket. Make sure that they do not move. Make sure that the spray arms can move freely before you start a programme.
12 www.electrolux.com 8.3 Using salt, rinse aid and detergent Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance. The rinse aid helps, during the last rinsing phase, to dry the dishes without streaks and stains. Combi detergent tablets contain detergent, rinse aid and other added agents. Be sure that these tablets are applicable to the water hardness in your area. Refer to the instructions on the packaging of the products. Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use the tablets with long programmes. Do not use more than the correct quantity of detergent. Refer to the instructions on the detergent packaging. 8.4 Before starting a programme Make sure that: The filters are clean and correctly installed. The spray arms are not clogged. The position of the items in the baskets is correct. The programme is applicable for the type of load and for the degree of soil. The correct quantity of detergent is used. There is dishwasher salt and rinse aid (unless you use combi detergent tablets). The cap of the salt container is tight. 9. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 9.1 Cleaning the filters 1. Turn the filter (A) counterclockwise and remove it. C B A
ENGLISH 13 A1 2. To disassemble the filter (A), pull apart (A1) and (A2). 3. Remove the filter (B). 4. Wash the filters with water. 5. Put the filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C). A2 6. Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. 9.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents. 9.3 External cleaning Clean the appliance with a moist soft cloth. 10. TROUBLESHOOTING The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem. Alarm code The indicator of the set programme flashes continuously. The end indicator flashes 1 time intermittently. With some problems, different indicators flash continuously or intermittently at the same time to show an alarm code. Problem The appliance does not fill with water.
14 www.electrolux.com Alarm code The indicator of the set programme flashes continuously. The end indicator flashes 2 times intermittently. The indicator of the set programme flashes continuously. The end indicator flashes 3 times intermittently. WARNING! Deactivate the appliance before you do the checks. Problem You cannot activate the appliance. The programme does not start. The appliance does not fill with water. The appliance does not drain the water. The anti-flood device is on. After the checks are completed, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If other alarm codes appear, contact the Service. Problem The appliance does not drain the water. The anti-flood device is on. Possible solution Make sure that the mains plug is connected to the mains socket. Make sure that there is not a damaged fuse in the fuse box. Make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown. Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose is not clogged. Make sure that the inlet hose has no kinks or bends. Make sure that the sink spigot is not clogged. Make sure that the drain hose has no kinks or bends. Close the water tap and contact the Service. 10.1 If the washing and drying results are not satisfactory Whitish streaks or bluish layers on glasses and dishes The released quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. The quantity of detergent is too much.
ENGLISH 15 Stains and dry water drops on glasses and dishes The released quantity of rinse aid is not sufficient. Adjust the rinse aid selector to a higher position. The quality of the detergent can be the cause. Dishes are wet The programme is without a drying phase or with a low temperature drying phase. The rinse aid dispenser is empty. The quality of the rinse aid can be the cause. The quality of the combi detergent tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid together with the combi detergent tablets. Refer to HINTS AND TIPS for other possible causes. 10.2 Activating the rinse aid dispenser with the multitab option activated 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to SET- TING AND STARTING A PRO- GRAMME'. 2. Press and hold function buttons (B) and (C) at the same time until the programme indicators above function buttons (A), (B) and (C) start to flash. 3. Press function button (B). The programme indicators above function buttons (A) and (C) go off. The programme indicator above function button (B) continues to flash. The end indicator is off. 4. Press function button (B) to change the setting. The end indicator comes on. The rinse aid dispenser is active. 5. Deactivate the appliance to confirm the setting. 6. Adjust the released quantity of rinse aid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth (mm) 446 / 818-898 / 575 Electrical connection Refer to the rating plate. Voltage Frequency 220-240 V 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Water supply 1) Cold water or hot water2) max. 60 C Capacity Place settings 9 Power consumption Left-on mode 0.99 W Off-mode 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. 0.10 W
16 www.electrolux.com 12. ENVIRONMENT CONCERNS Recycle the materials with the symbol. Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
INNHOLD NORSK 17 1. SIKKERHETSANVISNINGER............................................... 18 2. PRODUKTBESKRIVELSE................................................. 20 3. BETJENINGSPANEL..................................................... 21 4. PROGRAMMER........................................................ 22 5. TILVALG.............................................................. 22 6. FØR FØRSTE GANGS BRUK.............................................. 23 7. DAGLIG BRUK......................................................... 25 8. RÅD OG TIPS.......................................................... 27 9. STELL OG RENGJØRING................................................. 28 10. FEILSØKING........................................................... 29 11. TEKNISKE DATA........................................................ 31 12. MILJØVERN........................................................... 32 VI TENKER PÅ DEG Takk for at du har kjøpt et produkt fra Electrolux. Du har valgt et produkt bygget på erfaring gjennom flere tiår. Genial og stilig, og den er designet med tanke på deg. Du kan være trygg på at du får gode resultater hver gang du bruker den. Velkommen til Electrolux. Gå inn på nettstedet vårt for å: Få råd om bruk, finne brosjyrer, feilsøking, serviceinformasjon: www.electrolux.com Registrere produktet ditt for å få bedre service: www.electrolux.com/productregistration Kjøpe tilbehør, forbruksvarer og originale reservedeler til produktet ditt: www.electrolux.com/shop KUNDESTØTTE OG SERVICE Vi anbefaler at du bruker originale reservedeler. Når du kontakter serviceavdelingen, må du sørge for å ha følgende data for hånden. Informasjonen finner du på typeskiltet. Modell, PNC (produktnummer), serienummer. Advarsel/Forsiktig - Sikkerhetsinformasjon. Generelle informasjoner og tips Miljøinformasjon Med forbehold om endringer.
18 www.electrolux.com 1. SIKKERHETSANVISNINGER Les instruksjonene nøye før montering og bruk av produktet. Produsenten er ikke ansvarlig for eventuelle skader som skyldes feilaktig montering og bruk. Oppbevar produktets bruksanvisning for fremtidig bruk. Vanninntaksslangen har en sikkerhetsventil og en dobbel mantel med en indre strømledning. 1.1 Sikkerhet for barn og sårbare personer ADVARSEL Fare for kvelning, skade og permanent uførhet. Ikke la personer eller barn, med reduserte fysiske eller mentale funksjoner eller manglende erfaring og kunnskap, bruke produktet. De trenger tilsyn eller de må få instruksjon om bruk av produktet, av en person som er ansvarlig for deres sikkerhet. Ikke la barn leke med produktet. Oppbevar all emballasje utilgjengelig for barn. Oppbevar all vaskemidler utilgjengelig for barn. Hold barn og kjæledyr borte fra produktet når døren er åpen. 1.2 Montering Fjern all emballasje. Ikke monter og bruk et skadet produkt. Ikke monter eller bruk produktet på steder der temperaturen er lavere enn 0 C. Følg monteringsinstruksjonene som følger med produktet. Sørg for at produktet er montert under og ved siden av stabile seksjoner. Vanntilkopling Sørg for at vannslangene ikke påføres skade. La vannet renne til det er rent, før du kopler produktet til nye rør, eller rør som ikke er brukt på lengre tid. Sørg for at det ikke oppstår lekkasje første gang du bruker produktet. ADVARSEL Farlig spenning. Hvis vanninntaksslangen er defekt, må du trekke støpselet ut øyeblikkelig. Kontakt kundeservice for å reparere vanninntaksslangen. Elektrisk tilkopling ADVARSEL Fare for brann og elektrisk støt. Produktet må være jordet. Kontroller at det er samsvar mellom den elektriske informasjonen på typeskiltet og strømforsyningen i huset. Hvis det ikke er det, må du kontakte en elektriker. Bruk alltid en korrekt montert, jordet stikkontakt. Ikke bruk doble stikkontakter eller skjøteledninger. Pass på at støpselet og strømkabelen ikke blir påført skade. Kontakt servicesenteret eller en elektriker for å bytte en ødelagt strømkabel. Ikke sett støpselet i stikkontakten før monteringen er fullført. Kontroller at det er tilgang til stikkontakten etter monteringen. Ikke trekk i strømkabelen når du kobler fra produktet. Trekk alltid i selve støpselet.
1.3 Bruk Dette produktet er kun ment for bruk i husholdninger og liknende (må godkjennes hos det lokale mattilsyn)som: Personalkjøkken i butikker, på kontorer og andre arbeidsmiljøer Gårdshus Av gjester på hoteller, moteller og andre boligtyper "Bed and breakfast"-miljøer. ADVARSEL Fare for personskade. Produktets spesifikasjoner må ikke endres. Plasser kniver og bestikk med skarpe kanter i bestikkurven med spissen ned eller i en horisontal posisjon. Ikke la produktets dør stå åpen, uten tilsyn, for å forhindre at noen snubler over den. Ikke sitt eller stå på den åpne døren. Oppvaskmidler er farlig. Følg sikkerhetsinstruksjonene på oppvaskmiddelpakken. Ikke drikk eller lek med vann i produktet. Ikke ta ut oppvasken fra produktet før oppvaskprogrammet er ferdig. Det kan være oppvaskmiddel på oppvasken. ADVARSEL Fare for elektrisk støt, brann og brannskader. Ikke legg brennbare produkter eller gjenstander som er fuktet med brennbare produkter inn i eller i nærheten av produktet. Ikke bruk spylevann eller damp til å rengjøre produktet. Produktet kan slippe ut varm damp, hvis du åpner døren mens et oppvaskprogram er i gang. 1.4 Avfallsbehandling ADVARSEL Fare for skade og kvelning. NORSK 19 Koble produktet fra strømmen. Kutt av strømkabelen og kast den. Fjern dørlåsen for å forhindre at barn og dyr stenger seg inne i produktet.
20 www.electrolux.com 2. PRODUKTBESKRIVELSE 1 2 11 10 9 8 7 6 5 4 3 1 Øvre spylearm 2 Nedre spylearm 3 Filtre 4 Typeskilt 5 Saltbeholder 6 Hjul for innstilling av vannhardhet 7 Skyllemiddelbeholder 8 Oppvaskmiddelbeholder 9 Bestikkurv 10 Nedre kurv 11 Øvre kurv
3. BETJENINGSPANEL 1 2 3 NORSK 21 5 4 A B C D E 1 På/av-knapp 2 Indikatorer 3 Display Indikatorer Beskrivelse Vaskeindikator. Indikator for programslutt. Multitab-indikator. 6 4 Tidsforvalg-knapp 5 Knapper for programvalg 6 Funksjonsknapper Saltindikator. Denne indikatoren er av når programmet er i bruk. Skyllemiddelindikator. Denne indikatoren er av når programmet er i bruk.