SVENSK STANDARD SS-ISO :2018

Transkript

1 SVENSK STANDARD SS-ISO :2018 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 1 Språk/Language: engelska/english ICS: ; Elektronisk djuridentifikation Avancerade transpondrar Del 3: Tillämpning (ISO :2018, IDT) Radiofrequency identification of animals Advanced transponders Part 3: Applications (ISO :2018, IDT)

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Den internationella standarden ISO :2018 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av ISO :2018. The International Standard ISO :2018 has the status of a Swedish Standard. This document contains the official version of ISO :2018. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Lantbruksmaskiner, SIS / TK 228. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

4

5 Contents Page Foreword...v Introduction...vi 1 Scope Normative references Terms and definitions Abbreviated terms Requirements General Transmission protocol AID reading access Single Access Memory (SAM) Data Dictionary Memory (DDM) Sensor Data field User_Data field Memory Data Structure Overview Data_Config field (Block #4) Structure Overview of the Data_Config field Overview of the configuration flag byte field Data_Config field (Block #4) General coding Overview Page 1 flag User_Block flag Data Format flag Sensor flag DDM flag Proprietary flag Additional Memory flag No SAM present ISO Pre Defined DFID RFU flag Page = 0 configuration Data_Config field DFID Coding Data_Config field Proprietary Coding Data_Config field DSFID Coding Data_Config field DDM Coding Sensor Block coding DFID Code Definition General DFID Item General Animal (SAM) DFID Item codes to RFU DDM General DDM SECTION HEADER DDM SECTION BODY: DDM FIELDs DDM SECTION BODY: DDM FIELD variable length concept Explanation and examples of the TLV concept (variable versus fixed length) Page 1 data access mode specification (DSFID)...18 Annex A (informative) ISO Concept state diagram...19 Annex B (informative) Examples of the Memory Structure...20 iii

6 Annex C (normative) DDM Dictionary...21 Annex D (informative) DDM: Complete example...25 Annex E (informative) TLV Coding Examples...27 Annex F (normative) Activate Sensor command...28 Annex G (normative) DFID Item 02 Canine visceral leishmaniasis and rabies vaccines...29 iv

7 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: iso/ foreword.html. This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 19, Agricultural electronics. A list of all parts in the ISO series can be found on the ISO website. v

8 Introduction This document specifies the applications of the radio frequency (RF) system for advanced transponders for animal identification. The technical concept of advanced transponders for animal identification described is based upon the principle of radio frequency identification (RFID) and is an extension of the standards ISO and ISO Apart from the transmission of the (unique) identification code of animals, this document (ISO ) defines the access mode, data format, data content and optional features of the transponder with extended memory capabilities. ISO consists of three parts. vi

9 Radiofrequency identification of animals Advanced transponders Part 3: Applications 1 Scope This document describes the information that is stored in the advanced transponder memory, its format and the procedures for accessing such information. This document defines two parts of memory: a) the fixed part (mandatory): 1) ISO data field; 2) Data_Config field; b) the user part (optional): 1) field of fixed allocation for defined data; 2) uses an Object Identifier for data field separation in order to have maximum flexibility for future requirements. 2 Normative references The following documents are referred to in the text in such way that some or all of their content constitutes requirements of this document. For dated references only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 11784, Radio frequency identification of animals Code structure ISO 11785:1996, Radio frequency identification of animals Technical concept ISO , Radiofrequency identification of animals Advanced transponders Part 1: Air interface ISO , Radiofrequency identification of animals Advanced transponders Part 2: Code and command structure 3 Terms and definitions For the purposes of this document, the following terms and conditions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: ISO Online browsing platform: available at obp IEC Electropedia: available at 1

10 3.1 object defined piece of data, definition, or specification which requires a name in order to identify use in an instance of communication i t s 3.2 object identifier OID value (distinguishable from all other such values) which is associated with a unique object 3.3 single access memory SAM section of the memory that has predefined data allocation 3.4 data dictionary memory DDM section of the memory, that contains information defined by object identifier 3.5 data format identifier DFID unique identifier with a unique set of fixed data items at fixed memory location, allowing fast data access 3.6 data storage format identifier DSFID code which indicates how the data is structured in the transponder memory according to ISO Abbreviated terms AID animal ID or Identification code: 64 bits of the identification telegram specified in ISO and ISO CRC cyclic redundancy check DDM data dictionary memory DFID data format identifier DSFID data storage format identifier FDX full duplex HDX half duplex LSB least significant bit MSB most significant bit NPA number of parturitions NOB number of blocks NOF number of fields NOP number of pages OID object identifier RA registration authority RFU reserved for future use SAM single access memory TLV type length value 2

11 5 Requirements 5.1 General This document is an extension of ISO and ISO 11785; it is complementary to ISO and ISO To access the additional data and keep the backwards compatibility with the ISO 11784, ISO and ISO , the reader may go through a transponder configuration detection process (see the concept state diagram in Annex A). a) The process starts with reading the AID according to ISO and ISO and analysing the data to detect if this is an advanced transponder (bit15 = 1). b) In the case of an advanced transponder, the reader shall read Data_Config field (Block #4) to access the transponder configuration details. c) The reader can read all the memory or just single fields/blocks. d) In cases where the transponder configuration is known before accessing the Data_Config field, specific user memory blocks can be directly accessed without reading the ISO or the transponder memory configuration block. Bit15 of the ISO frame shall be set to 1 indicating an advanced transponder. Bit16 of the ISO frame (additional data flag) shall be set to 1, indicating that the transponder contains additional data in the trailer bits. Only one block for sensor data is defined in ISO Page 0 (DFID) data format (defined in 7.1). If more than one block for sensor data is needed, use one of the following: the ISO Page > = 1 (DSFID) data format specification (defined in 7.3), a proprietary data format or a new DFID code. Independent of the memory access mode, the Data_Config field (Block #4) shall be present and coded in accordance with the specification described in this document. Two basic memory access modes are defined: Single Access Memory (SAM) mode (defined in 5.3); Data Dictionary Memory (DDM) mode (defined in 5.4). NOTE This allows applications with specific requirements (e.g. data and access speed), to configure the system and adjust to the application requirements. DFID codes are granted and controlled by ISO TC 23/SC 19. New DFID code requests shall be submitted to ISO TC 23/SC 19 for approval and release. RFU bits shall be set to 0. The future use of the RFU bits will be included in a future revision of this document. In a mixed population of ISO and ISO transponders, both transponder types shall be readable by an ISO reader. All transponders shall support ISO Advanced transponders shall always support ISO 11785, ISO and ISO Transponders compliant to ISO shall support the mandatory part of the memory and may support the optional functionality. 3