SVENSK STANDARD SS-EN 60357 Fastställd Utgåva Sida Ansvarig kommitté 2003-02-28 11 1 (1+176) SEK TK 34 Copyright SEK. Reproduction in any form without permission is prohibited. Belysningsmateriel Halogenglödlampor Tungsten halogen lamps (non-vehicle) Performance specifications Som svensk standard gäller europastandarden EN 60357:2003. Den svenska standarden innehåller den officiella engelska språkversionen av EN 60357:2003. Nationellt förord Europastandarden EN 60357:2003 *)**) består av: europastandardens ikraftsättningsdokument, utarbetat inom CENELEC IEC 60357, Third edition, 2002 - Tungsten halogen lamps (non-vehicle) - Performance specifications utarbetad inom International Electrotechnical Commission, IEC. Tidigare fastställd svensk standard SS-EN 60357, utgåva 10, 2001, gäller ej fr o m 2005-12-01. *) EN 60357:2003 ikraftsattes 2003-02-28 som SS-EN 60357 genom offentliggörande, d v s utan utgivning av något svenskt dokument. **) Corrigendum, July 2003 till EN 60357:2003 ingår i standarden. ICS 29.140.20 Denna standard är fastställd av, som också kan lämna upplysningar om sakinnehållet i standarden. Postadress: SEK, Box 1284, 164 29 KISTA Telefon: 08-444 14 00. Telefax: 08-444 14 30 E-post: sek@elstandard.se. Internet: www.elstandard.se
Standarder underlättar utvecklingen och höjer elsäkerheten Det finns många fördelar med att ha gemensamma tekniska regler för bl a säkerhet, prestanda, dokumentation, utförande och skötsel av elprodukter, elanläggningar och metoder. Genom att utforma sådana standarder blir säkerhetskraven tydliga och utvecklingskostnaderna rimliga samtidigt som marknadens acceptans för produkten eller tjänsten ökar. Många standarder inom elområdet beskriver tekniska lösningar och metoder som åstadkommer den elsäkerhet som föreskrivs av svenska myndigheter och av EU. SEK är Sveriges röst i standardiseringsarbetet inom elområdet svarar för standardiseringen inom elområdet i Sverige och samordnar svensk medverkan i internationell och europeisk standardisering. SEK är en ideell organisation med frivilligt deltagande från svenska myndigheter, företag och organisationer som vill medverka till och påverka utformningen av tekniska regler inom elektrotekniken. SEK samordnar svenska intressenters medverkan i SEKs tekniska kommittéer och stödjer svenska experters medverkan i internationella och europeiska projekt. Stora delar av arbetet sker internationellt Utformningen av standarder sker i allt väsentligt i internationellt och europeiskt samarbete. SEK är svensk nationalkommitté av International Electrotechnical Commission (IEC) och Comité Européen de Normalisation Electrotechnique (CENELEC). Standardiseringsarbetet inom SEK är organiserat i referensgrupper bestående av ett antal tekniska kommittéer som speglar hur arbetet inom IEC och CENELEC är organiserat. Arbetet i de tekniska kommittéerna är öppet för alla svenska organisationer, företag, institutioner, myndigheter och statliga verk. Den årliga avgiften för deltagandet och intäkter från försäljning finansierar SEKs standardiseringsverksamhet och medlemsavgift till IEC och CENELEC. Var med och påverka! Den som deltar i SEKs tekniska kommittéarbete har möjlighet att påverka framtida standarder och får tidig tillgång till information och dokumentation om utvecklingen inom sitt teknikområde. Arbetet och kontakterna med kollegor, kunder och konkurrenter kan gynnsamt påverka enskilda företags affärsutveckling och bidrar till deltagarnas egen kompetensutveckling. Du som vill dra nytta av dessa möjligheter är välkommen att kontakta SEKs kansli för mer information. Box 1284 164 29 Kista Tel 08-444 14 00 www.elstandard.se
EUROPEAN STANDARD EN 60357 NORME EUROPÉENNE EUROPÄISCHE NORM January 2003 ICS 29.140.20 Supersedes EN 60357:1988 + A4:1991 + A5:1993 + A6:1994 + A7:1994 + A8:1995 + A9:1996 + A10:1997 + A11:1997 + A12:1999 + A13:2000 English version Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002) Lampes tungstène-halogène (véhicules exceptés) - Prescriptions de performances (CEI 60357:2002) Halogen-Glühlampen (Fahrzeuglampen ausgenommen) - Anforderungen an die Arbeitsweise (IEC 60357:2002) This European Standard was approved by CENELEC on 2002-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60357:2003 E
EN 60357:2003-2 - Foreword The text of document 34A/1001/FDIS, future edition 3 of IEC 60375, prepared by SC 34A, Lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60357 on 2002-12-01. This European Standard Supersedes EN 60357:1988 + A4:1991 + A5:1993 + A6:1994 + A7:1994 + A8:1995 + A9:1996 + A10:1997 + A11:1997 + A12:1999 + A13:2000. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-12-01 Annexes designated "normative" are part of the body of the standard. Annexes designated "informative" are given for information only. In this standard, annexes A, B and ZA are normative and annexes C, D and E are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60357:2002 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60127-2 NOTE Harmonized as EN 60127-2:1991 (not modified). IEC 60269-3-1 NOTE Harmonized as HD 630.3.1 S3:2002 (modified). IEC 60335-2-56 NOTE Harmonized as EN 60335-2-56:1997 (not modified). IEC 60598-2 NOTE Harmonized as 60598-2-x series (partly modified). IEC 60630 NOTE Harmonized as EN 60630:1998 (modified). IEC 60682 NOTE Harmonized as EN 60682:1993 (not modified).
- 3 - EN 60357:2003 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-845 1987 International Electrotechnical Vocabulary (IEV) Chapter 845: Lighting - - IEC 60061-1 (mod) IEC 60432-2 (mod) - 1) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps - 1) Incandescent lamps - Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes EN 60061-1 1993 2) EN 60432-2 2000 2) IEC 60432-3 - 3) Part 3: Tungsten halogen lamps (nonvehicle) IEC 61341-1) Method of measurement of centre beam intensity and beam angle(s) of reflector lamps - - - - CIE 84 1989 The measurement of luminous flux - - 1) Undated reference. 2) Valid edition at date of issue. 3) To be published.
Corrigendum to EN 60357:2003 English version Title page Replace the title by: Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified) Lampes tungstène-halogène (véhicules exceptés) - Prescriptions de performances (CEI 60357:2002, modifiée) Halogen-Glühlampen (Fahrzeuglampen ausgenommen) - Anforderungen an die Arbeitsweise (IEC 60357:2002, modifiziert) Foreword Replace in the first line "IEC 60375" by "IEC 60357". Add after the first paragraph: By Technical Board decision D115/066 it was decided that the common modifications to the previous edition should be maintained.
EN 60457:2003/corrigendum July 2003-2 - Endorsement notice Replace the first paragraph by: The text of the International Standard IEC 60357:2002 was approved by CENELEC as a European Standard with agreed common modifications as given below. Delete all references to lamp caps E11. COMMON MODIFICATIONS Delete the following lamp data sheets from the IEC text: 357-IEC-3211-3 357-IEC-3230-2 357-IEC-6115-1 357-IEC-6720-1 357-IEC-6722-1 357-IEC-6725-1 357-IEC-6726 357-IEC-6727 Delete the following particular lamp types from lamp data sheets in the IEC text: Lamp data sheet Lamp types deleted Rated wattage Voltage range Z nom 357-IEC-3005-3 1 000 B 89,6 1 000 B 104,1 750 B 114,2 1 000 B 138,1 1 000 B 162,0 1 500 B 162,0 357-IEC-3105-2 650 B 74,9 800 C 74,9 1 250 C 121,7 357-IEC-3210-3 750 B 357-IEC-4105-4 2 000 327,4 July 2003
60357 IEC:2002 3 CONTENTS 1 General...9 1.1 Scope...9 1.2 Normative references...9 1.3 Definitions...11 1.4 Lamp requirements...14 1.4.1 General...14 1.4.2 Caps and bases...14 1.4.3 Dimensions...14 1.4.4 Wattage...14 1.4.5 Photometric characteristics...14 1.4.6 Lumen maintenance and centre beam intensity maintenance...17 1.4.7 Cautionary notices for lamps without outer envelope...17 1.5 Information for luminaire design...17 1.6 General data sheets and lamp data sheets...17 1.6.1 Numbering system...17 1.6.2 General data sheets...18 1.6.3 Lamp data sheets...18 2 Projection lamps 3 Photographic lamps (including studio) 4 Floodlight lamps 5 Special purpose lamps 6 General purpose lamps 7 Stage lighting lamps Annex A (normative) Method of test for photometric, maintenance and life characteristics... A-2 Annex B (normative) Symbols... B-2 Annex C (informative) Information for luminaire design... C-2 Annex D (informative) Bulb wall temperature measurement... D-2 Annex E (informative) ILCOS codes... E-2 Bibliography
60357 IEC:2002 9 TUNGSTEN HALOGEN LAMPS (non-vehicle) PERFORMANCE SPECIFICATIONS 1 General 1.1 Scope This International Standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: Projection (including cinematograph and still projection) Photographic (including studio) Floodlighting Special purpose General purpose Stage lighting For some of the requirements given in this standard reference is made to "the relevant data sheet". For some lamps these data sheets are contained in this standard. For other lamps, falling under the scope of this standard, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this standard relate only to type testing. NOTE The requirements and tolerances permitted by this standard correspond to testing of a type test sample, submitted by the manufacturer for that purpose. In principle this type test sample should consist of units having characteristics typical of the manufacturer's production and being as close to the production centre point values as possible. It may be expected with the tolerances given in the standard that products manufactured in accordance with the type test sample will comply with the standard for the majority of production. Due to the production spread however, it is inevitable that there will sometimes be products outside the specified tolerances. For guidance on sampling plans and procedures for inspection by attributes, see IEC 60410. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-845: 1987, International Electrotechnical Vocabulary (IEV) - Chapter 845: Lighting IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps IEC 60432-2: Incandescent lamps Safety specifications Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes IEC 60432-3: Incandescent lamps - Safety specifications Part 3: Tungsten halogen lamps (nonvehicle) 1 ) 1) To be published.
60357 IEC:2002 11 IEC 61341: Method of measurement of centre beam intensity and beam angle(s) of reflector lamps CIE 84: 1989, The measurement of luminous flux