Skyddskläder mot hetta och flamma Material, materialkombinationer och kläder med begränsad flamspridning (ISO 14116:2008)

Relevanta dokument
Information technology Open Document Format for Office Applications (OpenDocument) v1.0 (ISO/IEC 26300:2006, IDT) SWEDISH STANDARDS INSTITUTE

Surfaces for sports areas Determination of vertical deformation. Golvmaterial Sportbeläggningar Bestämning av vertikal deformation

Eurokod 3 : Dimensionering av stålkonstruktioner Del 4-1: Silor. Eurocode 3: Design of steel structures Part 4-1: Silos SWEDISH STANDARDS INSTITUTE

SVENSK STANDARD SS-EN ISO /A1:2016

Eurokod 9 : Dimensionering av aluminiumkonstruktioner Del 1-1: Allmänna regler

Eurokod 7: Dimensionering av geokonstruktioner Del 2: Marktekniska undersökningar

Eurokod 3: Dimensionering av stålkonstruktioner Del 5: Pålar och spont. Eurocode 3: Design of steel structures Part 5: Piling

Eurokod 2: Dimensionering av betongkonstruktioner Del 3: Behållare och avskiljande konstruktioner för vätskor och granulära material

Bevakningstjänster Terminologi. Security service providers Terminology SWEDISH STANDARDS INSTITUTE

SVENSK STANDARD SS :2010

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO

Byggdokument Angivning av status. Construction documents Indication of status SWEDISH STANDARDS INSTITUTE

Sanitetsarmatur Sanitetsarmatur med elektronisk öppningsoch avstängningsfunktion. Sanitary tapware Electronic opening and closing sanitary tapware

SVENSK STANDARD SS-EN ISO 9876

SVENSK STANDARD SS-EN ISO 7291:2010/A1:2015

SVENSK STANDARD SS-EN ISO

Byggritningar Ritsätt Fästelement. Construction drawings Representation of fasteners SWEDISH STANDARDS INSTITUTE


SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS- EN ISO :2015/A1:2017

System för fjärrkommunikation med debiteringsmätare Del 6: Local bus. Communication systems for meters and remote reading of meters Part 6: Local bus

Akustik Buller från maskiner och utrustning Regler för utformning av produktspecifika mätstandarder (ISO 12001:1996)

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO 5555/A1:2014

Teknisk rapport SIS-TR 18:2007 Publicerad/Published: Utgåva/Edition: 1 Språk/Language: svenska/swedish ICS: ;

Akustik Deklaration av verifiering av bulleremissionsvärden från maskiner och utrustning (ISO 4871:1996)

SVENSK STANDARD SS-EN ISO 9706

SVENSK STANDARD SS-EN ISO 11987

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO 14534

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS EN 15802:2009

SVENSK STANDARD SS-EN ISO

SWEDISH STANDARDS INSTITUTE

SVENSK STANDARD SS-EN 299

SVENSK STANDARD SS-EN ISO 2578

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN 175

Byggakustik Mätning av rumakustiska parametrar Del 2: Efterklangstid i vanliga rum (ISO :2008/Cor 1:2009)

SVENSK STANDARD SS-EN ISO 11409

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO 14889

SVENSK STANDARD SS-EN ISO 11341

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO 140-7

Aerospace series Lamps, incandescent Part 007: Lamp, code 74 Product standard SWEDISH STANDARDS INSTITUTE

Artificial climbing structures Part 3: Safety requirements and test methods for climbing holds SWEDISH STANDARDS INSTITUTE

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO 8733

SVENSK STANDARD SS-EN ISO 15611:2004

SVENSK STANDARD SS-EN 978

Fertilizers Determination of the water-soluble potassium content SWEDISH STANDARDS INSTITUTE

Tillägg 1 (ISO :1997/Amd 1:2009)

SVENSK STANDARD SS-EN

Byggdokument Ändringar. Construction documents Revisions SWEDISH STANDARDS INSTITUTE

SVENSK STANDARD SS-EN ISO

Eurokod 3: Dimensionering av stålkonstruktioner Del 1-3: Kallformade profiler och profilerad plåt

Oförstörande provning av svetsar Magnetpulverprovning (ISO 17638:2003) Non-destructive testing of welds Magnetic particle testing (ISO 17638:2003)

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN 828

SVENSK STANDARD SS-EN ISO :2009/AC:2010

SVENSK STANDARD SS-EN ISO

Specifikation för och kvalificering av svetsprocedurer för svetsning av metalliska material Svetsdatablad (WPS) Del 2: Gassvetsning (ISO :2001)

SVENSK STANDARD SS-EN 179

Surface active agents Sulfated ethoxylated alcohols and alkylphenols Determination of content of unsulfated matter (ISO 8799:2009)

SVENSK STANDARD SS-EN ISO 308

SVENSK STANDARD SS-EN

Gjutstål Gjutgods av austenitiskt manganstål. Steel castings Austenitic manganese steel castings SWEDISH STANDARDS INSTITUTE

Maskinsäkerhet Styrsystem Säkerhetsrelaterade delar i styrsystem Del 1: Allmänna konstruktionsprinciper (ISO :2006/Cor 1:2009)

SVENSK STANDARD SS-EN

Oförstörande provning av svetsar Magnetpulverprovning av svetsar Acceptansnivåer (ISO 23278:2006)

SVENSK STANDARD SS-EN ISO 11734

SWEDISH STANDARDS INSTITUTE

SVENSK STANDARD SS-EN ISO 9394

Värmeväxlare - Terminologi. Heat exchangers -Terminology

SVENSK STANDARD SS-EN ISO 9001:2008/AC:2009

SVENSK STANDARD SS-EN ISO

Enbart förhandsgranskning

Tandvård Medicintekniska produkter för tandvård Dentala implantat. Dentistry Medical devices for dentistry Dental implants SWEDISH STANDARDS INSTITUTE

Nödduschar och anordningar för ögonspolning Del 3: Nödduschar ej fast anslutna till vattenledning

SVENSK STANDARD SS-EN

Brottsförebyggande genom stadsplanering och byggnadsutformning Del 1: Terminologi

Naturgas Bestämning av svavelföreningar Del 1: Allmän introduktion (ISO :2007)

SVENSK STANDARD SS-EN ISO 2739

SWEDISH STANDARDS INSTITUTE

Maskinsäkerhet Nödstoppsutrustning Konstruktionsprinciper. Safety of machinery Emergency stop Principles for design (ISO 13850:2006)

Transkript:

SVENSK STANDARD SS-EN ISO 14116:2008 Fastställd/Approved: 2008-04-21 Publicerad/Published: 2008-05-22 Utgåva/Edition: 1 Språk/Language: engelska/english ICS: 13.340.10 Skyddskläder mot hetta och flamma Material, materialkombinationer och kläder med begränsad flamspridning (ISO 14116:2008) Protective clothing Protection against heat and flame Limited flame spread materials, material assemblies and clothing (ISO 14116 :2008) SWEDISH STANDARDS INSTITUTE

Hitta rätt produkt och ett leveranssätt som passar dig Standarder Genom att följa gällande standard både effektiviserar och säkrar du ditt arbete. Många standarder ingår dessutom ofta i paket. Tjänster Abonnemang är tjänsten där vi uppdaterar dig med aktuella standarder när förändringar sker på dem du valt att abonnera på. På så sätt är du säker på att du alltid arbetar efter rätt utgåva. e-nav är vår online-tjänst som ger dig och dina kollegor tillgång till standarder ni valt att abonnera på dygnet runt. Med e-nav kan samma standard användas av flera personer samtidigt. Leveranssätt Du väljer hur du vill ha dina standarder levererade. Vi kan erbjuda dig dem på papper och som pdf. Andra produkter Vi har böcker som underlättar arbetet att följa en standard. Med våra böcker får du ökad förståelse för hur standarder ska följas och vilka fördelar den ger dig i ditt arbete. Vi tar fram många egna publikationer och fungerar även som återförsäljare. Det gör att du hos oss kan hitta över 500 unika titlar. Vi har även tekniska rapporter, specifikationer och workshop agreement. Matriser är en översikt på standarder och handböcker som bör läsas tillsammans. De finns på sis.se och ger dig en bra bild över hur olika produkter hör ihop. Standardiseringsprojekt Du kan påverka innehållet i framtida standarder genom att delta i någon av SIS ca 400 Tekniska Kommittéer. Find the right product and the type of delivery that suits you Standards By complying with current standards, you can make your work more efficient and ensure reliability. Also, several of the standards are often supplied in packages. Services Subscription is the service that keeps you up to date with current standards when changes occur in the ones you have chosen to subscribe to. This ensures that you are always working with the right edition. e-nav is our online service that gives you and your colleagues access to the standards you subscribe to 24 hours a day. With e-nav, the same standards can be used by several people at once. Type of delivery You choose how you want your standards delivered. We can supply them both on paper and as PDF files. Other products We have books that facilitate standards compliance. They make it easier to understand how compliance works and how this benefits you in your operation. We produce many publications of our own, and also act as retailers. This means that we have more than 500 unique titles for you to choose from. We also have technical reports, specifications and workshop agreements. Matrices, listed at sis.se, provide an overview of which publications belong together. Standardisation project You can influence the content of future standards by taking part in one or other of SIS s 400 or so Technical Committees.

Europastandarden EN ISO 14116:2008 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 14116:2008. Denna standard ersätter SS-EN 533, utgåva 1. The European Standard EN ISO 14116:2008 has the status of a Swedish Standard. This document contains the official English version of EN ISO 14116:2008. This standard supersedes the Swedish Standard SS-EN 533, edition 1. Copyright/Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by!the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon 08-555 520 00. Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), tel +46 8 555 520 00. Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. SIS Förlag AB, SE 118 80 Stockholm, Sweden. Tel: +46 8 555 523 10. Fax: +46 8 555 523 11. E-mail: sis.sales@sis.se Internet: www.sis.se

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 14116 April 2008 ICS 13.340.10 Supersedes EN 533:1997 English Version Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2008) Vêtements de protection - Protection contre la chaleur et la flamme - Matériaux, assemblages de matériaux et vêtements à propagation de flamme limitée (ISO 14116:2008) Schutzkleidung - Schutz gegen Hitze und Flammen - Materialien, Materialkombinationen und Kleidung mit begrenzter Flammenausbreitung (ISO 14116:2008) This European Standard was approved by CEN on 2 November 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14116:2008: E

SS-EN ISO 14116:2008 (E) EN ISO 14116:2008 (E) Foreword This document (EN ISO 14116:2008) has been prepared by Technical Committee CEN/TC 162 Protective clothing including hand and arm protection and lifejackets", the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment". This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 533:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. iii 3

INTERNATIONAL STANDARD SS-EN ISO 14116:2008 (E) ISO 14116:2008(E) Protective clothing Protection against heat and flame Limited flame spread materials, material assemblies and clothing 1 Scope This International Standard specifies the performance requirements for the limited flame spread properties of materials, material assemblies and protective clothing in order to reduce the possibility of the clothing burning and thereby itself constituting a hazard. Additional requirements for clothing are also specified. Protective clothing complying with this International Standard is intended to protect workers against occasional and brief contact with small igniting flames, in circumstances where there is no significant heat hazard and without the presence of another type of heat. When protection against heat hazards is necessary in addition to protection against limited spread flammability, then standards, such as ISO 11612, are more appropriate. A classification system is given for materials, material assemblies and garments which are tested according to ISO 15025:2000, Procedure A. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 13934-1:1999, Textiles Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method ISO 13935-2:1999, Textiles Seam tensile properties of fabrics and made-up textile articles Part 2: Determination of maximum force to seam rupture using the grab method ISO 13937-2:2000, Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) ISO 15025:2000, Protective clothing Protection against heat and flame Method of test for limited flame spread EN 340:2003, Protective clothing General requirements ISO 2008 All rights reserved 1

ISO SS-EN 14116:2008(E) ISO 14116:2008 (E) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 ageing changing of the product performance over time during use or storage NOTE Ageing is caused by a combination of several factors, such as: cleaning, maintenance or disinfecting process; exposure to visible and/or ultra-violet radiation; exposure to high or low temperatures or to changing temperatures; exposure to chemicals including humidity; exposure to biological agents such as bacteria, fungi, insects or other pests; exposure to mechanical action such as abrasion, flexing, pressure and strain; exposure to contaminants such as dirt, oil, splashes of molten metal, etc.; exposure to wear and tear. [ISO 11611:2007, definition 3.1] 3.2 assembly two or more separate layers of the same or different materials, or several garments to be worn together 3.3 cleaning process by which a PPE is made serviceable and/or hygienically wearable again by removing any dirt or contamination NOTE A cleaning cycle is typically a washing plus drying or a dry cleaning treatment followed, if required, by ironing or other finishing. 3.4 cleaning index letter indicating that the material or material assembly was subjected to a cleansing procedure specified in 5.2.2 before being tested for limited flame spread 3.5 garment single item of clothing which may consist of single or multiple layers 3.6 hole break in the test specimen of at least 5 mm by 5 mm in size caused by melting, glowing or flaming 3.7 limited flame spread index number indicating that the material or material assembly has achieved a specific level of performance NOTE See Clause 7. 2 ISO 2008 All rights reserved