SVENSK STANDARD SS-EN 10085 Fastställd 2001-08-10 Utgåva 1 Nitrerstål Tekniska leveransbestämmelser Nitriding steels Technical delivery conditions ICS 77.140.10 Språk: engelska, svenska Tryckt i december 2001 Copyright SIS. Reproduction in any form without permission is prohibited.
Europastandarden gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av med svensk översätning. Standarden ersättter SS 14 29 40, utgåva 7. The European Standard has the status of a Swedish Standard. This document contains the official English version of with a Swedish translation. This standard supersedes the Swedish standard SS 14 29 40, edition 7. Denna standard Materialbeteckning This standard Material designation Tidigare svensk standard Former Swedish standard, Namn Name Nummer Number SS-stål SS-steel 41CrAlMo7-10 1.8509 2940 Dokumentet består av 55 sidor. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, tel 08-555 520 00. Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Postadress: SIS Förlag AB, 118 80 STOCKHOLM Telefon: 08-555 523 10. Telefax: 08-555 523 11 E-post: sis.sales@sis.se. Internet: www.sisforlag.se
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 10085 March 2001 ICS 77.140.10 English version Nitriding steels - Technical delivery conditions Aciers pour nitruration - Conditions techniques de livraison Nitrierstähle - Technische Lieferbedingungen This European Standard was approved by CEN on 19 January 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E
EUROPASTANDARD EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM Provläsningsexemplar / Preview EN 10085 Mars 2001 ICS 77.140.10 Svensk version Nitrerstål Tekniska leveransbestämmelser Aciers pour nitruration Conditions techniques de livraison Nitriding steels Technical delivery conditions Nitrierstähle Technische Lieferbedingungen Denna standard är den officiella svenska versionen av. För översättningen svarar SIS. Denna europastandard antogs av CEN den 19 januari 2001. CEN-medlemmarna är förpliktade att följa fordringarna i CEN/CENELECs interna bestämmelser som anger på vilka villkor denna europastandard i oförändrat skick skall ges status som nationell standard. Aktuella förteckningar och bibliografiska referenser rörande sådana nationella standarder kan på begäran erhållas från CENs centralsekretariat eller från någon av CENs medlemmar. Denna europastandard finns i tre officiella versioner (engelsk, fransk och tysk). En version på något annat språk, översatt under ansvar av en CEN-medlem till sitt eget språk och anmäld till CENs centralsekretariat, har samma status som de officiella versionerna. CENs medlemmar är de nationella standardiseringsorganen i Belgien, Danmark, Finland, Frankrike, Grekland, Irland, Island, Italien, Luxemburg, Nederländerna, Norge, Portugal, Schweiz, Spanien, Storbritannien, Sverige, Tjeckien, Tyskland och Österrike. CEN European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 BRUSSELS 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members Ref. Nr. Sv
Page 2 Provläsningsexemplar / Preview Contents Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions 5 4 Classification and designation 6 4.1 Classification 6 4.2 Designation 6 5 Information to be supplied by the purchaser 6 5.1 Mandatory information 6 5.2 Options 7 6 Manufacturing process 8 6.1 General 8 6.2 Heat-treatment and surface condition at delivery 8 6.3 Cast separation 8 7 Requirements 8 7.1 Chemical composition, hardness and mechanical properties 8 7.2 Shearability 8 7.3 Structure 8 7.4 Internal soundness 9 7.5 Surface quality and decarburization 9 7.6 Dimensions, tolerances on dimensions and shape 9 8 Inspection and testing 9 8.1 Types and contents of inspection documents 9 8.2 Specific inspection and testing 10 9 Marking 11 Annex A (normative): Ruling sections for the mechanical properties 22 Annex B (normative): Supplementary or special requirements 24 Annex C (informative): Heat treatment 25 Annex D (informative): Dimensional standards applicable to products complying 26 with this European Standard Bibliography 27
Sida 2 Innehåll Förord... 3 1 Omfattning... 4 2 Normativa hänvisningar... 4 3 Termer och definitioner... 5 4 Klassificering och beteckning... 6 4.1 Klassificering... 6 4.2 Beteckning... 6 5 Information som skall lämnas av köparen... 6 5.1 Obligatorisk information... 6 5.2 Valfri fordringar... 7 6 Tillverkningsmetod... 8 6.1 Allmänt... 8 6.2 Värmebehandlingstillstånd vid leverans... 8 6.3 Separering av charger... 8 7 Fordringar... 8 7.1 Kemisk sammansättning, hårdhet och mekaniska egenskaper... 8 7.2 Klippbarhet... 8 7.3 Struktur... 8 7.4 Frihet från inre fel... 9 7.5 Ytbeskaffenhet och avkolning... 9 7.6 Dimensioner och toleranser på mått och form... 9 8 Kontroll och provning... 9 8.1 Typer av och innehåll i kontrollintyg... 9 8.2 Specifik kontroll och provning... 10 9 Märkning... 11 Bilaga A (normativ) Ekvivalenta tvärsnitt för mekaniska egenskaper... 22 A.1 Definition... 22 A.2 Bestämning av det ekvivalenta tvärsnittets diameter... 22 Bilaga B (normativ) Tilläggs- eller specialfordringar... 24 B.1 Mekaniska egenskaper hos referensprovstav i härdat och anlöpt tillstånd... 24 B.2 Icke metalliska inneslutningar... 24 B.3 Oförstörande provning... 24 B.4 Produktanalys... 24 B.5 Särskild märkning... 24 Bilaga C (informativ) Värmebehandling... 25 Bilaga D (informativ) Formvarustandarder tillämpliga för produkter överensstämmande med denna europastandard... 26 Litteraturförteckning... 27
Page 3 Provläsningsexemplar / Preview Foreword This European Standard has been prepared by Technical Committee ECISS/TC 23 Steels for heat treatment, alloy steels and free-cutting steels - Qualities and dimensions, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at the latest by September 2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Sida 3 Förord Denna europastandard har utarbetats av ECISS/TC 23, Stål för värmebehandling, legerade stål och automatstål Stålsorter. Sekretariatet hålls av DIN. Denna europastandard skall ges status som nationell standard, antingen genom att publicera en identisk text eller genom ikraftsättning senast september 2001, och motstridande nationella standarder skall dras in september 2001. Enligt CEN/CENELECs interna bestämmelser är standardiseringsorganen i följande länder bundna att anta denna europastandard: Belgien, Danmark, Finland, Frankrike, Grekland, Irland, Island, Italien, Luxemburg, Nederländerna, Norge, Portugal, Schweiz, Spanien, Storbritannien, Sverige, Tjeckien, Tyskland och Österrike.
Page 4 Provläsningsexemplar / Preview 1 Scope 1.1 This European Standard specifies the technical delivery requirements for semi-finished products, e. g. blooms, billets, slabs (see NOTE 3); bars (see NOTE 3); rod; wide flats; hot- or cold-rolled strip and sheet/plate; forgings (see NOTE 3) manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, line 2 to 4 and in one of the surface conditions given in Table 2. The steels are, in general, intended for the fabrication of quenched and tempered and generally machined and subsequently nitrided parts. NOTE 1 Some grades from EN 10083-1 are also used for nitriding treatment. NOTE 2 Related European Standards are given in Bibliography. NOTE 3 Hammer-forged semi-finished products (blooms, billets, slabs etc.) and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term forgings. 1.2 In special cases, variations in these technical delivery requirements or additions to them may form the subject of an agreement at the time of enquiry and order (see annex B). 1.3 In addition to the specifications of this European Standard, the general technical delivery requirements of EN 10021 are applicable. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 10002-1, Metallic materials - Tensile testing - Part 1: Test method (at ambient temperature) including Addendum AC1:1990" EN 10020, Definition and classification of grades of steel
Sida 4 1 Omfattning 1.1 Denna europastandard anger tekniska leveransbestämmelser för halvfabrikat t ex. blooms, billets och slabs (se ANM 3), stång (se ANM 3), valstråd, bredplattstång, varm eller kallvalsad plåt och band, smide (se ANM 3) tillverkade av nitrerstål enligt tabell 3 och levererade i något av värmebehandlingstillstånden som ges för olika typer av produkter i tabell 1, rad 2 till 4 och i något av yttillstånden i tabell 2. Stålen är i allmänhet avsedda för tillverkning av seghärdade detaljer som normalt först bearbetas och sedan nitreras. ANM 1 Vissa av stålsorterna i EN 10083-1 nitreras också. ANM 2 Liknande standarder finns i litteraturförteckningen. ANM 3 Hejarsmidda halvfabrikat (blooms, billets, slabs mm) och hejarsmidd stång är i fortsättningen inkluderat i halvfabrikat och ej under termen smide. 1.2 I särskilda fall kan avvikelser från dessa tekniska leveransbestämmelser eller tillägg till dem bli föremål för överenskommelse vid förfrågan och beställningstillfället (se bilaga B). 1.3 Utöver bestämmelserna i denna europastandard är de allmänna tekniska leveransbestämmelserna enligt EN 10021 tillämpliga. 2 Normativa hänvisningar Denna standard innehåller daterade eller odaterade hänvisningar till regler i andra publikationer. Dessa normativa hänvisningar återfinns i den löpande texten. Publikationerna anges nedan. Beträffande daterade hänvisningar till publikationer som senare har ändrats eller fått tillägg, gäller dessa ändringar eller tillägg endast då de har införts i denna standard. Vid odaterade hänvisningar gäller den senaste utgåvan av publikationen (inklusive tillägg). EN 10002-1 EN 10020 Metalliska material Dragprovning Del 1: Provningsmetod (vid rumstemperatur), inklusive tillägg AC1:1990 Definition och klassificering av ståltyper