SVENSK STANDARD SS-EN 861:2007+A2:2012

Transkript

1 SVENSK STANDARD SS-EN 861:2007+A2:2012 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 1 Språk/Language: engelska/english ICS: ; Träbearbetningsmaskiner Maskinsäkerhet Kombinerade riktoch planhyvlar Safety of woodworking machines Surface planing and thicknessing machines This preview is downloaded from Buy the entire standard via

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN 861:2007+A2:2012 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN 861:2007+A2:2012. Denna standard ersätter SS-EN 861:2007+A1:2009, utgåva 1. The European Standard EN 861:2007+A2:2012 has the status of a Swedish Standard. This document contains the official version of EN 861:2007+A2:2012. This standard supersedes the Swedish Standard SS-EN 861:2007+A1:2009, edition 1. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Träbearbetningsmaskiner och -verktyg, SIS/TK 247. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

4

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 861:2007+A2 June 2012 ICS Supersedes EN 861:2007+A1:2009 English Version Safety of woodworking machines - Surface planing and thicknessing machines Sécurité des machines pour le travail du bois - Machines combinées à raboter et à dégauchir Sicherheit von Holzbearbeitungsmaschinen - Kombinierte Abricht- und Dickenhobelmaschinen This European Standard was approved by CEN on 10 May 2007 and includes Amendment 1 approved by CEN on 16 July 2009 and Amendment 2 approved by CEN on 20 May CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 861:2007+A2:2012: E

6 SS-EN 861:2007+A2:2012 (E) (E) Contents Page Foreword...4 Introduction Scope Normative references Terms and definitions General Definitions Terms List of significant hazards Safety requirements and/or measures General Controls Safety and reliability of control systems Position of controls Starting Normal stopping Emergency stop Failure of the power supply Failure of the control circuit Protection against mechanical hazards Stability Hazard of break up during operation Tool holder and tool design Braking Devices to minimise the possibility or the effect of ejection Work-piece supports and guides Prevention of access to moving parts Guarding of drives Characteristics of #cutterblock$ guards Safety appliances Demountable power feed #unit$ Protection against non-mechanical hazards Fire Noise Emission of chips and dust Electricity Ergonomics and handling Pneumatics Hydraulics Electromagnetic compatibility Supply disconnection (isolation) Static electricity Maintenance Information for use General Marking Instruction handbook Annex A (normative) Tests for bridge type guards for planing machines

7 SS-EN 861:2007+A2:2012 (E) A.1 Compression test A.2 Shock test A.3 Strength test for bridge type guard Annex B (normative) Table lip resistance test B.1 General B.2 Work-piece B.3 Measurements B.4 Test B.5 Result Annex C (normative) Kickback test Annex D (normative) Stability test for displaceable machines D.1 Stability test in the surfacing mode D.2 Stability test in the thicknessing mode Annex E (normative) Impact test method for guards E.1 General E.2 Test method E.2.1 Preliminary remarks E.2.2 Testing equipment E.2.3 Projectile for guards E.2.4 Sampling E.2.5 Test procedure E.3 Results E.4 Assessment E.5 Test report E.6 Test equipment for impact test Annex F (normative) Braking tests F.1 Conditions for all tests F.2 #Un-braked$ run-down time F.3 Braked run-down time Annex ZA (informative)!relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" Bibliography

8 SS-EN 861:2007+A2:2012 (E) (E) Foreword This document (EN 861:2007+A2:2012) has been prepared by Technical Committee CEN/TC 142 Woodworking machines - Safety, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2012, and conflicting national standards shall be withdrawn at the latest by December Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on , Corrigendum 1, issued by CEN on and Amendment 2, issued by CEN on This document supersedes #EN 861:2007+A1:2009$. The start and finish of text introduced or altered by amendment is indicated in the text by tags! " and #$. The modifications of the related CEN Corrigendum have been implemented at the appropriate places in the text and are indicated by the tags. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. #For relationship with EU Directive(s), see informative Annexes ZA, which is an integral part of this document.$ Organisation contributing to the preparation of the European Standard include the European Association of Manufacturer of Woodworking Machines "EUMABOIS". The European Standards produced by CEN/TC 142 are particular to woodworking machines and complement the relevant A and B standards on the subject of general safety (see introduction of #EN ISO 12100:2010$ for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 4

9 SS-EN 861:2007+A2:2012 (E) Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This document is a type C standard as stated in #EN ISO 12100:2010$. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. The requirements of this document are directed to manufacturers and their authorised representatives of surface planing and thicknessing machines. They are also useful for designers and importers. This document also includes provision and examples of information to be provided by the manufacturer to the user. Common requirements for tooling are given in #EN 847-1:2005+A1:2007$. 5

10 SS-EN 861:2007+A2:2012 (E) (E) 1 Scope This document!specifies all significant" hazards, hazardous situation and events as listed in Clause 4 relevant to stationary and displaceable surface planing and thicknessing machines with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planning mode) and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The cutterblock is fixed in position and for thicknessing an integrated feed is provided. The machines are designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer #including reasonably foreseeable misuse$. #Machines which are designed to work wood based materials may also be used for thicknessing hardened plastic materials with similar physical characteristics as wood.$ This document does not deal with any hazards which result from the attachment of an optional mortising unit. These hazards are covered by #EN 940:2009+A1:2012$. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; NOTE 1 Transportable motor-operated electric tools are covered by the requirements of #EN :2009$ together with #EN :2011$. b) surface planing and thicknessing machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode; c) machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units; d) machines where surfacing and thicknessing can be performed at the same time. This document is not applicable to surface planing and thicknessing machines which are manufactured before the date of its publication as EN. NOTE 2 Machines covered by this document are listed under A.5 of Annex IV of the Machinery Directive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.!deleted text" #EN 847-1:2005+A1:2007$, Tools for woodworking Safety requirements Part 1: Milling tools, circular saw blades #deleted text$ #EN :2003+A1:2008$, Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery #EN :2005+A1:2008$, Safety of machinery Human physical performance Part 4: Evaluation of working postures and movements in relation to machinery 6

11 SS-EN 861:2007+A2:2012 (E) #EN 1037:1995+A1:2008$, Safety of machinery Prevention of unexpected start-up #EN 1088:1995+A2:2008$, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 50178:1997, Electronic equipment for use in power installations EN :2005, Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission EN :2003, Electromagnetic compatibility (EMC) Product family standard for machine tools Part 2: Immunity EN :2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC :2005, modified) EN :1999 1), Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (IEC :1999) EN 60529:1991 2), Degree of protection provided by enclosures (IP code) (IEC 60529:1989) EN :2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC :2004, modified) #deleted text$ #EN :2007, Adjustable speed electrical power drive systems Part 5-2: Safety requirements Functional (IEC :2007)$ #EN ISO :2010$, #Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room (ISO :2010)$ #EN ISO :2009$, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberant test rooms (ISO :1994) #EN ISO 3744:2010$, #Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)$ #EN ISO 3745:2009$, Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003) #EN ISO 3746:2010$, #Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)$ #EN ISO 4413:2010, Hydraulic fluid power General rules and safety requirements for systems and their components (ISO 4413:2010) EN ISO 4414:2010, Pneumatic fluid power General rules and safety requirements for systems and their components (ISO 4414:2010)$ 1) #EN :1999 is impacted by EN :1999/A1:2004.$ 2) #EN 60529:1991 is impacted by EN 60529:1991/A1:2000.$ 7