SVENSK STANDARD SS-EN ISO 14116:2015

Transkript

1 SVENSK STANDARD SS-EN ISO 14116:2015 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 2 Språk/Language: engelska/english ICS: Skyddskläder mot flamma Material, materialkombinationer och kläder med begränsad flamspridning (ISO 14116:2015) Protective clothing Protection against flame Limited flame spread materials, material assemblies and clothing (ISO 14116:2015)

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN ISO 14116:2015 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 14116:2015. Denna standard ersätter SS-EN ISO 14116:2008, utgåva 1. The European Standard EN ISO 14116:2015 has the status of a Swedish Standard. This document contains the official English version of EN ISO 14116:2015. This standard supersedes the Swedish Standard SS-EN ISO 14116:2008, edition 1. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Skyddskläder, SIS / TK 402. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

4

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO July 2015 ICS Supersedes EN ISO 14116:2008 English Version Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) Vêtements de protection - Protection contre les flammes - Matériaux, assemblages de matériaux et vêtements à propagation de flamme limitée (ISO 14116:2015) Schutzkleidung - Schutz gegen Flammen - Materialien, Materialkombinationen und Kleidung mit begrenzter Flammenausbreitung (ISO 14116:2015) This European Standard was approved by CEN on 19 June CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14116:2015 E

6 Contents Page European foreword...iv Introduction...v 1 Scope Normative references Terms and definitions General and design requirements Sampling, pre-treatment, and ageing Sampling Pre-treatment of material Ageing Conditioning Performance requirements Limited flame spread performance Physical requirements Tensile Strength Tear strength Burst strength Seam strength Dimensional change of textile materials Classification Requirements for limited flame spread index Requirements for limited flame spread index Requirements for limited flame spread index Marking Final index Single-layer materials Material assemblies Garments Information supplied by the manufacturer... 9 Annex A (normative) Uncertainty of measurement...10 Annex B (normative) Determination of property values for rating and classification...11 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC... Bibliography...1 iii

7 European foreword This document (EN ISO 14116:2015) has been prepared by Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment" in collaboration with Technical Committee CEN/TC 162 Protective clothing including hand and arm protection and lifejackets the secretariat of which is held by DIN This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document supersedes EN ISO 14116:2008. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14116:2015 has been approved by CEN as EN ISO 14116:2015 without any modification. 3

8 Introduction The purpose of this International Standard is to provide minimum performance requirements for clothing in order to reduce the possibility of the clothing and/or its materials burning when in occasional and brief contact with small flames and thereby, itself constituting a hazard. For complete protection against exposure to flame, it will be necessary to protect the head, face, hands, and/or feet with suitable PPE and, in some cases, appropriate respiratory protection might also be considered necessary. Attention is drawn to ISO/TR 2801:2007, [5] which sets out guidelines for selection, use, care, and maintenance of protective clothing against flame. Nothing in this International Standard is intended to restrict any jurisdiction, purchaser, or manufacturer from exceeding these minimum requirements. v

9 Protective clothing Protection against flame Limited flame spread materials, material assemblies and clothing 1 Scope This International Standard specifies the performance requirements for the limited flame spread properties of all materials, all material assemblies, and protective clothing in order to reduce the possibility of the clothing burning when in occasional and brief contact with small flames and thereby constituting a hazard. Additional requirements for clothing are also specified, including design requirements, mechanical requirements, marking, and information supplied by the manufacturer. When protection against heat hazards is necessary, in addition to protection against flame, this International Standard is not appropriate. International Standards such as ISO are to be used instead. A classification system is given for materials, material assemblies, and garments which are tested according to ISO 15025, Procedure A. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO , Textiles Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method ISO , Textiles Seam tensile properties of fabrics and made-up textile articles Part 2: Determination of maximum force to seam rupture using the grab method ISO , Textiles Tear properties of fabrics Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) ISO , Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension ISO , Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension ISO 15025, Protective clothing Protection against heat and flame Method of test for limited flame spread ISO 13688, Protective clothing General requirements ISO , Textiles Test methods for nonwovens Part 4: Determination of tear resistance ISO 5077, Textiles Determination of dimensional change in washing and drying 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 1

10 3.1 ageing changing of the product performance over time during use or storage Note 1 to entry: Ageing is caused by a combination of several factors, such as the following: cleaning, maintenance, or disinfecting process; exposure to visible and/or ultra-violet radiation; exposure to high or low temperatures or to changing temperatures; exposure to chemicals, including humidity; exposure to biological agents such as bacteria, fungi, insects, or other pests; exposure to mechanical action such as abrasion, flexing, pressure, and strain; exposure to contaminants such as dirt, oil, splashes of molten metal, etc.; exposure to wear and tear. [SOURCE: ISO 11611:2007, 3.1] 3.2 cleaning process by which an item of PPE is made serviceable and/or hygienically wearable again by removing any dirt or contamination Note 1 to entry: A cleaning cycle is typically a washing plus drying or a dry cleaning treatment followed, if required, by ironing or other finishing. 3.3 cleaning index letter indicating that the material or material assembly was subjected to a cleansing procedure specified in 5.2 before being tested for limited flame spread 3.4 clothing assembly series of garments arranged in the order as worn Note 1 to entry: They might contain multilayer materials, material combinations, or a series of separate garments in single layers. 3.5 component assembly combination of all materials and hardware presented exactly as the finished garment construction 3.6 conditioning keeping of the samples under standard conditions of temperature and relative humidity for a minimum period of time 3.7 garment single item of clothing which can consist of single or multiple layers 3.8 hole any opening, break, or discontinuity of any size in the original structure of the test specimen s fabric caused by application of the test flame [SOURCE: ISO 15025:2000, 2.8, modified] 2

11 3.9 hardware non-fabric items forming part of or optional extras in a garment EXAMPLE Metal or plastic buttons or zippers and touch and close fasteners or hook and loop fasteners interlining layer between the outermost layer and the innermost lining in a multilayer garment 3.11 limited flame spread index number indicating that the material or material assembly has achieved a specific level of performance Note 1 to entry: See Clause material substances, excluding hardware, of which an item of clothing is made 3.13 material assembly combination of all materials of a multi-layer garment presented exactly as the finished garment construction 3.14 material combination material produced from a series of separate layers, fixed together during the garment manufacturing stage 3.15 multilayer material material consisting of different layers intimately combined prior to the garment manufacturing stage EXAMPLE The combining process includes weaving, quilting, coating and gluing outer material outermost material of which the item of clothing is made 3.17 pre-treatment standard way of preparing the samples before testing Note 1 to entry: This can include e.g. a number of cleaning cycles, submitting the sample to heat, mechanical action or any other relevant exposure and is completed by conditioning. [SOURCE: ISO 11611:2007, 3.8] 3.18 seam any method of permanent fastening between two or more pieces of material 3.19 structural seam seam that is necessary for the integrity of the garment 4 General and design requirements 4.1 Single layer garments containing limited flame spread index 1 materials, shall be worn over index 2 or index 3 garments and shall not come into contact with the skin (e.g. in the neck and wrist area). If an 3