SVENSK STANDARD SS-EN 54-5:2017

Transkript

1 SVENSK STANDARD SS-EN 54-5:2017 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 3 Språk/Language: engelska/english ICS: Brand och räddning Branddetekterings- och brandlarmsystem Del 5: Värmedetektorer av punkttyp Fire detection and fire alarm systems Part 5: Heat detectors Point heat detectors

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN 54-5:2017 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN 54-5:2017. Denna standard ersätter SS-EN 54-5, utgåva 2 och SS-EN 54-5 / A1 2002:2016, utgåva 1. The European Standard EN 54-5:2017 has the status of a Swedish Standard. This document contains the official English version of EN 54-5:2017. This standard supersedes the Swedish Standard SS-EN 54-5, edition 2 and SS-EN 54-5 / A1 2002:2016, edition 1. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Branddetektorer, brandlarmsystem, SIS / TK 360 / AG 02. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

4

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 54-5 February 2017 ICS Supersedes EN 54-5:2000 English Version Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Systèmes de détection et d'alarme incendie - Partie 5 : Détecteurs de chaleur - Détecteurs ponctuels Brandmeldeanlagen - Teil 5: Wärmemelder - Punktförmige Melder This European Standard was approved by CEN on 23 October CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 54-5:2017 E

6 Contents Page European foreword Scope Normative references Terms, definitions and abbreviations Terms and Definitions Abbreviations Product characteristics General Heat Response Categories...8 Table 1 Detector categorization temperatures Operational reliability Position of heat sensitive elements Individual alarm indication Connection of ancillary devices Monitoring of detachable detectors Manufacturer's adjustments On-site adjustment of response behaviour Software controlled detector (when provided) Nominal activation conditions/sensitivity Directional dependence Static response temperature Response times from typical application temperature Response times from 25 C Response times from high ambient temperature Reproducibility Response delay (response time) Additional tests for suffix S detectors Additional tests for suffix R detectors Tolerance to supply voltage - Variation in supply parameters Durability of Nominal activation conditions/sensitivity Temperature resistance Humidity resistance Corrosion resistance: Sulphur dioxide (SO 2) corrosion (endurance) Vibration resistance Electrical stability: Electromagnetic Compatibility (EMC), Immunity tests (operational) Testing, assessment and sampling methods General Atmospheric conditions for tests Operating conditions for tests Mounting arrangements Tolerances Measurement of response time Provision for tests

7 5.1.7 Test schedule Table 2 Test schedule for resettable point heat detectors Table 3 Test schedule for non-resettable point heat detectors Operational reliability Position of heat sensitive elements Individual alarm indication Connection of ancillary devices Monitoring of detachable detectors Manufacturer's adjustments On-site adjustment of response behaviour Software controlled detectors (when provided) Nominal activation conditions/sensitivity Directional dependence Static response temperature Response times from typical application temperature Table 4 Response time limits Response times from 25 C Response times from high ambient temperature Table 5 Response time limits from maximum application temperature Reproducibility Response delay (response time) Additional tests for suffix S detectors Table 6 Conditioning and airflow temperatures Table 7 Lower limit of response for category suffix S point heat detectors Additional test for suffix R detectors Table 8 Initial conditioning temperature for suffix R point heat detectors Tolerance to supply voltage Variation in supply parameters Durability of Nominal activation conditions/sensitivity Temperature resistance Table 9 Dry heat (endurance) conditioning temperatures Humidity resistance Corrosion resistance Vibration resistance Electrical stability Assessment and verification of constancy of performance (AVCP) General Type testing General Test samples, testing and compliance criteria Table 10 Number of samples to be tested and compliance criteria Test reports Factory production control FPC) General Requirements Product specific requirements Initial inspection of factory and FPC Continuous surveillance of FPC

8 6.3.6 Procedure for modifications One-off products, pre-production products, (e.g. prototypes) and products produced in very low quantities Classification Marking, labelling and packaging Annex A (normative) Heat tunnel for response time and response temperature measurements Annex B (informative) Information concerning the construction of the heat tunnel Figure B.1 Example of working section of heat tunnel Figure B.2 Example of mounting arrangement for simultaneously testing two point heat detectors (section A - A, see Figure B.1) Annex C (informative) Derivation of upper and lower limits of response times Table C.1 Thermal constants used to derive upper limits in Table Annex D (informative) Apparatus for impact test Figure D.1 Impact apparatus Annex E (informative) Data supplied with point heat detectors Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation ZA.1 Scope and relevant characteristics Table ZA.1 Relevant clauses for point heat detectors and intended use in fire detection and fire alarm systems installed in and around buildings ZA.2 Procedure for assessment and verification of constancy of performance (AVCP) of point heat detector ZA.2.1 System of AVCP Table ZA.2 System of AVCP Table ZA.3 Assignment of evaluation of conformity tasks for point heat detectors under system ZA.2.2 Declaration of performance (DoP) ZA General ZA Content ZA Example of DoP ZA.3 CE marking and labelling Bibliography

9 European foreword This document (EN 54-5:2017) has been prepared by Technical Committee CEN/TC 72 Fire detection and fire alarm systems, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall be withdrawn at the latest by February Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 54-5:2000. EN 54-5 has been revised as follows: Inclusion of new clauses and annexes: Clause 6 Assessment and verification of constancy of performance (AVCP) Clause 7 Classification and designation Clause 8 Marking, labelling and packaging Annex E (informative) Data supplied with point heat detectors The main technical changes are as follows: Applying the latest EN :2011 EMC for immunity tests. The editorial changes are as follows: Changes from classes to Categories Editorial changes in a number of clauses, such as software and General, in order to conform to the regulation. This document has been prepared under a standardization request given to CEN/CENELEC by the European Commission and the European Free Trade Association, and supports the basic requirements of Regulation (EU) 305/2011. For relationship with EU Regulation, see informative Annex ZA, which is an integral part of this document. EN 54, Fire detection and fire alarm systems, consists of the following parts: Part 1: Introduction Part 2: Control and indicating equipment Part 3: Fire alarm devices Sounders Part 4: Power supply equipment 5

10 Part 5: Heat detectors Point heat detectors Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization Part 10: Flame detector Point detectors Part 11: Manual call points Part 12: Smoke detectors Line detector using an optical light beam Part 13: Compatibility assessment of system components Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance (CEN/TS) Part 16: Voice alarm control and indicating equipment Part 17: Short circuit isolators Part 18: Input/output devices Part 20: Aspirating smoke detectors Part 21: Alarm transmission and fault warning routine equipment Part 22: Line-type heat detectors Part 23: Fire alarm devices Visual alarms Part 24: Components of voice alarm systems Loudspeakers Part 25: Components using radio links and system requirements Part 26: Carbon monoxide detectors Point detectors Part 27: Duct smoke detectors Part 28: Non-resettable (digital) line type heat detectors Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors Part 31: Multi-sensor detector Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors Part 32: Guidelines for the planning, design, installation, commissioning, use and maintenance of voice alarm systems (CEN/TS) NOTE This list includes standards that are in preparation and other standards may be added. For current status of published standards refer to According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 6

11 1 Scope This European Standard specifies the requirements, test methods and performance criteria for point heat detectors intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54-1:2011). This European Standard provides for the assessment of verification of consistency of performance (AVCP) of point heat detectors to this EN. For other types of heat detector, or for detectors intended for use in other environments, this standard should only be used for guidance. Heat detectors with special characteristics and developed for specific risks are not covered by this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 54-1:2011, Fire detection and fire alarm systems - Part 1: Introduction EN :2011, Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems EN :1994, Environmental testing - Part 1: General and guidance (IEC :1988) EN :2007, Environmental testing - Part 2-1: Tests - Test A: Cold (IEC :2007) EN :2007, Environmental testing - Part 2-2: Tests - Test B: Dry heat (IEC :2007) EN :2008, Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) (IEC :2008) EN :2009, Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock (IEC :2009) EN :2005, Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC :2005) EN :2003, Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections (IEC :2003) EN :2013, Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state (IEC :2012) ISO 209:2007, Aluminium and aluminium alloys Chemical composition 7