SVENSK STANDARD SS-EN :2007+A2:2012

Transkript

1 SVENSK STANDARD SS-EN :2007+A2:2012 Fastställd / Approved: Publicerad / Published: Utgåva / Edition: 1 Språk / Language: engelska / English ICS: ; Vägutrustning Skyddsanordningar Del 5: Skyddsanordningar för fordon Produktkrav och kontroll av överensstämmelse Road restraint systems Part 5: Product requirements and evaluation of conformity for vehicle restraint systems

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN :2007+A2:2012 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN :2007+A2:2012. Denna standard ersätter SS-EN :2007+A1:2008, utgåva 1. The European Standard EN :2007+A2:2012 has the status of a Swedish Standard. This document contains the official version of EN :2007+A2:2012. This standard supersedes the Swedish Standard SS-EN :2007+A1:2008, edition 1. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Vägutrustning, SIS / TK 248. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

4

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN :2007+A2 March 2012 ICS ; Supersedes EN :2007+A1:2008 English Version Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems Dispositifs de retenue routiers - Partie 5: Exigences relatives aux produits et évaluation de la conformité pour les dispositifs de retenue pour véhicules Rückhaltesysteme an Straßen - Teil 5: Anforderungen an die Produkte, Konformitätsverfahren und -bewertung für Fahrzeugrückhaltesysteme This European Standard was approved by CEN on 28 September 2006 and includes Amendment 1 approved by CEN on 30 May 2008 and Amendment 2 approved by CEN on 23 January CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E U R O P É E N D E N O R M A LIS A T I O N EUROPÄIS C HES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN :2007+A2:2012: E

6 SS-EN :2007+A2:2012 (E) (E) Contents Foreword... 3 Introduction Scope... 5 Normative references... 5 Terms and definitions... 6 Requirements... 6 Performance under impact... 6 Height of combined vehicle/ pedestrian parapets... 7 Durability... 7 Technical description of the vehicle restraint system (VRS)... 8 General... 8 Product description... 8 Details of system modifications... 8 Installation requirements... 8 Evaluation of conformity... 9 General... 9 Type testing... 9 Factory Production Control (FPC) Prototype products Cases of technical specification non-compliance Installation of road restraint systems Annex A (normative) Modification of VRS tested in accordance with EN , #EN $, EN or ENV Annex B (informative) Example list of cases of possible modifications to the requirements of Clauses 4, 5 and Annex C (normative) #Resistance to snow removal$ Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive Bibliography Page 2

7 SS-EN :2007+A2:2012 (E) Foreword This document (EN :2007+A2:2012) has been prepared by Technical Committee CEN/TC 226 Road equipment, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012 and conflicting national standards shall be withdrawn at the latest by September This document includes Amendment 1, approved by CEN on and Amendment 2, approved by CEN on This document supersedes #EN :2007+A1:2008$. The start and finish of text introduced or altered by amendment is indicated in the text by tags!" and # $. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of this document and the following parts under the general title: Road restraint systems. Part 1: Terminology and general criteria for test methods Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers Part 6: Pedestrian restraint system According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. 3

8 SS-EN :2007+A2:2012 (E) (E) Introduction #This document is a product standard for vehicle restraint systems placed on the market. This document is designed for use in conjunction with Parts 1, 2, 3, ENV 1317 part 4 (to be replaced with pren 1317 part 4 and 7). To ensure the full performance of road restraint systems in use, their production and installation is intended to be controlled in accordance with this document.$ 4

9 SS-EN :2007+A2:2012 (E) 1 Scope This European Standard specifies requirements for evaluation of conformity of the following vehicle restraint systems: a) safety barriers; b) crash cushions; c) terminals (will be effective when ENV becomes an EN); d) transitions (will be effective when ENV becomes an EN); e) vehicle / pedestrian parapets (only for the vehicle restraint function). Pedestrian parapet requirements are not covered in this document. Requirements for the evaluation of durability with respect to weathering are included in this document. Requirements for other forms of durability (e.g. marine environment, sand abrasion) are not included. Temporary barriers are not within the scope of this document. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 206-1, Concrete Part 1: Specification, performance, production and conformity!en 335-1, Durability of wood and wood-based products Definition of use classes Part 1: General EN 335-2, Durability of wood and wood-based products Definition of use classes Part 2: Application to solid wood" EN , Road restraint systems Part 1: Terminology and general criteria for test methods #EN :2010, Road restraint systems Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets$ #EN :2010$, Road restraint systems Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions #ENV :2001$, Road restraint systems Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers pren , Road restraint systems Pedestrian restraint systems, pedestrian parapet #EN 10346, Continuously hot-dip coated steel flat products Technical delivery conditions$ EN 13369, Common rules for precast concrete products EN ISO 1461, Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods (ISO 1461:1999) #EN ISO 9001:2008, Quality management systems Requirements (ISO 9001:2008)$ 5

10 SS-EN :2007+A2:2012 (E) (E) 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 testing laboratory competent laboratory, which measures, examines, tests, calibrates or otherwise determines the characteristics or performance of materials or products within the scope of this document. A laboratory accredited by a signatory of EA (European co-operation for accreditation) or the appropriate statutory instrument, within the scope of this document, in the territory where the test was executed may be presumed to be competent 3.2 working life period of time during which the performance of a product will be maintained at a level that enables the product to fulfil the requirements of this document (i.e. the essential characteristics of a product to meet or exceed minimum acceptable values, without incurring major costs for repair or replacement). The working life of a product depends upon its inherent durability and normal maintenance NOTE A clear distinction should be made between the assumed economically reasonable working life for a product, which underlies the assessment of durability in technical specifications, and the actual working life of a product in a works. The latter depends on many factors beyond the control of the producer, such as design, location of use (exposure), installation, use and maintenance. The assumed working life can thus not be interpreted as being a guarantee given by the producer. 3.3 durability ability of a product to maintain its required performance over time, under the influence of foreseeable actions. Subject to normal maintenance, a product should enable properly designed and executed works to fulfil specified requirements for an economically reasonable working life of the product 3.4 manufacturer (synonymous with producer ) organization with legal responsibility for placing a CE-Mark on a product (see Annex ZA) 4 Requirements 4.1 Performance under impact Safety barriers Safety barriers shall be tested to and shall conform to the requirements of EN and #EN $ Vehicle parapets Vehicle parapets shall be tested to and shall conform to the requirements of EN and #EN $ Crash cushions Crash cushions shall be tested to and shall conform to the requirements of EN and EN Terminals Terminals shall be tested to and shall conform to the requirements of EN and ENV (will be effective when ENV becomes an EN). 6

11 SS-EN :2007+A2:2012 (E) Transitions Transitions shall be tested to and shall conform to the requirements of EN and ENV (will be effective when ENV becomes an EN) Combined vehicle / pedestrian parapets Vehicle / pedestrian parapets shall be tested to and shall conform to the requirements of EN and #EN $ and pren (will be effective when pren becomes an EN) Threshold levels Vehicle restraint systems shall conform to the minimum threshold levels defined in Table 1. Table 1 Minimum threshold levels for vehicle restraint systems Safety barriers EN (in accordance with Table 2) N1 Crash cushions EN (in accordance with Table 3) Class 50 Terminals ENV (in accordance with Table 1) P1 Transitions ENV (in accordance with 4.2) N1 Combined vehicle/parapets EN (in accordance with Table 2) and pren N1 4.2 Height of combined vehicle/ pedestrian parapets The height of combined vehicle / pedestrian parapets shall conform to pren (will be effective when pren becomes an EN). 4.3 Durability All vehicle restraint systems shall be durable for an economically reasonable working life, for which a reviewable experience-based description and / or related measurements of durability shall be adequate. Road restraint systems can have foundation systems, the economically reasonable working life of which relates to the supporting structure, and this needs to be reported separately to that of the road restraint system if supplied by the VRS manufacturer. a) Manufacturer shall declare the materials and protective coatings used on the road restraint system; b) manufacturer shall declare an assessment of durability including the identification of technical characteristics of materials affecting durability, and the methods of evaluation (e.g. coating mass determination, adhesion testing). Issues affecting durability may include the following examples: c) specification of protective coating in accordance with EN ISO 1461 and EN and/or level of treatment of materials; d) composition and thickness of material in accordance with EN for concrete and EN for precast concrete; 7