SVENSK STANDARD SS-EN ISO 17405:2014

Transkript

1 SVENSK STANDARD SS-EN ISO 17405:2014 Fastställd/Approved: Publicerad/Published: Utgåva/Edition: 1 Språk/Language: engelska/english ICS: Oförstörande provning Ultraljudprovning Tekniker för provning av pläteringar tillverkade genom svetsning, valsning eller explosionssvetsning (ISO 17405:2014) Non-destructive testing Ultrasonic testing Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014)

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN ISO 17405:2014 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 17405:2014. The European Standard EN ISO 17405:2014 has the status of a Swedish Standard. This document contains the official version of EN ISO 17405:2014. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Oförstörande provning, SIS / TK 125. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

4

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM Provläsningsexemplar / Preview EN ISO July 2014 ICS English Version Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2014) Essais non destructifs - Essais par ultrasons - Technique d'essai des placages produits par soudage, laminage et explosion (ISO 17405:2014) Zerstörungsfreie Prüfung - Ultraschallprüfung - Techniken zur Prüfung von Plattierungen hergestellt durch Schweißen, Walzen und Sprengen (ISO 17405:2014) This European Standard was approved by CEN on 21 June CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17405:2014 E

6 SS-EN ISO 17405:2014 (E) Provläsningsexemplar / Preview Contents Page Foreword...iv 1 Scope Normative references Terms and definitions Ultrasonic test system General Requirements regarding probes Additional requirements Instrument settings Preparation of the test object Test procedure General Movement of probe Checking the instrument setting Recording levels Test report... 8 Annex A (informative) Determination of focal zone...10 Bibliography...11 iii

7 SS-EN ISO 17405:2014 (E) Foreword This document (EN ISO 17405:2014) has been prepared by Technical Committee ISO/TC 135 "Nondestructive testing" in collaboration Technical Committee CEN/TC 138 Non-destructive testing the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at the latest by January Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17405:2014 has been approved by CEN as EN ISO 17405:2014 without any modification. iv

8

9 SS-EN ISO 17405:2014 (E) Non-destructive testing Ultrasonic testing Technique of testing claddings produced by welding, rolling and explosion 1 Scope This International Standard specifies the techniques for manual ultrasonic testing of claddings on steel applied by welding, rolling, and explosion using single-element or dual-element probes. The test is intended to cover detection of two-dimensional or three-dimensional discontinuities in the cladding and in the region of the interface. This International Standard does not give acceptance criteria nor define the extent of testing. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2400, Non-destructive testing Ultrasonic testing Specification for calibration block No. 1 EN , Non-destructive testing Terminology Part 4: Terms used in ultrasonic testing EN , Non-destructive testing Characterization and verification of ultrasonic examination equipment Part 1: Instruments EN , Non-destructive testing Characterization and verification of ultrasonic examination equipment Part 2: Probes EN , Non-destructive testing Characterization and verification of ultrasonic examination equipment Part 3: Combined equipment 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN and the following apply. 3.1 test object part to be tested 3.2 test surface areas of the surface of the test object to which probes have to be coupled 4 Ultrasonic test system 4.1 General The ultrasonic pulse-echo technique is used. For two-dimensional discontinuities parallel to the test surface and three-dimensional discontinuities, straight beam probes (dual-element or single-element) shall be used for testing with longitudinal waves. 1

10 SS-EN ISO 17405:2014 (E) Provläsningsexemplar / Preview For discontinuities with any other orientation, dual-element angle beam probes for longitudinal waves can be used. The nominal frequency shall be selected according to the purpose of the test and the characteristics of the materials. Frequencies from 2 MHz to 6 MHz should be preferred. The instrument used shall comply with the requirements given in EN , and the probes shall comply with the requirements of EN The whole test system shall be checked by the operator periodically as given in EN Requirements regarding probes Single-element straight beam probes for longitudinal waves A depth zone providing optimum sensitivity is defined (see Annex A) by the size of the transducer used in the probes. The position of this zone should be selected according to the expected position of the discontinuities Dual-element straight-beam probes for longitudinal waves A depth zone providing optimum sensitivity is defined (see Annex A) by the size of the transducers used in the probes and their roof angle. The position of this zone should be selected according to the expected position of the discontinuities Dual-element angle beam probes for longitudinal waves The beam angle should be between 65 and 80. The skewing angle, and the shape and size of the transducers, shall be selected so that the depth range for optimum sensitivity (see Annex A) covers the expected position of the discontinuities Matching probes to curved surfaces The distance between the surface and the contact surface of the probe shall not exceed 0,5 mm when the centre of the probe is in contact. To achieve this, a flat probe shall be matched to the curvature of the test object by grinding, using adaptors or other aids if the radius of curvature, R, is within the range A R < P 2 4 mm (1) where R A P is the radius of the curvature of the surface, in mm; is the dimension of the contact surface of the probe in the direction of curvature, in mm, i.e. for testing cylindrical parts in the longitudinal direction, it is the width, and for testing in the circumferential direction, it is the length of the contact surface. 4.3 Additional requirements Test ranges There shall be a facility for an expanded time base ( zoom mode ). 2

11 SS-EN ISO 17405:2014 (E) Echo width The echo width visible on the screen shall be taken into account when assessing the suitability for coverage of the selected depth zone. This applies to all types of probes: single-element straight beam probes, dual-element straight beam probes, and dual-element angle beam probes. 4.4 Instrument settings Range setting Range setting of the ultrasonic instrument for accurate localization of discontinuities when using dualelement probes can be carried out using reference blocks (see Reference [2]) as shown in Figure 1 or Figure 2 for example, made of materials that are similar to the test object, or it can be carried out on the test object itself. In the case of a dual-element straight-beam probe, the probe can, for example, be placed on the various steps of a stepped wedge calibration block. The front edge of the associated echo shall be set on the appropriate marks on the screen by adjusting the zero shift and the sweep (velocity). When dual-element angle-beam probes are used on a reference block as shown in Figure 2, for example, the shortened projected distances (distance between the front edge of the probe and the projection of the reflection point on the test surface) shall be lined up with the appropriate marks on the screen. In this manner, it is possible to read the position of a reflection point directly on the screen, i.e. for the setting with shortened projected distances as well as with depth positions. NOTE 1 It is recommended to mark the range of any discontinuities to be detected on the screen according to their depth position (normally corresponding to the thickness of the cladding). When straight beam probes are used, the range of the ultrasonic instrument can be calibrated using multiple echo series from a plane-parallel steel plate of known thickness and sound velocity (e.g. calibration block No. 1 according to ISO 2400). NOTE 2 Since when dual-element angle beam probes are used for longitudinal waves, transverse waves are also generated, care has to be taken to ensure that no erroneous indications of transverse waves are used during the setting procedure. In any case, these indications have a considerable larger time-of-flight than those of longitudinal waves. 3