SVENSK STANDARD SS-EN 12467:2012+A2:2018

Transkript

1 SVENSK STANDARD SS-EN 12467:2012+A2:2018 Fastställd/Approved: Utgåva/Edition: 1 Språk/Language: engelska/english ICS: Takprodukter Släta plattor av fibercement Krav och provningsmetoder Fibre-cement flat sheets Product specification and test methods

2 Standarder får världen att fungera SIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet. Delta och påverka Som medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch. Ta del av det färdiga arbetet Vi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver allt från enskilda standarder, tekniska rapporter och standardpaket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem. Utveckla din kompetens och lyckas bättre i ditt arbete Hos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter. Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på eller ta kontakt med oss på tel Standards make the world go round SIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation. Take part and have influence As a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field. Get to know the finished work We offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them. Increase understanding and improve perception With SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations. If you want to know more about SIS, or how standards can streamline your organisation, please visit or contact us on phone +46 (0)

3 Europastandarden EN 12467:2012+A2:2018 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN 12467:2012+A2:2018. Denna standard ersätter SS-EN 12467:2012+A1:2016, utgåva 1. The European Standard EN 12467:2012+A2:2018 has the status of a Swedish Standard. This document contains the official version of EN 12467:2012+A2:2018. This standard supersedes the SS-EN 12467:2012+A1:2016, edition 1. Copyright / Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Användningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor. Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document. Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon Standarder kan beställas hos SIS som även lämnar allmänna upplysningar om svensk och utländsk standard. Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone Standards may be ordered from SIS, who can also provide general information about Swedish and foreign standards. Denna standard är framtagen av kommittén för Takprodukter och taksäkerhet, SIS / TK 193. Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på - där hittar du mer information.

4

5 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 12467:2012+A2 April 2018 ICS Supersedes EN 12467:2012+A1:2016 English Version Fibre-cement flat sheets - Product specification and test methods Plaques planes en fibres-ciment - Spécifications du produit et méthodes d'essai Faserzement-Tafeln - Produktspezifikation und Prüfverfahren This European Standard was approved by CEN on 24 November 2015 and includes Amendment 2 approved by CEN on 9 November CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12467:2012+A2:2018 E

6 Contents Page European foreword Scope Normative references Terms and definitions Symbols and abbreviations Requirements General Composition Appearance and finish Classification General Category A Category B Category C Category D Groups of sizes Dimensions and tolerances General Nominal length and width Thickness Tolerances on nominal dimensions Tolerances on shape Physical requirements and characteristics General Apparent density Moisture movement Mechanical characteristics Bending strength (MOR) Modulus of elasticity (MOE) Water impermeability for Categories A, B and D Water vapour permeability for Category D Durability requirements General Freeze-thaw for Categories A, B and D Heat-rain for Categories A and B Warm water for Categories A, B, C and D Soak-dry for Categories A, B, C and D Fire and safety Reaction to fire Release of dangerous substances Product information !Assessment and verification of constancy of performance AVCP General Type testing General Test samples, testing and compliance criteria Test reports

7 6.3 Factory production control (FPC) General Requirements Product specific requirements Initial inspection of factory and of FPC Continuous surveillance of FPC Procedure for modifications Inspection of a consignment of finished products Test methods General Dimensional and geometrical tests Preparation of specimen Apparatus Procedure Expression and interpretation of results Tests for physical performance and characteristics Apparent density Mechanical characteristics - Bending strength Modulus of elasticity (Bending modulus) Water impermeability Water vapour permeability Warm water Soak-dry Moisture movement test Tests for climatic performance Freeze-thaw Heat-rain Test for reaction to fire performance Sheets satisfying the requirements for the fire reaction Class A1 without the need for testing Other sheets Marking, labelling and packaging Annex A (normative) Consignment inspection sampling Annex B (normative) Statistical method for determining the corresponding wet values or revised dry specifications for the MOR when carrying out the dry method of test or when tested prior to coating for quality control purposes B.1 Procedure B.2 Determination of the correlation between the results of testing wet and dry specimens B.3 Determination of the regression line B.4 Determination of a value for wet testing from an obtained value for dry testing B.5 Determination of the minimum value specified for dry testing xstd corresponding to the minimum value specified for wet testing in this document ystd Annex C (normative) Test method for the determination of moisture movement characteristic of fibre-cement sheets C.1 General C.2 Principle C.3 Apparatus C.4 Specimen preparation C.5 Test procedure C.6 Calculation of results C.7 Test report

8 Annex ZA (informative) #Relationship of this European Standard with Regulation [EU] No. 305/ ZA.1 Scope and relevant characteristics ZA.2 System of Assessment and Verification of Constancy of Performance [AVCP] ZA.3 Assignment of AVCP tasks Bibliography

9 European foreword This document (EN 12467:2012+A2:2018) has been prepared by Technical Committee CEN/TC 128 Roof covering products for discontinuous laying and products for wall cladding, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2018, and conflicting national standards shall be withdrawn at the latest by January Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 24 November 2015 and Amendment 2, approved by CEN on 9 November This document supersedes #EN 12467:2012+A1:2016$. The start and finish of text introduced or altered by amendment is indicated in the text by tags!" and #$.!In comparison with EN 12467:2004, the following sections in EN 12467:2012 had been changed or added:" 3.9, 3.10, 4, 5.1.1, 5.4.3, 5.4.4, Table 7, Table 8, 7.3.2, , , , 7.3.7, and Annex C. Annex ZB concerning the EC Directive 76/769/EEC!had been deleted". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with #EU Regulation No 305/2011", see informative Annex ZA, which is an integral part of this document. A distinction!had been made" between product appraisal (type tests) and factory production control requirements (acceptance tests). The performance of a building part constructed with these sheets depends not only on the properties of the product as required by this document, but also on the design, construction and installation of the component as a whole in relation to the environment and conditions of use. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 5

10 1 Scope This European Standard specifies the technical requirements and establishes methods of inspection and test as well as acceptance conditions for fibre-cement flat sheets, siding shingles and planks (referred to as sheets later in this document) for one or more of the following uses: internal wall and ceiling finishes; external wall and ceiling finishes. Products covered by this European Standard can be used for other purposes provided they comply with the relevant application standard, e.g. rigid underlays. This European Standard covers sheets reinforced with fibres of different types as specified in This European Standard does not cover sheets for fire protection purposes. This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 197-1, Cement Part 1: Composition, specifications and conformity criteria for common cements EN , Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN ISO 1716, Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) (ISO 1716) EN ISO 12572, Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method (ISO 12572) ISO 2602, Statistical interpretation of test results Estimation of the mean Confidence interval ISO , Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO , Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL 6

11 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 acceptance test test to establish whether a batch of sheets conforms to a specification and which is performed on samples drawn either from continuous production or from a consignment Note 1 to entry: Test methods, specifications and limit values are specified in this document. Sampling levels and acceptance criteria are specified in initial type test test carried out to demonstrate conformity with the requirements of this document or for the approval of a new product and/or when a fundamental change is made in formulation and/or #manufacturing process$, the effects of which cannot be predicted on the basis of previous experience Note 1 to entry: batch. The test is performed on the as delivered product, but is not required for each production 3.3 acceptable quality level (AQL) quality level which in a sampling plan corresponds to a specified, relatively high probability of acceptance Note 1 to entry: It is the maximum percent defective (or maximum number of defects per 100 units) that for purposes of sampling inspection can be considered satisfactory as a process average. Note 2 to entry: A sampling scheme with an AQL of 4 % means that batches containing up to 4 % defective items have a high probability of acceptance. 3.4 apparent density density based on the external dimensions of the sample to calculate the volume Note 1 to entry: This is an average density of material and pores. 3.5 as delivered same condition as the producer intends to supply the product after completing all aspects of the process including maturing and, when appropriate, painting 3.6 upper face face normally exposed 3.7 under face reverse of upper face 3.8 textured sheets sheets which have a relief pattern embossed or applied as a coating on their upper face before delivery 7